01-06-2022, 03:38 PM | #1 |
Drives: 2018 Camaro ZL1 Join Date: Nov 2021
Location: St Clairsville, Ohio
Posts: 48
|
Any good performance shops between Columbus, Oh and Pittsburgh, Pa
I’ve got a 2018 ZL1 that I might be getting some engine work done on. Looking for a good shop within a couple hours from me. I’m in eastern Ohio, 2 hours due East of Columbus. Thanks
|
01-06-2022, 04:35 PM | #2 |
Drives: 2018 Camaro SS HW Edition, 2020 LT1 Join Date: Jan 2017
Location: Columbus Ohio
Posts: 109
|
I have a car over at MooreSpeed Performance. Really happy with their work. They are in Columbus.
__________________
1987 Camaro IROC-Z 6.0 LS 4L80
1988 Camaro IROC-Z TPI 5-Speed 1992 Camaro B4C 5.7 TPI 2018 Camaro SS Hot Wheels Edition #838 |
01-06-2022, 08:55 PM | #3 |
Drives: 2018 Camaro ZL1 Join Date: Nov 2021
Location: St Clairsville, Ohio
Posts: 48
|
|
01-07-2022, 05:56 AM | #4 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Carlyle Racing is in Ohio.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
01-08-2022, 04:21 PM | #5 |
Drives: 2018 Camaro SS HW Edition, 2020 LT1 Join Date: Jan 2017
Location: Columbus Ohio
Posts: 109
|
__________________
1987 Camaro IROC-Z 6.0 LS 4L80
1988 Camaro IROC-Z TPI 5-Speed 1992 Camaro B4C 5.7 TPI 2018 Camaro SS Hot Wheels Edition #838 |
01-08-2022, 06:10 PM | #6 |
Drives: 2018 Camaro ZL1 Join Date: Nov 2021
Location: St Clairsville, Ohio
Posts: 48
|
Thanks! There’s a shop close to me, that I didn’t know about. I’m going to check it out first.
|
01-18-2022, 06:13 PM | #7 |
Drives: 2012 ls3 Join Date: Feb 2014
Location: humble
Posts: 113
|
|
01-18-2022, 06:55 PM | #8 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,564
|
You're in a performance shop desert. Hang a left and head to either Lingenfelter or KaTech.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
01-19-2022, 01:18 PM | #9 |
Drives: 2018 Camaro ZL1 Join Date: Nov 2021
Location: St Clairsville, Ohio
Posts: 48
|
Shadyside Automotive, in Shadyside Ohio. It’s a small shop, been around for 2-3 years. I went there and talked to the owner. He seemed pretty knowledgeable. I’m doing some bolt-ons to my ZL1 this winter and he’s going to tune it. He has an in ground dyno. They have a page on Facebook.
|
|
|
Post Reply
|
|
|