06-12-2012, 07:08 PM | #1 |
|
FS: Non-BA Amp Install Harness
I have an extra harness for the PAC AA-GM44. I am willing to modify it just like I did mine. This will allow you to add an amp with 4-channels to your non-Boston Acoustics equipped Camaro.
The harness will send 4-channel speaker level inputs to your amp and a remote amp signal. You can then send the amplified signal for the front doors back into this harness, so that you do not have to run wires into your doors. Check out my thread: http://camaro5.com/forums/showthread...1&postcount=16 This is a picture of the harness currently installed in my car. I am willing to sell the harness, without or without my modifications for $25 + shipping. If you would like the RCA adapters, they are $15.00 each, for the Kickers, or $10 each for the JLs. I am willing to add them for you, for $30 or $20, respectively, or you can add them yourself. |
02-17-2013, 01:18 PM | #2 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
I might be interested, I commented in your other thread about your install!
|
02-19-2013, 08:42 PM | #3 |
|
Weird, no interest in 8 months and now I have 3 PMs in one day. I'm out of town right now. I should be home this weekend. I still have the harness. Also, ******** now sells a version of this harness too.
|
03-09-2013, 12:26 PM | #4 |
Drives: Black vert v6 2012 Join Date: Jun 2012
Location: Nyc
Posts: 31
|
Did you sell this yet I'm interested
|
03-09-2013, 12:34 PM | #5 |
|
Not yet. I PMd everyone after I got back in town and no one replied.
|
04-02-2013, 05:35 PM | #6 |
Drives: Camaro 1LT Join Date: Feb 2013
Location: LI NY
Posts: 11
|
Can this be used with JL XD700/5?
|
04-04-2013, 05:22 AM | #7 |
|
|
04-04-2013, 10:27 AM | #8 |
SoCaL MaYheM oR NoThInG!
Drives: 2010 Camaro 2SS L99 Join Date: Oct 2012
Location: West Los Angeles 310
Posts: 208
|
is this the same as ******** Exclusive 2010 & Up Camaro Plug & Play RCA Output T-Harness For Factory Boston Amp V3.0 *Hot Product*
http://********.com/product_info.php...roducts_id=204 |
05-04-2013, 09:43 PM | #9 |
Drives: 2011 1LS Join Date: May 2013
Location: OKC
Posts: 6
|
Nope thats for with boston acoustics. The one in this thread is for without ba. I'm trying to find it forwithout BA. Sub thump seems to no longer have it
|
12-09-2013, 05:23 PM | #10 |
Do you still have this? I am trying to install a 4 channel amp to go along with my 6.5 type Rs and 6x9 alpines for my 2013 1LS non BA. Ive been looking everywhere for a diy or some info on what I need. I am not trying to splice and mess with too much of the stock wiring incase I ever have to go back to stock but I will do what I have to. Any suggestions?
|
|
|
|
|
|