Stainless works 1 7/8 - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

kook · 04-07-2011, 12:41 AM

I have SW 1 7/8 with magnaflow street cat back. Love the sound. My cam and other goodies are going in this week.

Snake Slayer · 04-07-2011, 07:45 AM

Quote:

Originally Posted by kook

I have SW 1 7/8 with magnaflow street cat back. Love the sound. My cam and other goodies are going in this week.

Any clips? I have 1 7/8 with no cats on order and just swapped out my magnaflow comp catback for a street series to keep the noise in check.

Mark Myles · 04-07-2011, 07:51 AM

Quote:

Originally Posted by Snake Slayer

Any clips? I have 1 7/8 with no cats on order and just swapped out my magnaflow comp catback for a street series to keep the noise in check.

LOL...I was thinking the samething. I would like to hear headers with Magnaflow street series....

M

JANNETTYRACING · 04-07-2011, 08:44 AM

Quote:

Originally Posted by brantley847

I know a few of you guys run with SW. How are your feelings on the product and how was installation? Trying to do some research on their LTs. I noticed they recently went to the merge spike, but haven't heard quite as much about SW as I have about Kooks and ARH.

We have used them in a few of our builds and they are a very high quality great fit and finish.

We Like them we offer them and We use them.

Ted.

kook · 04-07-2011, 11:03 AM

Quote:

Originally Posted by Snake Slayer

Any clips? I have 1 7/8 with no cats on order and just swapped out my magnaflow comp catback for a street series to keep the noise in check.

Mine are without cats but I can't get you a sound clip until I get my car back next week. All I can tell you is I had a corsa cat back when they were put on and it was so loud that I hated it and immediately ordered a new exhaust and if fixed the problem.

Snake Slayer · 04-08-2011, 09:00 PM

Quote:

Originally Posted by kook

Mine are without cats but I can't get you a sound clip until I get my car back next week. All I can tell you is I had a corsa cat back when they were put on and it was so loud that I hated it and immediately ordered a new exhaust and if fixed the problem.

Hey guys I received my headers today and plan on installing them tomorrow. I read the instructions and they claim that the steering shafts need to be collapsed is this correct?

10aSSee D · 04-08-2011, 10:24 PM

I took mine loose at the joint to make things easier. Just mark it and unbolt it, not a big deal.

IROCanSS · 04-08-2011, 10:33 PM

Quote:

Originally Posted by spacecowby

I have SW on mine and I think they are great. No problem with installation and matched right up to my flowmasters.

Ditto with me...

SW 1-7/8", no cats, Flowmaster A/T... LS3 stock cam, plenty of lope for me. I have been asked if the car is cammed so unless the cam ninjas put one in... Sorry no sound clips. I took one with my iphone but it sounds like crap-ola!

HP Addicts · 04-08-2011, 11:12 PM

You can't go wrong with Stainless Works, I have one of their full systems on my personal car and the fit/finish, sound, and performance are all amazing.

Apex Motorsports · 04-09-2011, 04:57 AM

Quote:

Originally Posted by Snake Slayer

Do it man get them!

Matster · 04-09-2011, 05:41 AM

Quote:

Originally Posted by HP Addicts

You can't go wrong with Stainless Works, I have one of their full systems on my personal car and the fit/finish, sound, and performance are all amazing.

+1 I don't have the room in my garage to do any work on my car so I had a local performance shop do it for me. They said "it was the nicest and easiest exhaust system they had ever installed". 2" headers, 3" high flow cat exhaust.

Do it, you won't be disappointed!

Here http://www.camaro5.com/forums/showth...91#post2913691 is a link to a previous thread with some video.

04-07-2011, 12:41 AM	#15
kook Drives: 2010 2SS Yellow Join Date: May 2010 Location: Indiana Posts: 548 View My Garage	I have SW 1 7/8 with magnaflow street cat back. Love the sound. My cam and other goodies are going in this week. __________________ Edelbrock E-Force Stainless Works Lts Roto Fab CAI Magnaflow Street Cat-Back DOD Delete Forgestar F-14's and Pedders XA + PKG Custom grind cam from Cincy Speed ADM dual fuel pump ADM AF/Boost gauges FTI 3200 convertor Hurst shifter Cincy Speed Build and Tune 540rwhp

04-08-2011, 10:24 PM	#21
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	I took mine loose at the joint to make things easier. Just mark it and unbolt it, not a big deal. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 05:32 PM
Stainless Works Step-Headers Now Available At APEX-Camaro5's #1 Source For SW!!	Apex Motorsports	V8 Bolt-Ons & Tunes	13	01-07-2011 04:23 PM
A new option for those after maximum performance gains: Stainless Works Step-Headers!	Apex Motorsports	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	12	12-17-2010 08:05 AM
Stainless Works	2L82RUN	Vendor and Seller review / feedback / experiences	6	05-23-2010 09:43 PM
LMPerformance, Stainless Works 2010 Camaro 6.2L 3'' Dual Exhaust	LMPerformance	V8 Bolt-Ons & Tunes	0	12-14-2009 01:38 PM

04-08-2011, 11:12 PM	#23
HP Addicts Drives: N/A Join Date: Jan 2011 Location: Delray Beach, FL Posts: 898	You can't go wrong with Stainless Works, I have one of their full systems on my personal car and the fit/finish, sound, and performance are all amazing.