About to pull the trigger on JRE Brawler kit!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Turbo99 · 03-23-2011, 10:34 AM

I am a few days away from ordering a JRE Street Brawler kit along with the blower cam and cog drive!!! I am thinking of not doing the pulley upgrade just to help the stock bottom end hold a little longer but haven't made my mind up of that yet. I also already ordered a LPE dual fuel pump so I should be set. I got some 305/35R20 Nitto 555Rs for the back too.

I know I will need a clutch and axles soon but that has to wait until they break, I am also looking at the RPM bolt in roll cage since I am thinking I will be around the mid to low 11's.

8cd03gro · 03-23-2011, 11:12 AM

Quote:

Originally Posted by Turbo99

I am a few days away from ordering a JRE Street Brawler kit along with the blower cam and cog drive!!! I am thinking of not doing the pulley upgrade just to help the stock bottom end hold a little longer but haven't made my mind up of that yet. I also already ordered a LPE dual fuel pump so I should be set. I got some 305/35R20 Nitto 555Rs for the back too.

I know I will need a clutch and axles soon but that has to wait until they break, I am also looking at the RPM bolt in roll cage since I am thinking I will be around the mid to low 11's.

Congrats, you're going to have a ton of fun. If you're worried about longevity be sure to get a good dyno or road tune. I'm sure the canned tune is fine, but you will make more, safer power with a good tune. Be sure to take some videos.

Turbo99 · 03-23-2011, 11:24 AM

Oh it will be tweaked by Ted for sure, either by data logging and email tweaks or I am thinking of seeing if he wants a flight to Florida for a live tune session.

GMRULZ · 03-23-2011, 11:50 AM

Oh yeah, thats what I`m talking about!!! Yep Ted can get that puppy perfect, its his kit so you know he knows every fine minutia to dial her in perfect!

Turbo99 · 03-23-2011, 12:04 PM

I am hoping around 600rwhp and some low 11's with the manual tranny and some extreme fun on the street!

Jchaluja · 03-23-2011, 03:31 PM

sweet build....I'll be looking for your car at Gainesville track!! (once I install my cage)....I'll get kicked out as of now....

Turbo99 · 03-23-2011, 03:43 PM

Yeah I am worried about getting booted too, that is why I was thinking of not doing the pulley upgrade, I think I want to wait a little while to cage it but I also like the safety factor of the cage.

Look forward to seeing you at the track.

1 bad azz ls3 · 03-23-2011, 03:58 PM

i just finished putting in a vortech ysi with a cog drive. i also have a jre blower cam and a Adm fuel system with meth.. all i can say is it is a lot of power. and ted is second to none when it comes to tuning.

Turbo99 · 03-25-2011, 02:02 PM

Well I just did it!!! Ordered the TVS2300,and lope idle blower cam kit, LPE dual pump,catch can and COG DRIVE!!!!

Can't wait to get it and get it all installed!!!! Also got some 305/35R20 Nitto 555R's

JANNETTYRACING · 03-25-2011, 02:33 PM

Quote:

Originally Posted by Turbo99

Well I just did it!!! Ordered the TVS2300,and lope idle blower cam kit, LPE dual pump,catch can and COG DRIVE!!!!

Can't wait to get it and get it all installed!!!! Also got some 305/35R20 Nitto 555R's

Thanks for the Order, already gathering and shipping parts.

Ted.

2010 SSRS · 03-25-2011, 02:44 PM

Quote:

Originally Posted by Turbo99

Well I just did it!!! Ordered the TVS2300,and lope idle blower cam kit, LPE dual pump,catch can and COG DRIVE!!!!

Can't wait to get it and get it all installed!!!! Also got some 305/35R20 Nitto 555R's

Notneb · 03-25-2011, 03:06 PM

Don't forget to post video's of the end result!!! Some of us have to survive of the vids of others until we get enough money saved up :p *5 More Months!!!!*

Supercharged SS · 03-25-2011, 03:17 PM

Quote:

Originally Posted by Turbo99

Yeah I am worried about getting booted too, that is why I was thinking of not doing the pulley upgrade, I think I want to wait a little while to cage it but I also like the safety factor of the cage.

