ADM BUILDS ZL1 417 CID STEALTH (1100HP build) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ADM PERFORMANCE · 05-04-2013, 07:30 AM

As the title says,We had to build a car that would not throw attention to what lies underneath,but it had to be big.

The customer requested that the only way he would allow us to do this job is i he could hand the keys to his wife and she never knew anything was done...Wifes know all...Or do they?

We startd with a Brand new 2013 Black Zl1 Automatic(wife approval).

Recipe:

ADM BUILT 417 - CALLIES CRANK,FORGED RODS ,FORGED PISTONS
ADM STAGE 2 HEADS
ARP HEAD STUDS
LPE GT-11 (STEALTHY CAM)
STOCK ROCKERS
STOCK PUSHRODS
STOCK OIL PUMP
3 BOLT CAM GEAR AND DAMPNER BLOCK
STOCK TORQUE CONVERTER(WIFE APPROVED)
STOCK 1.9 LITER BLOWER
2.55 PULLEY UPPER
9.55 LPE RING
LPE DAMPNER
ADM RACE INTAKE WITH WASHER BOTTLE
ADM HD HEAT EXCHANGER
AUTOCAL BY EFILIVE FOR 3 TUNES(93 OCTANE,114OCTANE,NITROS)
STAINLESS WORKS SP HEADERS
ADM EXHAUST CONTROL(KEEPS FLAPS CLOSED)
ID 850 INJECTORS
ADM DUAL FUEL PUMP SYSTEM 1000+HP
KENNEBELL DUAL 20VOLT BOOSTAPUMP
WELDON REGULATOR
ADM LINE LOCK
ADM SPRAYBAR DIRECT PORT BLOWER SPACER NITROUS SYSTEM
REMOTE BOTTLE OPENER
LPE NITROS CONTROLLER
ADM PURGE SYSTEM
NGK TR7IX PLUGS
STOCK TIRES
STOCK GEARS
OPTIMA DEEP CYCLE BATTERY
100% HIDDEN INSTALL
POSSIBLY WELD AND HOOSIER DRAG PACK

Enjoy

Quote:

Originally Posted by ADM PERFORMANCE

Spent 4 hrs logging data and dialing in the car on the street.We now have everything we need to move forward to what we believe to be the:

HIGHEST HP 2013 ZL1 AUTOMATIC BUILT

First pull on the dyno - Shakedown run - 9.15 lower 2.55 upper 91 octane low timing - Listen for the exhaust opening as I Forgot midway through the run LOL

Quote:

Originally Posted by ADM PERFORMANCE

946 rwhp turning the nitrous down progressively at 140 mph

ADM PERFORMANCE · 05-04-2013, 07:36 AM

In order to install a nitros system completey hidden we had to creat room.

We start by removing the factory battery and tray.

We then move on to coming up with a good sealed battery that would allow fitimint of a nitros bottle in the very center of the battery well.We found one that would take the demand of all the electronics required in a car this demanding.Optima makes a Very thin Yellow top that will lay flat..we got it on order and now time to build the mount.

ADM PERFORMANCE · 05-04-2013, 07:55 AM

Now that we have somone on the car ,Its time for me to build the engine.

Out with the old:

While the original is getting disassembled I moved forward :

Sack Rat 2SS · 05-04-2013, 09:00 AM

ADM SPRAYBAR DIRECT PORT BLOWER SPACER NITROUS SYSTEM

Can you elaborate a little on what this is?

ADM PERFORMANCE · 05-04-2013, 09:41 AM

Quote:

Originally Posted by Sack Rat 2SS

ADM SPRAYBAR DIRECT PORT BLOWER SPACER NITROUS SYSTEM

Can you elaborate a little on what this is?

In time!

KKreme15 · 05-04-2013, 09:47 AM

Quote:

Originally Posted by Sack Rat 2SS

ADM SPRAYBAR DIRECT PORT BLOWER SPACER NITROUS SYSTEM

Can you elaborate a little on what this is?

A system with two bars that directly stay nitrous into the cylinders. Also comes with a great cooling effect

ayousef · 05-04-2013, 10:32 AM

whats this exhaust thing that keeps the valves shut, do they stay shut the whole time, or is the mode selectable?

ADM PERFORMANCE · 05-04-2013, 11:01 AM

Quote:

Originally Posted by ayousef

whats this exhaust thing that keeps the valves shut, do they stay shut the whole time, or is the mode selectable?

This car is either open or closed

Trackman · 05-07-2013, 12:16 AM

Subscribed.

fcu678 · 05-07-2013, 10:11 AM

Subscribed

ADM PERFORMANCE · 05-07-2013, 06:52 PM

Moving forward we can now get into the good stuff.

ADM Fuel system

Sent from my iPhone 6

ADM PERFORMANCE · 05-07-2013, 08:09 PM

ADM PERFORMANCE · 05-07-2013, 09:01 PM

Camaro21 · 05-07-2013, 09:06 PM

As usual, great work Andy!!

Sent from Camaro21's Tapatalk

05-04-2013, 07:36 AM	#2
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	We start by making room In order to install a nitros system completey hidden we had to creat room. We start by removing the factory battery and tray. We then move on to coming up with a good sealed battery that would allow fitimint of a nitros bottle in the very center of the battery well.We found one that would take the demand of all the electronics required in a car this demanding.Optima makes a Very thin Yellow top that will lay flat..we got it on order and now time to build the mount. Last edited by ADM PERFORMANCE; 05-04-2013 at 09:40 AM.

05-04-2013, 07:55 AM	#3
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	Move on to the engine Now that we have somone on the car ,Its time for me to build the engine. Out with the old: While the original is getting disassembled I moved forward :

05-04-2013, 09:00 AM	#4
Sack Rat 2SS Drives: Silver SS/RS, Man 6 Join Date: Apr 2009 Location: DFW area, Texas Posts: 884	ADM SPRAYBAR DIRECT PORT BLOWER SPACER NITROUS SYSTEM Can you elaborate a little on what this is? __________________ Silver 2SS/RS Man/6 CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears

05-04-2013, 10:32 AM	#7
ayousef Drives: 2013 ZL1 Join Date: Oct 2012 Location: Dubai Posts: 757	whats this exhaust thing that keeps the valves shut, do they stay shut the whole time, or is the mode selectable? __________________ 1150bhp Whipple 4.0 Supercharged 427ci Camaro ZL1

05-07-2013, 10:11 AM	#10
fcu678 5Th Gen (Craig) Drives: 2014 C7 Join Date: Oct 2008 Location: Houma, Louisiana Posts: 766 View My Garage	Subscribed __________________ 2014 C7

05-07-2013, 12:16 AM	#9
Trackman Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010 Location: Alberta Posts: 1,408	Subscribed.

05-07-2013, 06:52 PM	#11
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	So we have progress Moving forward we can now get into the good stuff. ADM Fuel system Sent from my iPhone 6 Last edited by ADM PERFORMANCE; 05-07-2013 at 08:31 PM.

05-07-2013, 08:09 PM	#12
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	Progress Last edited by ADM PERFORMANCE; 05-07-2013 at 08:41 PM.

05-07-2013, 09:01 PM	#13
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	Wiring Last edited by ADM PERFORMANCE; 05-07-2013 at 09:22 PM.

05-07-2013, 09:06 PM	#14
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,041 View My Garage	As usual, great work Andy!! Sent from Camaro21's Tapatalk