msd window switch connection question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ksspeed · 08-08-2013, 11:33 AM

Need help,on which cylinder and what wire (color) does the signal wire forthe window switch connect to?

ksspeed · 08-08-2013, 07:27 PM

... So here is the answer! I spoke with someone on the forum, unsure if he wanted his name mentioned, but i owe him a big thank you. For anyone installing an MSD 8969 window switch, or equivalent, the switch should be set for "1" cylinder. The signal wire will connect to the third wire from the left (on a LFX at least) This is a different color wire on each cylinder harness, and the only wire on each harness that changes color. I spliced into a couple of different coil wires (all on the third wire from left) and had proper signal.

08-08-2013, 11:33 AM	#1
ksspeed Drives: 2013, Camaro 2LS (BRM) Join Date: Jun 2013 Location: Eudora, Ks. 66025 Posts: 56	msd window switch connection question Need help,on which cylinder and what wire (color) does the signal wire forthe window switch connect to?

08-08-2013, 07:27 PM	#2
ksspeed Drives: 2013, Camaro 2LS (BRM) Join Date: Jun 2013 Location: Eudora, Ks. 66025 Posts: 56	... So here is the answer! I spoke with someone on the forum, unsure if he wanted his name mentioned, but i owe him a big thank you. For anyone installing an MSD 8969 window switch, or equivalent, the switch should be set for "1" cylinder. The signal wire will connect to the third wire from the left (on a LFX at least) This is a different color wire on each cylinder harness, and the only wire on each harness that changes color. I spliced into a couple of different coil wires (all on the third wire from left) and had proper signal.