315/35-20 fit on rear of ZL1????? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tpower · 11-23-2012, 08:39 AM

I run Nitto 315 NT05Rs on my ZL1 no issues

12 ZL1 #1725 · 11-23-2012, 09:58 AM

Quote:

Originally Posted by tpower

I run Nitto 315 NT05Rs on my ZL1 no issues

What do you run on the front??

12 ZL1 #1725 · 11-23-2012, 09:59 AM

Thank you all for the feedback I really appreciate it!!!!

01pewterz28 · 11-23-2012, 11:02 AM

Yes I have 315's on my ZL1 wheels

The Baron · 11-23-2012, 12:51 PM

The car comes with305s.. a315 is not even a question... i want to see that 345

The_Raging_Bull · 11-29-2012, 09:24 PM

Quote:

Originally Posted by 12 ZL1 #1725

Thank you all for the feedback I really appreciate it!!!!

I'll second that, post the pics of the 345 once its on the stock rear rim please.

Stephen12ZL1 · 11-29-2012, 09:27 PM

Quote:

Originally Posted by The Baron

The car comes with305s.. a315 is not even a question... i want to see that 345

me too

*radz28* · 11-30-2012, 08:44 AM

I was thinking 335s would be a reasonable limit, but I wanna' see some 345s!

Sven59 · 11-30-2012, 09:10 AM

Can you go 335s or 345s with the factory wheels?

69NMYSS · 11-30-2012, 10:22 AM

Quote:

Originally Posted by Sven59

Can you go 335s or 345s with the factory wheels?

Personally, looking at the 305's on there, I dont see how a 345 would fit? There would be a lot of sidewall sticking out and possibly rolling. Would definetly not be taking her on the track. What size rims are on the Z06? I beleive they have 345's?

Sven59 · 11-30-2012, 11:52 AM

Quote:

Originally Posted by 69NMYSS

Personally, looking at the 305's on there, I dont see how a 345 would fit? There would be a lot of sidewall sticking out and possibly rolling. Would definetly not be taking her on the track. What size rims are on the Z06? I beleive they have 345's?

I don't want them for the track, just street use.

tsnow · 11-30-2012, 02:10 PM

M&H Racemaster 325/40R18 Drag Radial

An 18", but I think this is about as wide as one could go that is near stock tire height, not sticking out past the quarters (with proper wheel offset) and without body mods.

Good2go · 12-01-2012, 08:51 AM

I don't have ZL1 wheels, but have 11" Forgelines and NT05 315's in the back. No clearance issues.

Wondering · 12-02-2012, 07:51 AM

Quote:

Originally Posted by 69NMYSS

Personally, looking at the 305's on there, I dont see how a 345 would fit? There would be a lot of sidewall sticking out and possibly rolling. Would definetly not be taking her on the track. What size rims are on the Z06? I beleive they have 345's?

19x12 standard.....and they come stock with a 325 GY. But lots of guys,including myself,have went to a 345 with no issues.

11-23-2012, 08:39 AM	#15
tpower DBLCHBY III Drives: 15 1LE Join Date: Jun 2011 Location: Team Canada Posts: 2,789	I run Nitto 315 NT05Rs on my ZL1 no issues __________________

11-23-2012, 11:02 AM	#18
01pewterz28 #TeamBeckyD Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008 Location: Apopka, FL Posts: 10,496 View My Garage	Yes I have 315's on my ZL1 wheels __________________ #TeamBeckyD FIFTY HBM 2SS VERT

11-30-2012, 08:44 AM	#22
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,192 View My Garage	I was thinking 335s would be a reasonable limit, but I wanna' see some 345s! __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

11-30-2012, 09:10 AM	#23
Sven59 HAMMER PILOT Drives: 13 ZL1#182, 85 CJ7, 16 Silverado Join Date: Nov 2011 Location: Tucson AZ Posts: 4,386	Can you go 335s or 345s with the factory wheels? __________________ "DO YOU WANT ME TO PUT THE HAMMER DOWN?"

11-30-2012, 02:10 PM	#26
tsnow Drives: 12' ZL1, AGM 6M Join Date: Jun 2009 Location: 49th state Posts: 249	M&H Racemaster 325/40R18 Drag Radial An 18", but I think this is about as wide as one could go that is near stock tire height, not sticking out past the quarters (with proper wheel offset) and without body mods. Last edited by tsnow; 11-30-2012 at 02:30 PM.

11-23-2012, 09:59 AM	#17
12 ZL1 #1725 Drives: 2012 ZL1 Black 6M Join Date: Oct 2012 Location: Pennsylvania Posts: 1,117 View My Garage	Thank you all for the feedback I really appreciate it!!!! __________________ Sit Back and Enjoy The Ride!!

11-23-2012, 12:51 PM	#19
The Baron Drives: 2013 zl1 Join Date: Nov 2012 Location: st louis Posts: 838	The car comes with305s.. a315 is not even a question... i want to see that 345

12-01-2012, 08:51 AM	#27
Good2go Team Chevrolet Drives: 2007 Z06 and 2011 Camaro 2SS Join Date: Jan 2011 Location: San Antonio Posts: 441 View My Garage	I don't have ZL1 wheels, but have 11" Forgelines and NT05 315's in the back. No clearance issues. __________________ Forgeline GA3's 9.5/11 with NT-05 Nitto's, Pedders Sportsryder Supercar Coilovers, MGW Shifter, LPE GT1-1 Cam, AR 1 7/8" LT's, Halltech CAI, SW Retro Chambered Cat-Back, Installed and tuned by Corey @ Henderson Performance Technology.