My 1LE V2.0 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dropspeed · 02-15-2017, 10:59 AM

Haven't been around here much lately...figure it was time to post something.

After running the 1LE on track for the last 3 years I took a look at what it would take financially to compete with my friends on track (in race prepped Corvettes, Panoz track car.....ect.) and decide to pull the plug on the 1LE as a dedicated track car. I'm keeping it, but want to drive it on the street more.

Dropped the car off at Rodgers Chevrolet and had them do a few things to "freshen" it up....

Install Hex Vents
Install ZL1 Lower Rockers
Install ZL1 Rear Valance
Paint and install ZTA spoiler
Install Michilen Pilot Sport All season on 2017 OEM 1LE wheels
Used 285/35/20 square so I can keep a spare in the car and run it front or rear (same OD))
New Clutch (not really needed...but slave was leaking)
Trans refresh

I already sold and shipped the AP 9668 Brakes to another member and received a set of C7, Z06 non-CCB calipers with ZL1 rotors to go back on it.

Picked up a 2011 Corvette Grand sport for track days...Rollbar is being powder coated now, AP Brakes, Tow hooks, harnesses, brake ducts.....are all ready to be installed when I have time. 3300lbs vs 3900 is very noticeable.

Nick S · 02-15-2017, 12:17 PM

Nice upgrade for your dedicated track car Matt!

The AP Brakes fit on my car great too BTW! Thanks for a great deal. Seemed like the deal worked out perfect for both of us!

A few pics of the AP brakes on my 1LE!

bkevind · 02-15-2017, 01:10 PM

Nice 'vette.

Maybe it would have been cheaper to swap out your friends for some slower ones? Just a thought...

frenchsquared · 02-15-2017, 01:49 PM

Quote:

Originally Posted by bkevind

Nice 'vette.

Maybe it would have been cheaper to swap out your friends for some slower ones? Just a thought...

I need to do that. My friends are Viper, 2016 Zo6, and 350R. I feel my Z28 will do just fine.

LT1Zob · 02-15-2017, 02:27 PM

Nice!!! Can't wait to see the changes on the 1LE and of course the vette Matt.

Dustin.N · 02-15-2017, 02:38 PM

Are you documenting your Vette build? Where can we follow along?

I've been thinking about getting a C5 Z06.

WHAMMO · 02-15-2017, 06:13 PM

Weight reduction mod list? Thats really light!!

WHAMMO · 02-15-2017, 06:15 PM

Really nice car BTW!

CamaroDreams76 · 02-15-2017, 06:22 PM

Very nice. I was about to buy a ZTA spoiler until I found a used anvil.

How much did the 1LE rims run you if you don't mind me asking?

Dropspeed · 02-15-2017, 06:43 PM

Quote:

Originally Posted by Nick S

Nice upgrade for your dedicated track car Matt!

The AP Brakes fit on my car great too BTW! Thanks for a great deal. Seemed like the deal worked out perfect for both of us!

A few pics of the AP brakes on my 1LE!

Thanks Nick...Yes worked out great. I finally unboxed everything today and no issues!

Quote:

Originally Posted by Dustin.N

Are you documenting your Vette build? Where can we follow along?

I've been thinking about getting a C5 Z06.

Not yet....Probably should. I looked at C5Z06 for a long time...But all the cars I wanted with "lower" mileage were mid/low 20s. For $8K more I picked up a 7 year newer car, w/ drysumped LS3 and all the bells and whistles (4LT). It just made more sense to me.... It is 3300lbs vs 3100 ish for the C5Z. But my roof does come off

Quote:

Originally Posted by WHAMMO

Weight reduction mod list? Thats really light!!

The 3300lbs is the Grand Sport stock weight...3900lbs is my 1SS 1LE, no sunroof + rollbar.

Quote:

Originally Posted by CamaroDreams76

Very nice. I was about to buy a ZTA spoiler until I found a used anvil.

How much did the 1LE rims run you if you don't mind me asking?

I was back and forth between the Anvil and the ZTA...went ZTA after I saw some really good pictures of it.

Gerry at Rodgers made me an offer on the wheels....2 of them had tiny nicks in them on the lip from transport and they cant deliver a car with touch up on it. I paid 1/2 price for two and them a deal on the other 2....basically purchased 3 and got one free. The only issues is the OEM wheels are on back order and I had to wait a week for one and 3 for the other.

Midnight Rat · 02-15-2017, 08:03 PM

Your car is sweet. I wondered what those new 1le wheels would look,like on a 5th gen. Were the offsets the same as the 5th gen? What about the center hub?

Dropspeed · 02-15-2017, 09:00 PM

Quote:

Originally Posted by Midnight Rat

Your car is sweet. I wondered what those new 1le wheels would look,like on a 5th gen. Were the offsets the same as the 5th gen? What about the center hub?

Thanks, Yes the offsets and center bore are the same.

