Cut low-intensity brake lights to make Afterburners stand out!

[BudMC77]

Gotcha..Thanks!

[The Stig]

Originally Posted by BudMC77

So correct me if im wrong but doing this, the tailights will not light at all until you hit the brake, correct? Even if the park lights are on?

Yep you got it.

[ihaveacamaro]

Originally Posted by BudMC77

Gotcha..Thanks!

Made a picture for you

[11 Camaro IBM]

Looks good it's honestly easier to just use 3156 bulbs saves you the cutting and chances of burning out your bulbs

[BudMC77]

Originally Posted by ihaveacamaro

5) Two of the wires are facing the outside, while two wires are facing the inside. With your finger pry up the two that are facing INSIDE and cut them.

Originally Posted by stieger

You cut one of the outer prongs off of the light bulb takes 5 minutes. AAC includes instructions on how to do it with their afterburners.

Wait, so is it the inside or outside wire? You both side differently

[ihaveacamaro]

Originally Posted by BudMC77

Wait, so is it the inside or outside wire? You both side differently

It's the inside ones, I promise you

[ihaveacamaro]

Originally Posted by 11 Camaro IBM

Looks good it's honestly easier to just use 3156 bulbs saves you the cutting and chances of burning out your bulbs

yeah easier, but you won't have to buy anything in this case.

If you burn out your bulb (which shouldn't happen), then might as well buy a 3156

[Shuffler]

AAC installed mine and cut the prong.....

This is in daylight

[=Stephens=]

Oh yah I did that right away.

[ihaveacamaro]

Originally Posted by zkdreads

NICE. ill have to see this in person next week too

Originally Posted by Sickwitit

Looks real clean...I like it...congrat's on the mod sucess.

Originally Posted by midnighter

I like how those look.

Thanks

[The_cartoonist_88]

so this is with just the factory lights and no other mods?

[The Stig]

Originally Posted by The_cartoonist_88

so this is with just the factory lights and no other mods?

No, you need to install the AAC. Afterburner halos.

[hapisok]

yeah, so how bright is it on a bright day? i'd be worried about "improper or altered equipment" tickets along with some ass clown claiming they couldn't see the brake lights come on. looks sweet at night...but daylight, it seems insufficient. looks good though

[ihaveacamaro]

Originally Posted by hapisok

yeah, so how bright is it on a bright day? i'd be worried about "improper or altered equipment" tickets along with some ass clown claiming they couldn't see the brake lights come on. looks sweet at night...but daylight, it seems insufficient. looks good though

Well in a bright day, your parking lights wouldn't normally be on, so it's the same situation before and after Go take a look at your rear lamps during the day, nothing should be on.

As for braking, you have to realize the braking is EXACTLY the same as before. Braking is high intensity light, and nothing has changed to the high intensity light. It will come on as soon as the brake is hit, with the exact same light output.