under hood cosmetic mods - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

piepouli · 02-19-2013, 06:05 PM

very nice

ZED SLED · 02-20-2013, 06:53 AM

Quote:

Originally Posted by One-Bad-ZL1

Holy crap that looks awesome. Do it to mine!

Thanks Jay. The guy is really good. He did all the underhood on my SS and is local to me, but will do mail order stuff. Pretty much have to get in during the winter, though. Stays pretty booked up.
www.badbaran.com

Sharp-ZL1 · 02-20-2013, 07:48 AM

They all look really great I think we all had the same idea. I just have a couple more Items and then I will done with the engine bay.

ZED SLED · 02-21-2013, 12:30 PM

Does anyone know if there is a difference in the strut tower tops between the SS and ZL1? Looking to by a plain set of billet caps off ebay or somewhere that I can get airbrushed.
Thanks

Sharp-ZL1 · 02-21-2013, 12:40 PM

Here is mine. I just got the strut covers today that was the easiest install to date.
The only thing left is to get rid of the ugly intake hose. I would like carbon or hard hose to paint.

Yes I know we have enough ZL 1 Markings But they were the same price.

ZED SLED · 02-21-2013, 01:20 PM

Just want to make sure all caps fit on any Camaro. No diff for SS, ZL1, etc.? Didn't know ADM had CAI. Been holding out for CAI, Inc.
Looks awesome, BTW

Sharp-ZL1 · 02-21-2013, 01:29 PM

I think they will fit all not sure. I have the ADM for Since Aug. They are redueing the intake hose. Thanks.

Joebot8484 · 02-21-2013, 03:05 PM

Quote:

Originally Posted by One-Bad-ZL1

Nice clean install Joe!

Thank you!

One-Bad-ZL1 · 02-21-2013, 03:33 PM

Joe - I was so impressed, I went and placed my order for an RX catch in VR. Come on warm weather so I can get my mods going.

Deke736 · 02-22-2013, 02:59 PM

I just got a bunch of new painted goodies for engine bay, but I am waiting for warmer weather to install it all! The anticipation is killing me! After seeing all these awesome pics, I may just have to go install a few of the pieces!!!

Joebot8484 · 03-04-2013, 12:01 PM

Engine cover painted and installed.

One-Bad-ZL1 · 03-04-2013, 03:48 PM

Quote:

Originally Posted by Joebot8484

Engine cover painted and installed.

Joe looks great man.

Do mine!

adamDallas · 03-05-2013, 09:49 AM

I try to get installed photos, but sometimes i never hear back.
Thought these might give you guys some cool outside-the-box ideas.

1968SS/RS · 03-05-2013, 11:48 AM

Quote:

Originally Posted by adamDallas

I try to get installed photos, but sometimes i never hear back.
Thought these might give you guys some cool outside-the-box ideas.

Nice! is this your airbrush work? I'm big into the skulls

02-20-2013, 07:48 AM	#45
Sharp-ZL1 MSG,Retired US. ARMY Drives: 2012 ZL1, 11 XC 90, 15 BMW 328i SW Join Date: Feb 2012 Location: Germany Posts: 233 View My Garage	They all look really great I think we all had the same idea. I just have a couple more Items and then I will done with the engine bay. __________________ My build site: http://www.camaro5.com/forums/showthread.php?t=276256 2012 Camaro ZL1 #151, GCN, Dyno results 701 RWHP Mods; 2.55 Pulley, CAI, LG Cam Package Ti Springs and 9G2X Cam, RX Can, KDI Heat exchanger, Hurst shifter, Orcale Ghosted marker lights, Kooks Long tube headers with Cats deletes and Tuned by Kraftwerks, Pedders 1 inch lowering Springs, Front and rear sway bars, Rear cradle bushing, BMR Trailing arms and toe rods.