SSEssence · 02-15-2017, 09:03 PM

very nice rides!

Dropspeed · 02-16-2017, 08:31 AM

Added some additional pictures...

Here is another of my "toys" 87 Buick Grand National with 22K original miles...99% unmolested. I plan to sell this one spring/summer. (I think! )

02-15-2017, 10:59 AM	#1
Dropspeed 2013 Camaro SS1LECTSVZ28 Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012 Location: Suburbs of Detroit, MI Posts: 2,440	My 1LE V2.0 Haven't been around here much lately...figure it was time to post something. After running the 1LE on track for the last 3 years I took a look at what it would take financially to compete with my friends on track (in race prepped Corvettes, Panoz track car.....ect.) and decide to pull the plug on the 1LE as a dedicated track car. I'm keeping it, but want to drive it on the street more. Dropped the car off at Rodgers Chevrolet and had them do a few things to "freshen" it up.... Install Hex Vents Install ZL1 Lower Rockers Install ZL1 Rear Valance Paint and install ZTA spoiler Install Michilen Pilot Sport All season on 2017 OEM 1LE wheels Used 285/35/20 square so I can keep a spare in the car and run it front or rear (same OD)) New Clutch (not really needed...but slave was leaking) Trans refresh I already sold and shipped the AP 9668 Brakes to another member and received a set of C7, Z06 non-CCB calipers with ZL1 rotors to go back on it. Picked up a 2011 Corvette Grand sport for track days...Rollbar is being powder coated now, AP Brakes, Tow hooks, harnesses, brake ducts.....are all ready to be installed when I have time. 3300lbs vs 3900 is very noticeable. Attached Images __________________ My 1LE Build/Journal : http://www.camaro5.com/forums/showthread.php?t=351990 Last edited by Dropspeed; 02-16-2017 at 08:28 AM.

02-15-2017, 12:17 PM	#2
Nick S Drives: 2013 Camaro 1LE Join Date: Jul 2012 Location: Verona, WI Posts: 1,924	Nice upgrade for your dedicated track car Matt! The AP Brakes fit on my car great too BTW! Thanks for a great deal. Seemed like the deal worked out perfect for both of us! A few pics of the AP brakes on my 1LE! Attached Images __________________

02-15-2017, 02:27 PM	#5
LT1Zob Drives: 23 LT1 / 19 Z06 / after 6 5th gens Join Date: Jan 2014 Location: MI Posts: 1,984 View My Garage	Nice!!! Can't wait to see the changes on the 1LE and of course the vette Matt. __________________ "Make yourself sheep and the wolves will eat you"

02-15-2017, 06:13 PM	#7
WHAMMO Drives: 13' 1LE Join Date: Apr 2012 Location: Canada Posts: 2,641	Weight reduction mod list? Thats really light!! __________________ 13' 1LE Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me.

02-15-2017, 06:15 PM	#8
WHAMMO Drives: 13' 1LE Join Date: Apr 2012 Location: Canada Posts: 2,641	Really nice car BTW! __________________ 13' 1LE Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me.

02-15-2017, 01:10 PM	#3
bkevind Drives: 2013 2SS RS 1LE Join Date: Aug 2016 Location: Austin Posts: 555 View My Garage	Nice 'vette. Maybe it would have been cheaper to swap out your friends for some slower ones? Just a thought...

02-15-2017, 02:38 PM	#6
Dustin.N Drives: 2014 1SS/1LE Join Date: Sep 2013 Location: Oklahoma Posts: 31	Are you documenting your Vette build? Where can we follow along? I've been thinking about getting a C5 Z06.

02-15-2017, 06:22 PM	#9
CamaroDreams76 Tri-County Camaro SWFL Drives: 2013 IOM 2SS/RS/1LE Join Date: Apr 2013 Location: South West FL Posts: 3,075 View My Garage	Very nice. I was about to buy a ZTA spoiler until I found a used anvil. How much did the 1LE rims run you if you don't mind me asking? __________________ Just bolt ons........ https://www.camaro5.com/forums/showthread.php?t=343023

02-15-2017, 08:03 PM	#11
Midnight Rat Drives: SS 1LE Join Date: Nov 2012 Location: Texas Posts: 1,829	Your car is sweet. I wondered what those new 1le wheels would look,like on a 5th gen. Were the offsets the same as the 5th gen? What about the center hub?

02-15-2017, 09:03 PM	#13
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,801 View My Garage	very nice rides! __________________ 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717

02-16-2017, 08:31 AM	#14
Dropspeed 2013 Camaro SS1LECTSVZ28 Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012 Location: Suburbs of Detroit, MI Posts: 2,440	Added some additional pictures... Here is another of my "toys" 87 Buick Grand National with 22K original miles...99% unmolested. I plan to sell this one spring/summer. (I think! ) Attached Images __________________ My 1LE Build/Journal : http://www.camaro5.com/forums/showthread.php?t=351990