Plasti Dipped Interior in Red - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

STEALTH_MODE · 01-15-2012, 05:12 PM

the steering wheel is easy. You just need to disconnect the battery first. Then you have to release the steering wheel cap by sticking a thing screwdriver in the back holes (there are some springed release buttons on both sides). Remove the cap then remove the airbag, it has 3 cables, color coded so it is easy to put back. With a little unclipping and tug it comes right off. Then just pop the steering wheel bezel off. Sounds complicated but it's super easy when you're actually doing it.

Chrisrp454 · 01-27-2012, 10:17 AM

Does this stuff rub off easy, seem like it does from my experiance?

GEEo · 01-27-2012, 10:19 AM

Not bad.

ubrimah · 01-27-2012, 02:47 PM

Quote:

Originally Posted by GEEo

Not bad.

Thanks. Just need to do the door panels.

SoCalThug · 02-22-2012, 12:54 AM

Do the dash pieces just clip off and on?

DJ UNKNOWN · 02-23-2012, 12:58 PM

Quote:

Originally Posted by Revo1

Lol

saahilrtrivedi · 08-28-2012, 11:32 AM

Nice!

Leem12 · 01-18-2013, 03:54 PM

Quote:

Originally Posted by ubrimah

The rest of the pics are in my build thread. I was too lazy to upload them here...

how do you get the trim off to spray and how did you do the center?

knitetrain05 · 01-18-2013, 04:07 PM

I dont get it? why bother monkeying around spending money on something like that?

Devilstrip12 · 01-18-2013, 04:10 PM

That looks damn good man. i was thinking of doing that with my car but i cant seem to fine any good light blue color.

Devilstrip12 · 01-18-2013, 04:29 PM

Question would the plasti dip work well with the cloth interior on the 1LT?

trewyn15 · 01-18-2013, 05:39 PM

Nice, I did that in my monte but had trouble with it peeling off when barely touched, since there's a pretty big risk of it being damaged in the interior.

MackMan · 01-19-2013, 12:38 AM

Quote:

Originally Posted by Devilstrip12

That looks damn good man. i was thinking of doing that with my car but i cant seem to fine any good light blue color.

They've got a blue blaze now that's kind of a light blue.

dipyourcar.com

Quote:

Originally Posted by Devilstrip12

Question would the plasti dip work well with the cloth interior on the 1LT?

Pull the cloth off and get all the glue off, then paint them. Pretty simple.

Ubrimah - I didn't even unhook the airbag to take the steering wheel bezel off. Probably would have been a bit easier, but I read that if you break those connectors it is expensive to fix. I just unplugged the battery for 15 minutes, poked a screw driver in the holes, pried on the bezel and it fits over the airbag cap. I put painters tape over the bezel when putting it back on just incase it was to scratch. Worked nicely.

Looks great so far. Keep it up, headed to check your build thread now.

menendez1293 · 01-19-2013, 12:46 AM

It's looking great. I had no idea plasti dip came in red.

01-27-2012, 10:17 AM	#30
Chrisrp454 Drives: 2010 ABM 2SS/RS M6, 98Z28 M6 Join Date: Jan 2008 Location: Granbury, Tx Posts: 1,532 View My Garage	Does this stuff rub off easy, seem like it does from my experiance? __________________ Always Remember! Rest in Peace Brothers 9/11/2001. And thanks to all those who defend and serve! Ordered 5/23/2009 3400 with TPW of 08/03/09 3800 8/11/2009 Arrived 8/21/2009 2SS/RS/Aqua Blue/Grey Interior

01-18-2013, 05:39 PM	#40
trewyn15 Drives: 2004 Monte Carlo LS Join Date: Nov 2012 Location: Janesville, WI Posts: 2,414	Nice, I did that in my monte but had trouble with it peeling off when barely touched, since there's a pretty big risk of it being damaged in the interior. __________________ 2004 Monte Carlo LS - 1966 AMC Rambler Rebel Classic - 2000 Trans Am WS6

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BIG RED - The WORLDS BADDEST CAMARO and its '69 Z/28 non the less (True Story)	NOODLESgoneWILD	1st & 2nd Generation Camaros	12	10-01-2014 09:15 AM
Crystal Red Tintcoat question	GrandPrixGXP	5th Gen Camaro SS LS LT General Discussions	26	01-29-2012 11:29 AM
Silver stays top color for vehicles; red, orange rise	KILLER74Z28	General Automotive + Other Cars Discussion	12	11-13-2009 07:27 PM
Please read and support our troops --	fbodfather	Off-topic Discussions	4	12-06-2007 07:52 PM

01-15-2012, 05:12 PM	#29
STEALTH_MODE I have a V6, so what? Drives: Top Secret Join Date: Mar 2011 Location: Shhhhhh Posts: 185	the steering wheel is easy. You just need to disconnect the battery first. Then you have to release the steering wheel cap by sticking a thing screwdriver in the back holes (there are some springed release buttons on both sides). Remove the cap then remove the airbag, it has 3 cables, color coded so it is easy to put back. With a little unclipping and tug it comes right off. Then just pop the steering wheel bezel off. Sounds complicated but it's super easy when you're actually doing it.

01-27-2012, 10:19 AM	#31
GEEo OKCamaros Drives: 4 banger Diesel Join Date: Mar 2010 Location: Philippines Posts: 4,572	Not bad.

02-22-2012, 12:54 AM	#33
SoCalThug Drives: 2012 Summit White 1Ls Join Date: Jan 2012 Location: Diamond Bar, Cali Posts: 898	Do the dash pieces just clip off and on?

08-28-2012, 11:32 AM	#35
saahilrtrivedi VICTORY 11 Drives: 2011 Black 2LTRS with OrangeStripes Join Date: Dec 2011 Location: NYC Posts: 227	Nice!

01-18-2013, 04:07 PM	#37
knitetrain05 Account Suspended Drives: 2012 Camaro SS 45th Anniversary Edi Join Date: Nov 2011 Location: Rochester, New York Posts: 523 View My Garage	I dont get it? why bother monkeying around spending money on something like that?

01-18-2013, 04:10 PM	#38
Devilstrip12 Drives: 2011 1LT RS imperial blue camaro Join Date: Oct 2011 Location: Los Angeles Posts: 107	That looks damn good man. i was thinking of doing that with my car but i cant seem to fine any good light blue color.

01-18-2013, 04:29 PM	#39
Devilstrip12 Drives: 2011 1LT RS imperial blue camaro Join Date: Oct 2011 Location: Los Angeles Posts: 107	Question would the plasti dip work well with the cloth interior on the 1LT?

01-19-2013, 12:46 AM	#42
menendez1293 Emerald Coast Camaros Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009 Location: Tallahassee FL Posts: 9,687 View My Garage	It's looking great. I had no idea plasti dip came in red.