02-21-2013, 12:30 PM	#46
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,477 View My Garage	Does anyone know if there is a difference in the strut tower tops between the SS and ZL1? Looking to by a plain set of billet caps off ebay or somewhere that I can get airbrushed. Thanks __________________

02-21-2013, 12:40 PM	#47
Sharp-ZL1 MSG,Retired US. ARMY Drives: 2012 ZL1, 11 XC 90, 15 BMW 328i SW Join Date: Feb 2012 Location: Germany Posts: 233 View My Garage	Here is mine. I just got the strut covers today that was the easiest install to date. The only thing left is to get rid of the ugly intake hose. I would like carbon or hard hose to paint. Yes I know we have enough ZL 1 Markings But they were the same price. Attached Images __________________ My build site: http://www.camaro5.com/forums/showthread.php?t=276256 2012 Camaro ZL1 #151, GCN, Dyno results 701 RWHP Mods; 2.55 Pulley, CAI, LG Cam Package Ti Springs and 9G2X Cam, RX Can, KDI Heat exchanger, Hurst shifter, Orcale Ghosted marker lights, Kooks Long tube headers with Cats deletes and Tuned by Kraftwerks, Pedders 1 inch lowering Springs, Front and rear sway bars, Rear cradle bushing, BMR Trailing arms and toe rods.

02-21-2013, 01:20 PM	#48
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,477 View My Garage	Just want to make sure all caps fit on any Camaro. No diff for SS, ZL1, etc.? Didn't know ADM had CAI. Been holding out for CAI, Inc. Looks awesome, BTW __________________

02-21-2013, 01:29 PM	#49
Sharp-ZL1 MSG,Retired US. ARMY Drives: 2012 ZL1, 11 XC 90, 15 BMW 328i SW Join Date: Feb 2012 Location: Germany Posts: 233 View My Garage	I think they will fit all not sure. I have the ADM for Since Aug. They are redueing the intake hose. Thanks. __________________ My build site: http://www.camaro5.com/forums/showthread.php?t=276256 2012 Camaro ZL1 #151, GCN, Dyno results 701 RWHP Mods; 2.55 Pulley, CAI, LG Cam Package Ti Springs and 9G2X Cam, RX Can, KDI Heat exchanger, Hurst shifter, Orcale Ghosted marker lights, Kooks Long tube headers with Cats deletes and Tuned by Kraftwerks, Pedders 1 inch lowering Springs, Front and rear sway bars, Rear cradle bushing, BMR Trailing arms and toe rods.

02-19-2013, 06:05 PM	#43
piepouli Drives: 04 gmc/ zl1 Join Date: Nov 2011 Location: ontario Posts: 198	very nice

02-21-2013, 03:33 PM	#51
One-Bad-ZL1 So easy to love Camaros Drives: 2013 ZL1 VR #3457 Join Date: Feb 2012 Location: Marlborough, CT Posts: 3,768 View My Garage	Joe - I was so impressed, I went and placed my order for an RX catch in VR. Come on warm weather so I can get my mods going. __________________

02-22-2013, 02:59 PM	#52
Deke736 COTW 12/3/12 Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011 Location: Glen Carbon, IL Posts: 3,279	I just got a bunch of new painted goodies for engine bay, but I am waiting for warmer weather to install it all! The anticipation is killing me! After seeing all these awesome pics, I may just have to go install a few of the pieces!!! __________________

03-04-2013, 12:01 PM	#53
Joebot8484 ZL1 # 1307 Drives: 2012 Camaro ZL1, 2008 Hummzilla H3 Join Date: Nov 2010 Location: Central New York Posts: 1,911 View My Garage	Engine cover painted and installed. __________________ Click on my signature for my build thread

03-05-2013, 09:49 AM	#55
adamDallas Blast Airbush Drives: Sts-V Join Date: Mar 2010 Location: Houston Posts: 92 View My Garage	I try to get installed photos, but sometimes i never hear back. Thought these might give you guys some cool outside-the-box ideas. __________________ Trans Am cadi cts C6 Vette f250 powerstroke diesel 09 Silverado -sold-