Look forward to seeing you at the track.

All the cool kids have a cage!

GMRULZ · 03-25-2011, 03:43 PM

Quote:

Originally Posted by Supercharged SS

All the cool kids have a cage!

:(

03-23-2011, 10:34 AM	#1
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	EDIT: Pulled the trigger on JRE Brawler kit and cam!! I am a few days away from ordering a JRE Street Brawler kit along with the blower cam and cog drive!!! I am thinking of not doing the pulley upgrade just to help the stock bottom end hold a little longer but haven't made my mind up of that yet. I also already ordered a LPE dual fuel pump so I should be set. I got some 305/35R20 Nitto 555Rs for the back too. I know I will need a clutch and axles soon but that has to wait until they break, I am also looking at the RPM bolt in roll cage since I am thinking I will be around the mid to low 11's. __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets Last edited by Turbo99; 03-25-2011 at 04:57 PM.

03-23-2011, 11:24 AM	#3
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	Oh it will be tweaked by Ted for sure, either by data logging and email tweaks or I am thinking of seeing if he wants a flight to Florida for a live tune session. __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

03-23-2011, 11:50 AM	#4
GMRULZ Drives: 2010 SS & 2008 C6 Join Date: Mar 2008 Location: VA Posts: 1,819	Oh yeah, thats what I`m talking about!!! Yep Ted can get that puppy perfect, its his kit so you know he knows every fine minutia to dial her in perfect! __________________ 2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter. Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s! Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..

03-23-2011, 12:04 PM	#5
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	I am hoping around 600rwhp and some low 11's with the manual tranny and some extreme fun on the street! __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

03-23-2011, 03:43 PM	#7
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	Yeah I am worried about getting booted too, that is why I was thinking of not doing the pulley upgrade, I think I want to wait a little while to cage it but I also like the safety factor of the cage. Look forward to seeing you at the track. __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

03-23-2011, 03:31 PM	#6
Jchaluja Drives: ZL1 Camaro Join Date: Feb 2009 Location: Jacksonville, FL Posts: 1,321	sweet build....I'll be looking for your car at Gainesville track!! (once I install my cage)....I'll get kicked out as of now....

03-23-2011, 03:58 PM	#8
1 bad azz ls3 Drives: 2010 camaro ss Join Date: Jun 2010 Location: new york Posts: 292 View My Garage	i just finished putting in a vortech ysi with a cog drive. i also have a jre blower cam and a Adm fuel system with meth.. all i can say is it is a lot of power. and ted is second to none when it comes to tuning.

03-25-2011, 02:02 PM	#9
Turbo99 Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010 Location: Gainesville,Fl Posts: 1,362 View My Garage	Well I just did it!!! Ordered the TVS2300,and lope idle blower cam kit, LPE dual pump,catch can and COG DRIVE!!!! Can't wait to get it and get it all installed!!!! Also got some 305/35R20 Nitto 555R's __________________ 08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph 10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets

03-25-2011, 03:06 PM	#12
Notneb Drives: 2006 Dodge Viper Join Date: Sep 2010 Location: Washington Posts: 133 View My Garage	Don't forget to post video's of the end result!!! Some of us have to survive of the vids of others until we get enough money saved up :p 5 More Months!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HPE650 vs Jay Leno Body Kit, which one do you like?	nardox	Camaro Photos \| Spyshots \| Video \| Media Gallery	3	10-13-2010 11:37 AM
Photoshop Pro please photoshop thos wheel on my car before I pull trigger	55Designs	Camaro Photoshops / Renderings Forum	6	01-05-2010 09:42 PM
Rear hatch pull down unit rebuild kit	camarolt76	3rd Generation Camaros	1	07-28-2009 12:45 PM
Should I pull the trigger	Fogey	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	3	05-15-2009 07:07 PM
Should I pull the trigger	Fogey	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	2	05-15-2009 05:20 PM