08-27-2013, 09:06 AM | #15 |
Drives: 92 Luminadead/01 Dakota/97 F150 4x4 Join Date: Jul 2009
Location: Eastern, Ky
Posts: 3,789
|
Yeah, as said above, you may want to rethink that GT500, unless they are like that GT driver and well, can't drive.......
|
08-27-2013, 09:39 AM | #16 |
Drives: Mean ass V6 Join Date: Jul 2013
Location: Chicago
Posts: 128
|
Hope the GT 500 is pulling a trailer or has a guy that never drove stick or he is going to smoke you
|
08-27-2013, 09:48 AM | #17 |
Drives: '11 Cammed LS3, '14 Scion FRS Join Date: Dec 2011
Location: Dallas, TX
Posts: 758
|
This may be a Camaro forum, but we aren't stupid. The new GT500 is ridiculously good if you like drag racing (road courses are up for debate). I want one!
__________________
SOLD with a Z06 in the not too distant future: Cammed, boltons, axles, lowered, and more. | 476 WHP |
08-27-2013, 01:13 PM | #18 | |
Drives: 2010 SS, 2000 Pontiac Formula Join Date: Mar 2013
Location: Missouri
Posts: 509
|
Quote:
....Did the 5.0 launch in 3rd? |
|
08-27-2013, 01:20 PM | #19 |
Drives: 2011 2SS/RS, 2010 Mustang GT Join Date: May 2010
Location: Slidell, LA
Posts: 2,412
|
a lot of bench racers in here
|
08-27-2013, 01:29 PM | #20 |
Drives: 2011 camaro ss Join Date: Feb 2013
Location: houston
Posts: 464
|
i went to the track friday and saw a couple of 5.0 running 13s and some modded ones mid 12... so idk why ppl are so surprised some are running 13.6
i raced one the other day i left him so behind low end and on top end he didn't even wanna pull next to me anymore lmao... all i have is a superchip and long tubes and I'm auto |
08-27-2013, 01:31 PM | #21 |
Drives: 2011 camaro ss Join Date: Feb 2013
Location: houston
Posts: 464
|
then again that gt500 better grip wit some slicks and be a real good driver or he will get beat lol well depending what mods the camaro has
|
08-27-2013, 02:18 PM | #22 |
It not brand new. Either 2010-11 GT 500. He spins a lot from stop but from a roll hehas me. Yes those GT-500 ate fast I just wanna beat him. He told me he has the one with 540bhp from factory. He has a tune, performance mufflers from ford I believe. I got Lt, cai, tune and abt to cam it. I know I need a can to hang with him. I like goin n/a. So save money up for heads, vmax tb. If I don't beat him with that I will put turbos on the camaro.
|
|
08-27-2013, 02:23 PM | #23 |
That 5.0 I raced was stock like my SS at the time. We both were running street tires. Both m6 transmission. Yes it was driver error on both ends. My 60ft was 2.20 if I get it lower I should have run a 12.9 or 13.0 probably. Yes track conditions were terrible but its still a win. So I'm ready for a cam now. Shooting for low 12s.
|
|
08-27-2013, 02:34 PM | #24 |
Yes I know exactly what my competition runs stock I just find it funny that it was a bad driver. 5.0 are lighter and actually put down more power than the camaros. I just gotta cut sum weight on the SS and increase power to beat the GT-500. To bad the kid never got better than 13.5s. I gotta work on my 60ft time now.
|
|
08-27-2013, 02:45 PM | #25 | |
10-bolt Destroyer
Drives: 2012 Camaro 2SS/RS - AGM, LS3/6M Join Date: Jun 2012
Location: Canukistan
Posts: 860
|
Quote:
What that means is, even with a shitty launch, hes got more then enough top-end to run us down. I know from personal experience
__________________
2012 Camaro 2SS/RS - LS3/TR6060: Cam, Headers, Exhaust, Intake, Gears, Twin Disk, Suspension, Tuned - 475rwhp, 443rwtq |
|
08-27-2013, 03:15 PM | #26 |
chevy pride
|
i raced a fully built mmr 2011 mustang last weekend. in my cam , bolton car with about 300lb of weight reduction. he got me off the line by a car or 1 1/2 . by the out i started pulling on him and by the 1000' i was bumper to bumper and ended up beating him by 1/2 or more. it was a non timed event. i accually raced him 3 diff times and beat him every time but that race he had me off the line . the other 2 were close off the line and i won by 2-3 cars.
i raced a gt500 when i was full weight and about 15 less hp but on a 75 shot and it was close . i mean close. 100 shot i pulled him slowly
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
08-27-2013, 03:46 PM | #27 | |
Drives: '11 Cammed LS3, '14 Scion FRS Join Date: Dec 2011
Location: Dallas, TX
Posts: 758
|
Quote:
__________________
SOLD with a Z06 in the not too distant future: Cammed, boltons, axles, lowered, and more. | 476 WHP |
|
08-27-2013, 07:34 PM | #28 |
Drives: 2010 SS, 2000 Pontiac Formula Join Date: Mar 2013
Location: Missouri
Posts: 509
|
Some of the stories popping up in this thread LMAO
|
|
|
Thread Tools | |
|
|