05-11-2017, 11:04 AM | #1 |
BUMBL Z
|
Looking for a few things
I installed a vararam on the car a while back and will be taking it off. For the life of me i have no clue where the brackets and bolts went *for the radiator*. I found the bracket part number online but I can't find the bolt number, as well as that piece of weather strip that goes right there above the radiator (the one that has to be modified for the intake to fit). Any help?
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq Last edited by spadz93; 05-15-2017 at 06:50 AM. |
05-11-2017, 07:22 PM | #2 | |
Drives: 2013 ZL1 Join Date: Nov 2015
Location: Texas
Posts: 475
|
Quote:
Did you look under the bed in the spare room? |
|
05-11-2017, 09:23 PM | #3 | |
BUMBL Z
|
Quote:
Sent from my Pixel XL using Tapatalk
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
05-11-2017, 10:38 PM | #4 |
Drives: 2010 SS Join Date: Feb 2017
Location: St Louis Metro East
Posts: 24
|
I was missing a bracket also! Mine has a bolt on one bracket and stud on the other. Took the bolt to Lowe's and matched up a nut. Got the bracket on EBay. I would think a sheet metal bolt that is pretty close in size will work fine. If you can't find the part # for weatherstripping, check an auto parts store for weatherstripping that you could stick on and look stock.
|
05-12-2017, 12:26 PM | #5 | |
BUMBL Z
|
Quote:
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
05-12-2017, 05:30 PM | #6 | |
|
Quote:
Oh Oh you're one of those fun people that starts a conversation in the middle aren't you? Are you talking about the stock air intake? WTF
__________________
Mods, K&N CAI ,VTC , GM Perf Axleback Exhaust, Elite Eng CC and CSS, GM Strut Tower Brace,Carbon Fiber Anvil Spoiler,ASC T5 Splitter,Gen5diy Foglight kit.
|
|
05-15-2017, 06:50 AM | #7 |
BUMBL Z
|
Edited, my bad, was probably a rough day at work
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
Thread Tools | |
|
|