05-11-2011, 05:58 PM | #1 |
Drives: '11 2SS/RS Vert, w/Hurst shifter Join Date: May 2011
Location: Peachtree City, GA
Posts: 23
|
convertible top alignment bushing pops out.
Anyone notice the bushing on the top of the windshield that the pin from the convertible top aligns to - popping out and retracting with the top? If un-noticed, when latching the top, the pin with the bushing does NOT seat back correctly, causing the top to not be latched on the passenger side. Noticed that bushing missing on another car in the showroom when I visited the dealer to get them to pre-order the assembly before I returned my 2011 car.
|
05-11-2011, 07:41 PM | #2 |
Drives: 68 SS clone,2011 2LT RS convertible Join Date: Jan 2009
Location: West Lafayette IN.
Posts: 45
|
One of mine popped out on day 2. I will wait until I get the first service to get it replaced.
|
05-11-2011, 08:31 PM | #3 |
Drives: '11 2SS/RS Vert, w/Hurst shifter Join Date: May 2011
Location: Peachtree City, GA
Posts: 23
|
My dealer's Parts guy indicated they can't just order the bushing, the assembly it plugs into has to be replaced, in the top of the windshield. No dealer is going to have that assembly in stock - the convertibles are too new.
|
05-11-2011, 08:49 PM | #4 |
Drives: Nissan, GMC Join Date: Feb 2011
Location: Tuscubia
Posts: 7
|
i test drove one and the same thing happened
|
05-17-2011, 02:00 PM | #5 |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
Have any of you actually gotten this issue resolved on your vehicles or are you waiting for parts or something else to take your vehicles in? Thank you all for your time.
Jeff Morris, Chevrolet Customer Service |
05-17-2011, 07:13 PM | #6 |
Drives: 2011 Camaro Convertible 2SS RS Join Date: Dec 2010
Location: Bergen County, New Jersey
Posts: 270
|
Spend about $50,000 on the car and it seems to be getting annoyance after annoyance. I'll bet many of us have gotten to be on first name with the service departments!
|
05-17-2011, 07:32 PM | #7 | |
"Catharine"
Drives: '11 2SS/RS LS-3 IOM/IO vert Join Date: Mar 2011
Location: Southern NH
Posts: 2,132
|
Quote:
Try the smaller Lexus convertible - when the top's down, reports say you can't put luggage in the trunk! Not to disparage others, just what I found when researching whether to choose that or the Camaro convertible. Wife and I want to be able to take at least some luggage on our weekend getaways, LoL!!
__________________
|
|
05-17-2011, 07:35 PM | #8 |
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,047
|
'some' luggage will fit in a Vert's trunk with the top down, but not very much unless it's very thin and can find under the window shade.
|
05-23-2011, 05:45 PM | #9 |
Drives: '11 2SS/RS Vert, w/Hurst shifter Join Date: May 2011
Location: Peachtree City, GA
Posts: 23
|
Part is still on order, have not heard back from the dealer on it's expected arrival date. I can say however, this is the only issue I've had so far, in 1020 miles....
|
05-26-2011, 01:30 PM | #10 |
Drives: 67 rs/ss 68z/28 69&2011 pace car Join Date: May 2011
Location: oklahoma
Posts: 9
|
After reading some posts on the problem i opened my top and removed the guides,then applied 3M panel bonding adhesive to the underside of guide . Put the top up,let set overnite should be good to go forever.
|
05-27-2011, 03:25 PM | #11 |
Drives: 2011 2LT/RS RJT Convertible Join Date: Mar 2011
Location: San Antonio
Posts: 58
|
Gotta Pic?
__________________
Born On 04/01/11 |
05-27-2011, 03:53 PM | #12 |
Drives: 67 rs/ss 68z/28 69&2011 pace car Join Date: May 2011
Location: oklahoma
Posts: 9
|
dont have pic already done ,but real simple just take a small blade screwdriver and pry the guide out,they will only go back in one way.Lay it upside down then just put a small amout of panel bonding all around the edge, snap it back in. Most all body shops have some panel bonding adhesive in there shop it takes a special gun to dispense it.
|
07-01-2011, 11:29 AM | #13 |
Drives: '11 2SS/RS Vert, w/Hurst shifter Join Date: May 2011
Location: Peachtree City, GA
Posts: 23
|
Went to dealer today for the A/C recall, and was advised that the whole assembly had arrived and was on the parts shelf. Dealer addressed the recall and replaced the assembly in less than 2 hours.
|
07-05-2011, 10:47 AM | #14 |
Drives: 14 Porsche Cayenne S 08 911 Turbo Join Date: Mar 2011
Location: Long Island, NY
Posts: 32
|
Mine Pops out every time I open the top. Passenger side only. Its a little black plastic piece that sits in the hole. Should be easy enough to make/order a replacement part. Will be addressing this when the car goes in for its first service. Only 600 miles and the A/C needs a recall, my Convertible tops has rub ,arks on it and I have a piece popping out every time I put the top down.
What should I expect at 6,000 miles?? |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Camaro Convertible First Drive Review by Jalopnik | nick at night | Camaro Convertible Forum | 18 | 01-31-2011 07:23 AM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
Official 2010 Camaro convertible concept pics!! | Tran | Camaro Photos | Spyshots | Video | Media Gallery | 107 | 07-21-2009 11:12 AM |
Toyota Prius Convertible | Muscle Master | General Automotive + Other Cars Discussion | 5 | 06-04-2008 11:50 AM |
2007 Ford Mustang Shelby GT500 Convertible | KILLER74Z28 | General Automotive + Other Cars Discussion | 10 | 04-11-2008 04:11 PM |