Pyr0b0y's SS Build Thread [COTW 5/23/11] - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

pyr0b0y · 03-08-2011, 08:03 PM

The code has to do with my O2 sensors, have to get it tuned out. Hopefully Luke gets my mufflers in tomorrow and I can drop it off for exhaust, front sway bar, and bushings kit.

Silver2SSRS6spd · 03-08-2011, 08:43 PM

http://www.camaro5.com/forums/showth...119028&page=20

Read the thread above, it's long but talks all about the OD cog and all the issues with the fuel rail clearance.

pyr0b0y · 03-09-2011, 12:20 AM

just read threw it, well see what happens when the new fuel rail goes on

pyr0b0y · 03-14-2011, 06:34 PM

Got my new fuel rails in today, will post some pics later tonight. Thanks to Jon. Took only 3 days to get here; couldnt be happier with their excellent customer service! Trying to get it installed this week. Also buying a dual fuel pump to be safe.

Also, can anyone make some suggestions on upgrading my fuel system, costs? Dual fuel pump setup and possibly injectors?

Silver2SSRS6spd · 03-14-2011, 08:16 PM

Quote:

Originally Posted by pyr0b0y

Got my new fuel rails in today, will post some pics later tonight. Thanks to Jon. Took only 3 days to get here; couldnt be happier with their excellent customer service! Trying to get it installed this week. Also buying a dual fuel pump to be safe.

Also, can anyone make some suggestions on upgrading my fuel system, costs? Dual fuel pump setup and possibly injectors?

Hope someone chimes in, there are lots choices. Meth, KB BAP, pump voltage booster and the dual pumps to name a few. I'm leaning towards the voltage booster since I'm sticking with low boost. Did you get your front sway installed. Did you get your cog drive yet?

cyberLS · 03-20-2011, 11:12 PM

Wish i could have saw it at MSM

pyr0b0y · 03-22-2011, 11:44 AM

Just ordered a KB BAP for my setup that arrives tomorrow. My Magnaflow mufflers are going on tomorrow with my modified fuel rail and OD cog drive! Should be 600+hp this weekend.

*Mindz* · 03-22-2011, 11:47 AM

Right in time for the fest! Congrats.

pyr0b0y · 03-22-2011, 02:31 PM

pics of the 2001 Z06 Vette I picked up last week. Its going to be my daily driver so i can keep the miles off of my camaro.

Silver2SSRS6spd · 03-22-2011, 02:50 PM

Quote:

Originally Posted by pyr0b0y

pics of the 2001 Z06 Vette I picked up last week. Its going to be my daily driver so i can keep the miles off of my camaro.

Sweet looking car!

pyr0b0y · 03-24-2011, 06:53 PM

cog drive and fuel rail went on today. Luke's installing the boost a pump right now. I'm gunna head down after work and check everything out. Unfortunately I need to get different mufflers again! *SURPRISE* guess i'll appreciate the sound more when i get them. i'll try and snap some pics tonight and get them posted up.

Also, since i'm going for the overdrive cog, can anyone recommend a LARGER pulley size in the front to cutdown on my boost? I currently have a stock maggie pulley.

pyr0b0y · 03-25-2011, 05:25 PM

Got some pics last night before i took my car home, but it was too dark so i'll have to take more tomorrow. Luke did an EXCELLENT job installing the KB BAP. he took the time to route it from the trunk into the engine bay so you cant see any wiring. The controller fits inside the golve box and it looks awesome! OD cog went on as well (still need to get it tuned). Hopefully its louder than it is now; theres a whine, but i wish it was louder. Guess i'll find out after the tune and go from there.

*Mindz* · 03-25-2011, 05:35 PM

What did you do about your pulley situation?

pyr0b0y · 03-25-2011, 05:42 PM

Im guessing im running around 9-10psi. Luke said the cam cuts down on the boost a little. Gotta get it tuned by Nick then figure out if i need a bigger pulley on the front. I'm not really going abouve 3.5k rpms until it goes in for a tune!

View Poll Results: T Tops or Carbon Fiber?
T Tops	14	73.68%
Carbon Fiber Conversion (Fenders, doors, etc)	5	26.32%
Voters: 19. You may not vote on this poll

03-08-2011, 08:03 PM	#113
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	The code has to do with my O2 sensors, have to get it tuned out. Hopefully Luke gets my mufflers in tomorrow and I can drop it off for exhaust, front sway bar, and bushings kit. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-08-2011, 08:43 PM	#114
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	http://www.camaro5.com/forums/showth...119028&page=20 Read the thread above, it's long but talks all about the OD cog and all the issues with the fuel rail clearance. __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

03-09-2011, 12:20 AM	#115
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	just read threw it, well see what happens when the new fuel rail goes on __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-14-2011, 06:34 PM	#116
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Got my new fuel rails in today, will post some pics later tonight. Thanks to Jon. Took only 3 days to get here; couldnt be happier with their excellent customer service! Trying to get it installed this week. Also buying a dual fuel pump to be safe. Also, can anyone make some suggestions on upgrading my fuel system, costs? Dual fuel pump setup and possibly injectors? __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-20-2011, 11:12 PM	#118
cyberLS Drives: 2010 Cyber Grey LS Join Date: Mar 2010 Location: Santa Clara Posts: 2,224 View My Garage	Wish i could have saw it at MSM

03-22-2011, 11:44 AM	#119
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Just ordered a KB BAP for my setup that arrives tomorrow. My Magnaflow mufflers are going on tomorrow with my modified fuel rail and OD cog drive! Should be 600+hp this weekend. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-22-2011, 11:47 AM	#120
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	Right in time for the fest! Congrats. __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

03-22-2011, 02:31 PM	#121
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	pics of the 2001 Z06 Vette I picked up last week. Its going to be my daily driver so i can keep the miles off of my camaro. Attached Images __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-24-2011, 06:53 PM	#123
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	cog drive and fuel rail went on today. Luke's installing the boost a pump right now. I'm gunna head down after work and check everything out. Unfortunately I need to get different mufflers again! SURPRISE guess i'll appreciate the sound more when i get them. i'll try and snap some pics tonight and get them posted up. Also, since i'm going for the overdrive cog, can anyone recommend a LARGER pulley size in the front to cutdown on my boost? I currently have a stock maggie pulley. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-25-2011, 05:25 PM	#124
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Got some pics last night before i took my car home, but it was too dark so i'll have to take more tomorrow. Luke did an EXCELLENT job installing the KB BAP. he took the time to route it from the trunk into the engine bay so you cant see any wiring. The controller fits inside the golve box and it looks awesome! OD cog went on as well (still need to get it tuned). Hopefully its louder than it is now; theres a whine, but i wish it was louder. Guess i'll find out after the tune and go from there. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

03-25-2011, 05:35 PM	#125
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	What did you do about your pulley situation? __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

03-25-2011, 05:42 PM	#126
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Im guessing im running around 9-10psi. Luke said the cam cuts down on the boost a little. Gotta get it tuned by Nick then figure out if i need a bigger pulley on the front. I'm not really going abouve 3.5k rpms until it goes in for a tune! __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3rd Gen Camaro Street Stock build thread (dialup beware)	zlathim	3rd Generation Camaros	9	12-06-2018 10:30 AM
Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12]	GTAHVIT	Member Car Journals	5217	06-27-2016 08:14 AM
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-04-2010 11:49 PM
Anyone in St. Louis want a black SS March build Camaro	Sean_W	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	03-08-2009 01:31 PM