2016 Camaro Front License Plate Bracket (NO HOLES TO DRILL) @ Phastek Performance - Page 2

Ruebernard · 01-30-2016, 06:53 PM

Installed mine today. Awesome stuff here folks. I know it sucks to have to display a front plate but with this set up it pops off in a nano second!

leadfoot93 · 01-30-2016, 07:36 PM

Quote:

Originally Posted by Ruebernard

Installed mine today. Awesome stuff here folks. I know it sucks to have to display a front plate but with this set up it pops off in a nano second!

Can you take a picture? I want to see how it looks with the Garnet Red. As much as I don't want to put my front plate on, I know I am going to get pulled over as soon as I take my temporary registration sticker off lol

Ricardo@Phastek · 02-04-2016, 02:09 PM

Quote:

Originally Posted by Ruebernard

Installed mine today. Awesome stuff here folks. I know it sucks to have to display a front plate but with this set up it pops off in a nano second!

Quote:

Originally Posted by leadfoot93

Can you take a picture? I want to see how it looks with the Garnet Red. As much as I don't want to put my front plate on, I know I am going to get pulled over as soon as I take my temporary registration sticker off lol

X2 POST UP THOSE PICS!!

Ricardo@Phastek · 02-09-2016, 02:03 PM

Check out the installation video!! Simple installation takes minutes!!

Before:

After:

Techn9cian805 · 02-09-2016, 03:30 PM

Definitely worth it, you can easily take it off with a small pin pull. I have it on my 2014 and will definitely be getting one for my gen6. I want to get the factory front splitter tho, any word on the development for it?

in the mean time, here's a pic of my 2014 with the bracket

SGT Stretch · 03-06-2016, 07:09 PM

This is the route I'll have to go. Local PD here in texas where I am is cool with it being in the windshield. However the Security Forces on base have been all over this and won't allow it on the dash.

Ricardo@Phastek · 03-08-2016, 02:49 PM

StOrM TrOOpEr · 03-31-2016, 12:04 PM

has anyone tried to place this thru the grille? and not under?

Ricardo@Phastek · 03-31-2016, 04:05 PM

Quote:

Originally Posted by StOrM TrOOpEr

has anyone tried to place this thru the grille? and not under?

Went out to the shop car to see if that was possible. Unfortunately not, there is nothing on the bottom side of the bumper for the bracket to sit on. There is something on the top side but the angle I could get the bracket on would not allow the alignment holes to clear the grill.

WCoolBreeze · 03-31-2016, 11:19 PM

Would it be possible to modified this so that it would fit on a 6th Gen SS that did have a Front Splitter installed. From just looking at your video and the pictures, all you would need to do is have a spacer between the part that bolts onto the body of the car and also make the tubes longer on the detachable part..

Walt B.

Ricardo@Phastek · 04-04-2016, 04:28 PM

Ricardo@Phastek · 04-08-2016, 04:55 PM

Go with a trusted name in the industry.

Dont take our word for it. Listen to our customers!!

Techn9cian805 · 04-10-2016, 07:53 PM

Any plans on developing one that works with the chevy splitter? If i remember right, you guys made one for the stock 5th gen and for the ground effects equipped 5th gen. Will we see the same for this generation?

Ricardo@Phastek · 04-11-2016, 12:11 PM

Quote:

Originally Posted by Techn9cian805

Any plans on developing one that works with the chevy splitter? If i remember right, you guys made one for the stock 5th gen and for the ground effects equipped 5th gen. Will we see the same for this generation?

Yes, there is one in the plan.

01-30-2016, 06:53 PM	#15
Ruebernard Drives: 2017 GRT 2SS/RS M6 Vert Join Date: Jan 2014 Location: Oro Valley Posts: 1,200 View My Garage	Installed mine today. Awesome stuff here folks. I know it sucks to have to display a front plate but with this set up it pops off in a nano second! __________________ If it were more fun, it would be illegal!

02-09-2016, 03:30 PM	#19
Techn9cian805 The BEAST Drives: '16 2SS, '89 Wife Join Date: May 2015 Location: Central Coast, CA Posts: 2,034 View My Garage	Definitely worth it, you can easily take it off with a small pin pull. I have it on my 2014 and will definitely be getting one for my gen6. I want to get the factory front splitter tho, any word on the development for it? in the mean time, here's a pic of my 2014 with the bracket __________________ Scarlet: 3/3/16: 2SS Red Hot, M6, Instagram: @luis_what_it_is

03-06-2016, 07:09 PM	#20
SGT Stretch Drives: 2016 Hyper Metallic Blue SS Join Date: Jun 2011 Location: Abilene TX Posts: 588	This is the route I'll have to go. Local PD here in texas where I am is cool with it being in the windshield. However the Security Forces on base have been all over this and won't allow it on the dash. __________________

03-31-2016, 12:04 PM	#22
StOrM TrOOpEr TK-421 Drives: 2012 2SS/RS Summit White #349 Join Date: Mar 2011 Location: BRONX, NY Posts: 860 View My Garage	has anyone tried to place this thru the grille? and not under? __________________ 2012 CAMARO 2SS/RS A6 L99, TPW 7-18-2011 FIRST PRODUCTION WEEK 2012 MODEL #349 "LIKE" me on my FACEBOOK page http://www.facebook.com/stormtroopercamaro2ssrs MY BUILD THREAD: http://www.camaro5.com/forums/showthread.php?t=209482 - COTW 6/25/13

03-31-2016, 11:19 PM	#24
WCoolBreeze 2SS Drives: 2016 2SS, Red Garnet Tint Join Date: Nov 2008 Location: Imperial, CA Posts: 1,343	Would it be possible to modified this so that it would fit on a 6th Gen SS that did have a Front Splitter installed. From just looking at your video and the pictures, all you would need to do is have a spacer between the part that bolts onto the body of the car and also make the tubes longer on the detachable part.. Walt B. __________________ 2016 Camaro 2SS 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) - For Sale Gen6, 2016 Camaro 2SS, Red Garnet Tint (with Silver Rally Stripes) Ordered: 2-12-2016 TPW: 3-7-2016 Built: 3-7-2016 VIN 1G1FH78G0157626 Delivered: 4-26-2016

02-09-2016, 02:03 PM	#18
Ricardo@Phastek Drives: the boss nuts.... Join Date: Aug 2012 Location: Houston, TX Posts: 1,428	Check out the installation video!! Simple installation takes minutes!! Before: After:

03-08-2016, 02:49 PM	#21
Ricardo@Phastek Drives: the boss nuts.... Join Date: Aug 2012 Location: Houston, TX Posts: 1,428

04-04-2016, 04:28 PM	#25
Ricardo@Phastek Drives: the boss nuts.... Join Date: Aug 2012 Location: Houston, TX Posts: 1,428

04-08-2016, 04:55 PM	#26
Ricardo@Phastek Drives: the boss nuts.... Join Date: Aug 2012 Location: Houston, TX Posts: 1,428	Go with a trusted name in the industry. Dont take our word for it. Listen to our customers!!

04-10-2016, 07:53 PM	#27
Techn9cian805 The BEAST Drives: '16 2SS, '89 Wife Join Date: May 2015 Location: Central Coast, CA Posts: 2,034 View My Garage	Any plans on developing one that works with the chevy splitter? If i remember right, you guys made one for the stock 5th gen and for the ground effects equipped 5th gen. Will we see the same for this generation? __________________ Scarlet: 3/3/16: 2SS Red Hot, M6, Instagram: @luis_what_it_is

User Name		Remember Me?
Password