05-21-2013, 02:35 PM | #1 |
Drives: 2012 LT Camaro Join Date: Jul 2012
Location: New York
Posts: 134
|
Oracle CCFL Afterburners Help
I bought and installed some CCFL afterburners preassembled from Oracle / AAC. They worked for 2 days so I know the install worked. When I turned the car on today none of the 4 afterburners worked.
When I opened the rear again all the wiring looked in place. Any ideas what would make all 4 afterburners stop working (as opposed to only 1 side)? |
05-21-2013, 02:42 PM | #2 |
|
did you wire them into your bulb wires or seperate? and do your bulbs work? thats really weird to think all 4 went out, i can only think a fuse is blown, or faulty wiring... no way all 4 would go out for another reason.
|
05-21-2013, 02:44 PM | #3 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
This is what I'm thinking yea.
|
05-21-2013, 02:55 PM | #4 | |
Drives: 2012 LT Camaro Join Date: Jul 2012
Location: New York
Posts: 134
|
Quote:
We snipped the bulbs so the parking lights are disabled but pressing on the brakes the bulbs do in fact come on so they work fine. |
|
05-21-2013, 03:20 PM | #5 |
|
do you have the dual intensity circuit? or do you just have it positive and negative?
From the afterburners you should have a black and a red wire correct? black into black on the bulb wires, and where did you put your positive wire? to the park lights or the power wire? Do they come on at all? if your bulbs are on, if you use your turn signal, if you use your brake light, is there any activity from them period? fastest way to tell if its a wiring problem would be to take one out, pop your hood, open your fuse box cover, touch the positive wire to the red power cable, and then the black negative wire to a bolt on the fender.. if it lights up, somthing is going on with the wires in the back. |
05-21-2013, 04:11 PM | #6 | |
Drives: 2012 LT Camaro Join Date: Jul 2012
Location: New York
Posts: 134
|
Quote:
I honestly don't know if its dual or pos/neg. i just used what was in the aac kit. The inverter does have a red and black wire though. Wired it like the instructions said, black to black and red to brown(parking lights). I'll try checking fuses next, thanks for the tip...might have to bring it to an oracle dealer Last edited by Camaro Ice; 05-21-2013 at 07:09 PM. |
|
05-21-2013, 06:47 PM | #7 |
|
Honestly i have not used nor seen the inverter, so mabey the inverters are bad? mine i literally wired myself.. and you said you wired it to the park lights? il have to go out and look at mine to remind myself what is what.
|
05-21-2013, 06:50 PM | #8 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Quote:
|
05-21-2013, 06:54 PM | #9 | |
Drives: 2012 LT Camaro Join Date: Jul 2012
Location: New York
Posts: 134
|
Quote:
^And this inverter is the Oracle inverter that came with the kit, says ORACLE 10000V or something on the other side. I honestly don't think new inverters that AAC sent could be bad so I ruled that out. |
|
05-21-2013, 06:57 PM | #10 | |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Quote:
|
|
05-21-2013, 07:05 PM | #11 | |
Drives: 2012 LT Camaro Join Date: Jul 2012
Location: New York
Posts: 134
|
Quote:
Am not at my car right now but that would mean it is not the black oem wire, but the wire that is part of the inverter. Last edited by Camaro Ice; 05-21-2013 at 07:23 PM. |
|
05-22-2013, 11:50 AM | #12 |
Drives: 2012 LT Camaro Join Date: Jul 2012
Location: New York
Posts: 134
|
Went to a professional oracle dealer and they found out that whoever baked/installed the afterburners really messed up.
The afterburners were cracked and broken after 2 days of use. Just letting you guys know, thank you for the help. |
05-22-2013, 12:41 PM | #13 |
Camaro5line
Drives: 2012 Synergy Series 2SS/RS Join Date: Aug 2012
Location: Harlingen, TX
Posts: 165
|
That does not make any sense. What I am getting at is that the afterburner themselves were defective. For one you do not bake the tail lights you cut them open. Secondly, even if you were to bake the lights the afterburners would not be in them during that process. I do not see how you can mess up the afterburners during the install if you follow the instructions from AAC. Then again, what do I know.
|
05-22-2013, 12:55 PM | #14 | |
Drives: 2012 LT Camaro Join Date: Jul 2012
Location: New York
Posts: 134
|
Quote:
|
|
|
|
|
|