02-19-2013, 12:38 PM | #1 |
Drives: 2012 2SS M6 Join Date: Dec 2011
Location: Phoenix, AZ
Posts: 768
|
What size is the boost/vacuum connection on the Magnuson?
I'm getting ready to install an ADM boost gauge and need to go buy some hose to run from the supercharger to the sender. I can see the outlet on the rear passenger side of the Magnuson but I'm not that good at eyeballing the size of these things and I'd really like to buy the right size hose the first time. It's in an awkward place to try to measure it, so if someone who has already done this could tell me what size hose to buy that would help a lot. Otherwise I'm going to have to just guess, and I'd be willing to bet my first guess would be wrong.
__________________
2012 2SS Convertible
Magnuson, Headers, Cam, JRE Tune. 563 HP. |
02-19-2013, 01:17 PM | #2 |
Drives: 2012 camaro 1SS/RS LS3 Join Date: Oct 2012
Location: Downingtown pa.
Posts: 94
|
I think is a 3/16 nipple if I remember right.
__________________
|
02-19-2013, 05:42 PM | #3 |
Drives: 2008 Pontiac G8GT Join Date: May 2010
Location: WA
Posts: 39
|
I used 5/32 hose on my install.
__________________
2008 PBM G8GT, TVS1900, Patrick G cam, Lonnies Double Pumper, Kooks 1 7/8 Mids, Corsa Cat-back, Patrick G Tuned, RotoFab w/ HSRK, BP Catch Can, Pedders Lowered Touring Suspension w/ sway bars
|
|
|
Thread Tools | |
|
|