11-22-2011, 08:18 PM | #1 |
The Mark of Excellence
Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,690
|
PAUL SS's ABM Journal
2010 1SS w/ RS, LS3, Aqua Blue Metallic, Gray Interior, Polished Wheels and Boston Accoustics 9 Speaker 245 Watt Audio.
Order NJRMGD, April 21, 2009. Delivered August 12, 2009 A list of all the current mods: Apex Skip Shift Eliminator - removed, CAGS tuned out Engine Cover Delete White Hood Spears with Red Accent Stripes Heritage Grille Blue Tint on Headlights. Parking Lights DRL and Reverse lights 2012 Camaro Heater Hoses by GM Rotated Fuel Rails with Corvette Fuel Line Intake Manifold cover Delete Red Powdered Coated Coil Brackets SS Button Head Machine Screws replacing hex head bolts LSR Billet Strut Retaining Washers Elite Engineering Catch Can with Braided Hoses and AN Fittings Cold Air Inductions Cold Air Intake Hurst Billet 2 Shifter Sparks Performance Billet SS replaces rear bowtie Custom Cold Air Scoop Washer Bottle Delete Separate Clutch Fluid Reservoir Window Tint 15% Pinstripes by Larry Hook Dyno Max Axle back Exhaust Metco Billet Tensioner Pulley. Lokar Dipstick and Tube. Upgraded Hurst shifter bushings. BMR front and rear 1 inch lowering springs. BMR front and rear adjustable sway bars and bushings. BMR front and rear sway bar end links. BMR rear sway bar end link reinforcement. BMR steering rack bushing. Clear Image headers. Stage 8 locking header bolts. Jet Hot 1300 silver ceramic header coating. Clear Image High Flow Cats and o2 Extensions. SS badge from stock grille attached to heritage grille. Polished factory valve covers. Polished factory thermostat housing JRE 4 wheel alignment. JRE SCT tune. Very first mod was the license plate. Ordered it before my order went to 2000. Then Came the Skip Shift Eliminator from Apex Motorsports. Removed, CAGS tuned out. Next, some minor engine bay changes. Factory fresh New Era Intake Pipe Kit looks better than the stock one. Then I got tired of the engine cover,so it had to go. The Bow Ties got some blue vynil. Then a Bow Tie Delete. And another change Hood Spears Time for some auto crossing The graphics were only on for one day Still looking for something better on the front, so it was time for a... Heritage grille, I need to get an "SS" on there. But that wasn't all There was also tint added to the lights from Rvinyl.
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein Last edited by PAUL SS; 03-19-2015 at 07:46 AM. |
12-03-2011, 08:44 AM | #2 |
The Mark of Excellence
Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,690
|
Hood spears get accents
1/8 pin stripes on top and 1/4 pinstripes along the bottom edde.
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein Last edited by PAUL SS; 12-03-2011 at 11:50 AM. |
12-03-2011, 08:49 AM | #3 |
The Mark of Excellence
Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,690
|
Time for an under hood cleanup.
So I took this all apart Swapped this out... for this, and this for this, and... got rid of the intake manifold cover and flipped the fuel rails 180 degrees. Took my coil brackets and... ...had them powder coated red. Now my engine bay looks like this.
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein Last edited by PAUL SS; 12-03-2011 at 11:56 AM. |
12-03-2011, 08:59 AM | #4 |
Most hated in NM....
Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011
Location: New Mexico
Posts: 2,904
|
engine bay is starting to look like a real muscle car now I dig it...
__________________
|
12-03-2011, 07:54 PM | #5 |
OFF THE CHAIN
|
Good job in the Engine Bay, i will keep checking back for more updates!
|
12-04-2011, 07:32 AM | #6 |
Jackson's COTW
Drives: 1968 Camaro & 2010 Camaro 2SS Join Date: Jul 2009
Location: Chalmers, Indiana
Posts: 1,740
|
Nice personal touch
Paul SS..Nice work. Glad to see your thread! I love the spears and especially after the pinstriping! Love the color...ABM--That's the one...keep up the good work...
__________________
|
12-04-2011, 07:37 AM | #7 |
Drives: 2010 Camaro 1LT/RS M6 Join Date: Nov 2007
Location: Fairhaven, MA
Posts: 5,885
|
Looks like you did a few things I didn't already know about...
__________________
Trifecta tune, Vararam Intake, VMAX throttle body and manifold insulator, RxPerformance Catch Can, , MRT v1.0 and Louvers, Barton shifter, BMR strut tower brace, RED dome light and Plasma LED DRL's, fieldgoal00's Halo 1 harness, hood spears/side stripes, rain guards, custom bowtie, Team LLT badges, headlight and foglight covers, taillight and side marker covers, backup light covers, WeatherTech floormats
|
12-04-2011, 02:48 PM | #8 | |||
The Mark of Excellence
Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,690
|
Quote:
Quote:
Quote:
Just trying to keep up with you Chuck.
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein |
|||
12-04-2011, 02:53 PM | #9 |
The Mark of Excellence
Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,690
|
In keeping with a developing theme of red, white, blue, black and gray/silver/chrome I also brought the rear bow tie up to date.
Maybe someday a nice "SS" will replace the bowtie, but this is it for now. Next, a better camera.
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein |
12-04-2011, 03:01 PM | #10 |
Most hated in NM....
Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011
Location: New Mexico
Posts: 2,904
|
that bowtie looks really good...
__________________
|
12-04-2011, 04:04 PM | #11 |
Jackson's COTW
Drives: 1968 Camaro & 2010 Camaro 2SS Join Date: Jul 2009
Location: Chalmers, Indiana
Posts: 1,740
|
I LIKE the bowtie....looks great on the ABM. Keep the pictures coming..
__________________
|
12-04-2011, 04:14 PM | #12 |
|
Hey Paul, I want to see a Supercharger in your next pic, get on that
__________________
Jannetty Racing JRE Street Package
|
12-04-2011, 05:49 PM | #13 | |
The Mark of Excellence
Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,690
|
Here you go Joe
Quote:
. . . . . . . . . . . . . . . . . . . . . . . .
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein |
|
12-05-2011, 01:11 PM | #14 |
|
I want to see that under your hood at Papa Johns next Summer
__________________
Jannetty Racing JRE Street Package
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PHOTOSHOP HELP!!! ABM with special rally's | TAG UR IT | Camaro Photoshops / Renderings Forum | 6 | 11-15-2009 07:50 PM |
ABM I don't get it | Bo Yo | 5th Gen Camaro SS LS LT General Discussions | 45 | 10-28-2009 12:55 PM |
ABM Ordering | mjlash22 | Camaro Price | Ordering | Tracking | Dealers Discussions | 18 | 10-27-2009 09:01 AM |
ABM not getting canceled in Canada? | iyam_lorne | 5th Gen Camaro SS LS LT General Discussions | 22 | 10-25-2009 05:57 PM |