03-06-2014, 10:51 AM | #85 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
I can and will later in the day. Right now I have to finish a project in the shop before the bus runs me over.
|
03-06-2014, 08:17 PM | #86 | |
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
Quote:
I just climbed under my 1LE and my subframe bushings are not green. I can see a hard cream/white outer bushing with the rubber insert. -Matt
__________________
|
|
03-06-2014, 08:24 PM | #87 |
BeckyD Rocks :-)
|
I believe that picture is the 1LE Track Pack kit available through Chevrolet Performance Parts.
__________________
2015 CRT 1SS/1LE RS/Recaro's/NPP/Nav/Rear vision pkg./BA speaker upgrade. Stage 3 BMR cam, ARH 1 7/8 headers, CAI,
BMR 1.25 drop springs, JPSS Billet Bushings, Peddars Cradle Bushings...460 whp...so far....SOLD, but not forgotten! |
03-06-2014, 08:36 PM | #88 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
03-06-2014, 08:38 PM | #89 | ||
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Quote:
Quote:
With the increased front grip by comparison the rear has less grip resulting in a bit more rotation |
||
03-06-2014, 09:18 PM | #90 | |
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
Quote:
My concern is picking up the inside wheel on corner exit...I already have an issue on certain turns on corner exist (Grattan turn 7, right hander just before the carousel) with the inside wheel breaking loose and spinning until I lift. I know this can be fixed with a Trutrac or Torsen, but I don't want to exaggerate the issue. -Matt
__________________
|
|
03-06-2014, 09:27 PM | #91 | |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Quote:
|
|
03-06-2014, 09:35 PM | #92 |
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
Front and rear bars are stock 1LE......
Conversation has continued in another thread regarding 1LE suspension: http://www.camaro5.com/forums/newrep...eply&p=7475235 Matt
__________________
|
06-10-2014, 01:19 PM | #93 |
Drives: 2020 ZL1 1LE Join Date: Sep 2012
Location: Austin, Texas
Posts: 1,337
|
On my 2013 SS I could just make out the part number on the front cradle bushing. It was the same as the part #20941932 I have seen listed on this site for the 1LE cradle bushings. Maybe this is not the 1LE part #. Anyone else with a '13 wants to check? It is stamped in the black rubber at the top of the bushing.
__________________
2020 ZL1 1LE [Moroso SC Expansion Tank, otherwise stock]
|
07-26-2016, 11:29 PM | #94 |
Drives: 2014 SS L99 Join Date: Dec 2014
Location: Lake Charles
Posts: 59
|
In the picture of the kit what are the smaller 2 rods In the middle? I bought a kit from a guy and he didn't include those. I need to figure out what they are and maybe a part number if anyone knows them. Also need part numbers for those green bushings, they were also not included.
|
|
|
|
|