07-27-2013, 07:33 PM | #1 | |
Drives: 2013 2SS/RS VR 1LE Join Date: Jan 2013
Location: Prince George, B.C.
Posts: 486
|
Stainless Works Header install on 1LE
Installed my Stainless works headers and HF Cats today on my 2013 1LE. I have the NPP exhaust system so was curious as to what the difference would be. I set the camera up before the removal of the stock manifolds and took the shot so we had something to compare too. I left the camera in the same place and took the second shot with the new headers bolted up. Its is a 2013 Camaro 2SS/RS with 1LE and NPP. Under the hood I have only added a Rotofab air intake. The difference between the 2 videos is only the addition of the Stainless Works headers and HF Cats. I have a Mild to Wild controller so can manually open and close the four tips at the back of the car. For this video, all 4 tips were open. The atmosphere you see come out on the 2nd video is probably from the HF Cats as this was their first time running when I shot the vid. Last edited by 1LeSS; 07-27-2013 at 07:49 PM. Reason: diff video option. better |
|
07-27-2013, 07:37 PM | #2 |
2013 Camaro SS 1LE
|
Sweeeeeeeeeeeeeet.
|
07-27-2013, 08:50 PM | #3 |
Drives: 2013 2SS/RS VR 1LE Join Date: Jan 2013
Location: Prince George, B.C.
Posts: 486
|
Also, I did not throw any codes with this install. The Stainless Works headers come with the bungs for both o2 sensors and extensions so I reinstalled both front and rear o2's.
I expected with all that I have read that installing headers causes a code to be thrown and the only way around that is to tune the engine, thereby possibly voiding the warranty. Any input on this? or is there a guaranteed code in my future?? lol |
07-27-2013, 09:09 PM | #4 |
Drives: '13 AGM 2SS/RS 1LE, 1 of 139 Join Date: Apr 2011
Location: Broomfield, Colorado
Posts: 142
|
Sounds AWESOME !
I wonder if your warranty is safe with headers & high low cats..? Does anyone know the answer to the OP's question about throwing codes/CEL's..? Last edited by HighMtnSS; 07-27-2013 at 09:19 PM. |
07-27-2013, 09:11 PM | #5 | |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,687
|
Quote:
|
|
07-27-2013, 09:19 PM | #6 |
NEcamaro5
|
Um.
That is awesome!!!!!! I want this now and my wallet thanks you. Great! |
07-27-2013, 10:12 PM | #7 |
Drives: 2013 BRM 2SS/RS/1LE/NPP/NAV Join Date: Jun 2013
Location: Tonawanda, NY
Posts: 237
|
Ha I love the Timbits box! I worked at a Timmy hos about 7 years ago
|
07-27-2013, 10:16 PM | #8 |
|
You will get codes. O2 spacers for the rear sensors can help.
Most likely your car will run a little rich without a tune. But the car will run fine. I ran my last SS this way for a year+ and it ran 12.8s @113 without a tune. What I did was buy a cheap code reader/editor off Amazon and checked the codes and removed them from time to time. In the beginning I could go weeks without a CEL, but after last winter they came faster. BTW, let us know if there is any drone with the flaps open. Hopefully there will be none with the flaps enabled.
__________________
"Democracy Dies in Darkness" |
07-27-2013, 10:16 PM | #9 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Killer!! The code is just a light on the dash.... yours will happen eventually.... many run forever without a tune. Basically the car thinks the cats are bad.
Sent from my DROID RAZR using Tapatalk 2 |
07-27-2013, 10:29 PM | #10 |
Drives: 2013 2SS/RS VR 1LE Join Date: Jan 2013
Location: Prince George, B.C.
Posts: 486
|
Thanks all for your input. I'm running it in an autocross meet tomorrow so Ill let you know how it goes.
|
07-28-2013, 12:11 AM | #11 |
Drives: 2013 Camaro 2SS RS 1LE Join Date: Jul 2013
Location: New Zealand
Posts: 28
|
In our country we don't need to run cats as the emissions laws are very relaxed. Would you recommend getting rid of them all together?
|
07-28-2013, 12:24 AM | #12 |
Drives: 2013 2SS / RS / 1LE Join Date: Jul 2013
Location: Texas
Posts: 48
|
Sounds good man. What size headers are they? I just put 2" SW along with a lot of other stuff. If I was good with computers and phones I would post up a video but I'm not, but my brother did in another thread if you want to hear it just go to the Rivalry one.
__________________
ITS A WORK IN PROGRESS
SIMPLE QUICK RACING TUNED BY DANIEL TIMMONS @ SQR |
07-28-2013, 12:40 AM | #13 |
TRI COUNTY TAMPA
Drives: 2011 1SS/RS VR/BLK A6 Join Date: Jan 2011
Location: Trinity, Florida
Posts: 6,277
|
You will throw a code soon enough. No big deal. Either run that way or tune out the rear sensors. Of course you get more power with the tune but, probably lose the warranty.
Personally i'd rather have more fun. Pretty sure the only warranty i have left is maybe the radio. MAYBE lol. |
07-28-2013, 10:28 AM | #14 | |
Drives: 2013 2SS/RS VR 1LE Join Date: Jan 2013
Location: Prince George, B.C.
Posts: 486
|
Quote:
I don't know what other header kits are like but Ill give Stainless Works a thumbs up for a complete kit and easy install. Also forgot to give Chase at Apex a shout out for getting me hooked up with these puppies!! The engine feels like it has been released. A great mod!! |
|
|
|
|
|