01-21-2015, 03:54 PM | #1 |
Drives: 2013 ZL1 Join Date: Dec 2014
Location: Brisbane, Australia
Posts: 19
|
Need AU maps for MyLink navigation
I know the AU forum does not get a lot of traffic so this is a long shot but I will give it a go anyway.
I have a 2013 ZL1 with MyLink navigation. I got the car converted at SCD in Brisbane and they do not have AU maps for MyLink Navigation. Is there someone in Australia, preferably Qld, that can update MyLink Nav with Australia maps? I am using an iPhone for Nav at the moment, and I am sure it is more user friendly and accurate than most factory navigation systems, but I would like MyLink Nav working in my car for the completeness factor. Cheers, Terry |
01-22-2015, 04:25 AM | #2 | |
Quote:
Hi there 57tking I would try your local friendly Holden dealer, the new VF Commodore has MyLink so they must have the software to update the Australian maps. This would normally be done with a disc in the CD player or with there Tech3 diagnostic computer, I had to get my TPMS sensors programmed when I fitted a new wheel and tyre package I purchased from the States, my local dealer reprogrammed the TPMS in a couple of minutes. Cheers Stubbsy |
||
01-22-2015, 01:45 PM | #3 |
Drives: 2013 ZL1 Join Date: Dec 2014
Location: Brisbane, Australia
Posts: 19
|
Thanks for the quick reply mate, I will give Holden a go and see if they can sort me out.
Cheers, Terry |
04-14-2015, 09:17 PM | #4 |
Drives: 20014 Camaro 1LE Join Date: Mar 2015
Location: Australia
Posts: 5
|
Hey 57tking,
Did you manage to get MyLink update with the AU maps? I have been trying to get this done with out any success. Thanks |
|
|
Thread Tools | |
|
|