05-12-2015, 08:18 PM | #1 |
Account Suspended
Drives: 2015 1LE Join Date: May 2015
Location: waterloo
Posts: 293
|
What pumps come in the 15 1LE?
What fuel pumps come in a 15 1LE, looking to make 700 rwhp with meth and 95lb injectors. Do I need a BAP, ADM ZL1 FPM or both?
TIA! |
05-12-2015, 08:31 PM | #2 |
Drives: 2010 ss/rs Join Date: Jun 2013
Location: kansas city missouri
Posts: 247
|
the livernois pump will be plenty ,and does not require a module change.
__________________
rotofab cai
ported throttle body sp headers with cats loud mouth axle back no mufflers tuned by steve williams 6l80etuning.com bmr split springs cam motion custom camshaft btr 660 spring kit maggie 2300 id850 injectors livernois fuel pump |
05-12-2015, 08:55 PM | #3 |
Drives: All things Turbocharged Join Date: Dec 2010
Location: AZ
Posts: 1,199
|
Stock pump is same as ZL1 in that car, but the FPCM is not the voltage amp type like a ZL1, so you will want a MSD voltage booster at least. With that set-up we are getting 750whp on completely stock 1LE's with our kit. (up to 806whp on race gas, 100% stock car)
Last edited by AGP Turbo; 05-13-2015 at 06:22 PM. |
05-12-2015, 09:57 PM | #4 |
Drives: 15' SS Join Date: Nov 2013
Location: Norcal
Posts: 39
|
Thanks for that info. Might have to go that route
|
05-13-2015, 07:32 AM | #5 |
Account Suspended
Drives: 2015 1LE Join Date: May 2015
Location: waterloo
Posts: 293
|
Thanks AGP!
|
05-13-2015, 05:24 PM | #6 |
Drives: C7 Z51 Join Date: Mar 2014
Location: Columbus, OH
Posts: 209
|
LE cars have ZL1 pumps. you can take the car to a dealer or someone with Tech-2 and they can reprogram the voltage to run ZL1 pump at full capacity. no need for additional parts.
|
05-13-2015, 05:32 PM | #7 |
Lets roll...
Drives: 14' Join Date: Jun 2014
Location: TX/S.FL
Posts: 1,496
|
Oh snap! When would you say the 1LE would start running out of pump before and after the reprograming?
__________________
|
05-13-2015, 06:01 PM | #8 |
Drives: C7 Z51 Join Date: Mar 2014
Location: Columbus, OH
Posts: 209
|
with control module about 700rwhp. with BAP and FPCM about 800rwhp
|
05-13-2015, 06:07 PM | #9 | |
Lets roll...
Drives: 14' Join Date: Jun 2014
Location: TX/S.FL
Posts: 1,496
|
Quote:
What about with the car (1LE) untouched? How much power will the pump support?
__________________
|
|
05-14-2015, 08:29 AM | #10 |
Drives: 2006 Z06 Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 5,712
|
~550ish untouched, but that depends on power adder/etc. NA, Turbo, PD, N2o, etc. Turbos and NA can get farther than blowers.
__________________
Nick
Corvette Z06 -1200ish rwhp |
07-22-2015, 06:26 PM | #11 |
Account Suspended
Drives: 2015 1LE Join Date: May 2015
Location: waterloo
Posts: 293
|
Can this be done with HPT? Can you transfer all the settings over from a ZL1 on the fuel system tab?
|
07-22-2015, 06:56 PM | #12 |
Too much is never enough!
Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014
Location: Toledo,OH
Posts: 4,149
|
Unfortunately not.
__________________
AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq
Build thread http://www.camaro5.com/forums/showth...55#post8107855 |
07-24-2015, 08:52 AM | #13 |
Account Suspended
Drives: 2015 1LE Join Date: May 2015
Location: waterloo
Posts: 293
|
|
07-24-2015, 09:35 AM | #14 |
Drives: 2006 Z06 Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 5,712
|
Because HP tuners can't program or access the FPCM. Need a tech 2 to do that.
__________________
Nick
Corvette Z06 -1200ish rwhp |
|
|
Thread Tools | |
|
|