You are browsing camaro5 
 |
|
09-27-2010, 09:44 PM
|
#1 |
|
Account Suspended
Drives: 2011 RJT 1SS Join Date: Apr 2010
Location: Fort Lewis, Washington
Posts: 730
 |
GM cam gear timing mark?
I'm guessing the factory timing mark on the cam gear is the beveled slot looking thing next to a tooth? Its the only thing I could see that remotely resembled a timing mark. Guess we'll see here in 3-4 hours once i change the springs and put her back together
|
|
|
|
09-28-2010, 09:21 AM
|
#2 |
|
Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,170
|
Try this...
Let us know how she comes out. |
|
|
|
|
09-28-2010, 06:31 PM
|
#3 |
|
Account Suspended
Drives: 2011 RJT 1SS Join Date: Apr 2010
Location: Fort Lewis, Washington
Posts: 730
|
Yep. Mine looked exactly like yours, but with no red dot. I just used the bevel slot, since (like in your picture) its in the same spot anyway.
|
|
|
|
|
09-28-2010, 06:50 PM
|
#4 |
|
Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,170
|
Cool...this is an LS9 but it will give the same idea hopefully.
Let us know how it works out for you and good luck man! Ivan 
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| how to get best 0-60MPH on L99 | Moonlight | Dragstrip and Launch Techniques Discussion | 52 | 01-03-2012 09:59 PM |
| Parts needed for a DIY cam install and estimated cost? | robertway | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 1 | 08-09-2010 09:06 AM |
| Interesting article on LSA powered 2010 Camaro | Sax1031 | Camaro ZL1 Forum - ZL1 Specific Topics | 43 | 05-26-2010 07:30 PM |
| L99 A6 (D or M -always starts you out in 1st gear) | SGOS252382 | Dragstrip and Launch Techniques Discussion | 3 | 04-20-2010 06:27 PM |
| Cam gear question | 4xchamp | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 2 | 04-16-2010 07:01 PM |
