05-13-2009, 11:12 PM | #1 |
ECU Pics?
Does anyone have any pics of the ECU in the SS? I know the V6 runs a Bosch ECU! Does the SS?
__________________
2005 Silverado VHO: Outlaw intake, Magnaflow exhaust, Belltech drop, 4.11 gears with Eaton LSD, Baer brakes 15" up front with 6 piston calipers, drum to disk 14" conversion for the rear, IForged 22"x10" 2 piece wheels, probably many more mods which I have missed... Soon to be 2010-2011 Camaro SS/RS This is if the truck is worth trading in or I get it paid off! |
|
05-13-2009, 11:16 PM | #2 |
Camaro➎ moderator
|
Don't know but Hennessey already has one for the SS.
Look at the Performance threads. It's under the Tunning section. |
05-13-2009, 11:31 PM | #3 |
I don't see any pics of the ECU itself. I see the Hennessey thread and pics but it doesn't show the ECU. It should be in the right front of the car if it's in the same place as the V6.
__________________
2005 Silverado VHO: Outlaw intake, Magnaflow exhaust, Belltech drop, 4.11 gears with Eaton LSD, Baer brakes 15" up front with 6 piston calipers, drum to disk 14" conversion for the rear, IForged 22"x10" 2 piece wheels, probably many more mods which I have missed... Soon to be 2010-2011 Camaro SS/RS This is if the truck is worth trading in or I get it paid off! |
|
05-13-2009, 11:33 PM | #4 | |
Camaro➎ moderator
|
Quote:
http://www.hennesseyperformancestore.com/poprup.html not in the Hennessey thread but in my performance threads |
|
05-13-2009, 11:40 PM | #5 |
Hmmm that must not be an actual photo. I did find this pic and it's not the same. Lower left with the fins and two connectors going into it.
__________________
2005 Silverado VHO: Outlaw intake, Magnaflow exhaust, Belltech drop, 4.11 gears with Eaton LSD, Baer brakes 15" up front with 6 piston calipers, drum to disk 14" conversion for the rear, IForged 22"x10" 2 piece wheels, probably many more mods which I have missed... Soon to be 2010-2011 Camaro SS/RS This is if the truck is worth trading in or I get it paid off! |
|
05-14-2009, 06:15 AM | #6 |
I hack cars.
Drives: Lots ;) Join Date: May 2009
Location: Metro Detroit
Posts: 519
|
I have pics but they are at work, SS runs a new hardware revision of the E38 with a 1263 part # and the V6 runs a bosch E69-4.
__________________
Chris White
Some uhhhh cars. |
05-14-2009, 06:20 AM | #7 |
Master of Medicine
Drives: 4th Gen Join Date: Oct 2008
Location: Kentucky
Posts: 784
|
Here is what I got, its not the best...from what I understand I believe its an E38 ecu...
__________________
2002 Camaro SS. 408 LS2. 500+RWHP/480RWTQ. Full UMI RR suspension. Koni/Strano. 295F/315R. 3500#(55/45)
|
05-14-2009, 11:13 AM | #8 |
I hack cars.
Drives: Lots ;) Join Date: May 2009
Location: Metro Detroit
Posts: 519
|
Here we go, this was a very early PS unit so it should have a production ECM in it
__________________
Chris White
Some uhhhh cars. |
05-14-2009, 02:55 PM | #9 |
Very cool thanks for the pics! I was just curious. I'm guessing the difference in the V6 is because of the direct injection for the injector drivers. (Dmax)
__________________
2005 Silverado VHO: Outlaw intake, Magnaflow exhaust, Belltech drop, 4.11 gears with Eaton LSD, Baer brakes 15" up front with 6 piston calipers, drum to disk 14" conversion for the rear, IForged 22"x10" 2 piece wheels, probably many more mods which I have missed... Soon to be 2010-2011 Camaro SS/RS This is if the truck is worth trading in or I get it paid off! |
|
|
|
|
|