Left tail light stays on after car is off.

[txkno]

Originally Posted by camguynj

It would give them one try if you really like the lights. I've never had a problem with their support. Try emailing them first. But get a backup eom set for insurance More than likely if you have a set that has a problem you're aways going to have problems. If that's the case get an excorsist or get rid of them.

I emailed them, well see what happens. Anyways, I found some locally, but they’re from a 2013 Camaro. Do you think they’ll fit mines 2012?

[camguynj]

Originally Posted by txkno

I emailed them, well see what happens. Anyways, I found some locally, but they’re from a 2013 Camaro. Do you think they’ll fit mines 2012?

Yes, 10-13s tailights are all the same except RS lights are darker.

[txkno]

Originally Posted by camguynj

Yes, 10-13s tailights are all the same except RS lights are darker.

Do you know which fuse controls the tail lights? The manual doesn’t day which one it is

[camguynj]

Originally Posted by txkno

Do you know which fuse controls the tail lights? The manual doesn’t day which one it is

No I don't. Why are you asking about the fuse?

[txkno]

Instead of unplugging the lights, I can just uplug the fuse so it doesn’t keep killing my battery, but idk which fuse it is.

[txkno]

Originally Posted by camguynj

You wouldn't want to unplug the fuse as then you wouldn't have any tailights. Just disconnect the driver outer Technostalgia connector (the one that comes from the light )

Unplug only when I’m not using the car. It’s my only solution for now until I order the sticks lights from directgm

[camguynj]

Originally Posted by txkno

Unplug only when I’m not using the car. It’s my only solution for now until I order the sticks lights from directgm

Just disconnect the driver side outer Technostalgia connector. Remove the lights access cover (step 1) which will give you access to the wiring, then disconnect the connector from the light shown here in step 5 (the one with the four colored wires) from the technostalgia harness connector it's attached to. Should take no more than 5-10 mins.

http://www.phastekperformance.com/v/...structions.pdf

[txkno]

Originally Posted by camguynj

Just disconnect the driver side outer Technostalgia connector. Remove the lights access cover (step 1) which will give you access to the wiring, then disconnect the connector from the light shown here in step 5 (the one with the four colored wires) from the technostalgia harness connector it's attached to. Should take no more than 5-10 mins.

http://www.phastekperformance.com/v/...structions.pdf

Alright boys, I got it all fix! She’s back in the road! After a two hour drive to an auto salvage who had OEM lights. They only sold me the plastic, I then bought the light at an auto parts store and connected them. I replaced all the lights to prevent this from happening in the future.

[chuckie669]

Congrats. Hopefully this is the last trouble we hear.

[txkno]

Originally Posted by chuckie669

Congrats. Hopefully this is the last trouble we hear.

Thanks bud. I have one more problem though.. I had this one for a while but It didn’t matter to me much since I could still drive the car like that, but why not ask. One of my halo rings from my head lights went out. How do I go about fixing this?

[chuckie669]

I'm assuming it's an oe rs headlight? Gotta ask. Unfortunately i don't believe the led is easily replaceable. You may find some useful info on page 2 or 3 here.
http://www.camaro5.com/forums/showthread.php?t=121399

[TheFlyingBananaSS]

If you switch the red and blue wires in this led set it corrects the problem. Just switch the wires on the side you had trouble with. It's the blast resistance that changes from the wire switching which corrects it.

[Angrybird 12]

Originally Posted by camguynj

Yes, 10-13s tailights are all the same except RS lights are darker.

Actually in 2012 and 13 they all got the darker tail light lens.

[camguynj]

Originally Posted by txkno

Alright boys, I got it all fix! She’s back in the road! After a two hour drive to an auto salvage who had OEM lights. They only sold me the plastic, I then bought the light at an auto parts store and connected them. I replaced all the lights to prevent this from happening in the future.

Glad for you! What did they charge you for the plastic lights?