Another catch can believer - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ivan @ Southwest Speed · 10-18-2012, 09:26 PM

No doubt! Easy no brainier mod. There's a reason why everybody has one!

They WORK!

Thanks gang!
Ivan

10-18-2012, 11:25 PM

Quote:

Originally Posted by Ivan @ Southwest Speed

Wish we did. Last order I got came with a a message that Rx was done with polished units al together.

Figure get it raw and have a local guy polish it.

$100 is what it was costing and I'd like to think folk can find a good polisher locally for $100.

Let us know if we can help or be of further assistance to you!

Thanks
Ivan

Hey bud, on the throttle bodies it is very time consuming because we strive for perfection of course. The catch cans will continue to be polished for no cost increase over the base catch can that comes powder-coated or GM paint code matched.

Go through one of our great bunch of dealers above guys. Hard to choose between some of the best vendors on the forum here.

- Matt

Ivan @ Southwest Speed · 10-18-2012, 11:51 PM

There ya go gang! From the source!

Thanks Matt!
Ivan

Wolfco13 · 10-19-2012, 02:11 AM

Quote:

Originally Posted by Wolfco13 on 10-14-2012

Ordered #2704.

Recieved 10-18-2012

Installed in 20 minutes.

With only 3600 miles, there was evidence of oil in the tubing.

Thanks Apex for fast service!

Thanks RX Performance Products for a great product that picks up the slack!

Apex Motorsports · 10-19-2012, 05:25 AM

Quote:

Originally Posted by Bobsled

Looking to buy a polished catch can for my daily driver 2012 V6. Anybody have them in stock and ready to ship?

Quote:

Originally Posted by Apex Chase

I believe we might. Let me check in the morning.

And we do in fact have them.

Bobsled · 10-19-2012, 09:27 PM

Catch can is in route. Left Palmetto FL earlier today.

Little OT but, was the movie titled Palmetto w/ Woody Harelson (sp), Gina Gershon and Elizabeth Shue filmed in Palmetto?

Apex Motorsports · 10-20-2012, 05:37 AM

Quote:

Originally Posted by Wolfco13

Recieved 10-18-2012

Installed in 20 minutes.

With only 3600 miles, there was evidence of oil in the tubing.

Thanks Apex for fast service!

Thanks RX Performance Products for a great product that picks up the slack!

Congrats. Thank you for your order.

SC2150 · 10-20-2012, 06:07 AM

Not sure on the movie....often wondered.

awfarley · 10-20-2012, 09:08 AM

Man I really need to get one of these. Over 19,000 miles since February and I'm sure my car is drowning in oil at this point :(

camaro-21 · 10-20-2012, 02:33 PM

question for tracy or anyone who knows. could you add a bosch electricvacuum pump to the line goin to the catch can and intake manifold to have negative crankcase pressure and possibly add some more power and would it work with the dual valve can

Henry G. · 10-20-2012, 10:45 PM

Quote:

Originally Posted by awfarley

Man I really need to get one of these. Over 19,000 miles since February and I'm sure my car is drowning in oil at this point :(

If you like to rev to 6k and above I would say yes, youre probably right. Put on the can and pay the dealer to clean the intake, start anew.

Compunerd · 10-21-2012, 03:39 AM

I ordered my catch can last night at around 3am from Apex. Just knowing it will be here soon is making me antsy and eager to Seafoam my intake and drive as little as possible and get my oil changed. And the worst part is I know it'll still be a week or so before it gets here.

....I may not survive this.

Blues45th · 10-21-2012, 06:24 AM

I gotta say apex and chase are fast. I ordered cai induction and had it within 2 days. Those guys rock. And I like to see rx Is local to me about 45 min. Away. I might drive down there this week.

.

SC2150 · 10-21-2012, 07:26 AM

A belt driven vacuum pump is the most effective (Moroso, Aerospace Components, etc.) but they wear out in 5-8K miles. The electirc ones we have tried dont last much longer when ingesting the damaging combustion byproducts so good idea, but not practical on the street.

10-20-2012, 02:33 PM	#80
camaro-21 Drives: 2011 cyber grey metallic camaro v6 Join Date: Jun 2011 Location: hampton va Posts: 219	question for tracy or anyone who knows. could you add a bosch electricvacuum pump to the line goin to the catch can and intake manifold to have negative crankcase pressure and possibly add some more power and would it work with the dual valve can __________________ 2011 camaro v6- sts turbo w/ meth injection, barton short throw, spec stage 3+ clutch, forgestar f-14 rims, Nitto invo tires, pfadt sway bars drop springs and end links, rx catch can, goodridge stainless steel brake lines, aac halos afterburner taillights and sidemarkers, sebon carbon rear diffuser.

10-18-2012, 09:26 PM	#71
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	No doubt! Easy no brainier mod. There's a reason why everybody has one! They WORK! Thanks gang! Ivan

10-18-2012, 11:51 PM	#73
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	There ya go gang! From the source! Thanks Matt! Ivan

10-19-2012, 09:27 PM	#76
Bobsled Drives: 2012 Victory Red 1LT/RS Join Date: Oct 2012 Location: So. Cal. Posts: 167	Catch can is in route. Left Palmetto FL earlier today. Little OT but, was the movie titled Palmetto w/ Woody Harelson (sp), Gina Gershon and Elizabeth Shue filmed in Palmetto?

10-20-2012, 06:07 AM	#78
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Not sure on the movie....often wondered.

10-20-2012, 09:08 AM	#79
awfarley Drives: 2011 5.7L Tundra Double-Cab X-SP Join Date: Mar 2012 Location: Birmingham, AL Posts: 2,031	Man I really need to get one of these. Over 19,000 miles since February and I'm sure my car is drowning in oil at this point :(

10-21-2012, 03:39 AM	#82
Compunerd Drives: 2011 1LT SIM Join Date: Apr 2012 Location: Quincy, Illinois Posts: 161 View My Garage	I ordered my catch can last night at around 3am from Apex. Just knowing it will be here soon is making me antsy and eager to Seafoam my intake and drive as little as possible and get my oil changed. And the worst part is I know it'll still be a week or so before it gets here. ....I may not survive this.

10-21-2012, 06:24 AM	#83
Blues45th ......................... Drives: 45th anniversary edition v6 3.6L Join Date: Sep 2012 Location: Dunedin, Florida Posts: 920 View My Garage	I gotta say apex and chase are fast. I ordered cai induction and had it within 2 days. Those guys rock. And I like to see rx Is local to me about 45 min. Away. I might drive down there this week. .

10-21-2012, 07:26 AM	#84
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	A belt driven vacuum pump is the most effective (Moroso, Aerospace Components, etc.) but they wear out in 5-8K miles. The electirc ones we have tried dont last much longer when ingesting the damaging combustion byproducts so good idea, but not practical on the street.