Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals


Reply
 
Thread Tools
Old 03-04-2011, 09:59 PM   #71
Blue70SS

 
Blue70SS's Avatar
 
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry
Join Date: Aug 2009
Location: Denver
Posts: 2,126
Quote:
Originally Posted by speedster View Post
Congratulations on COTW.

You have beautiful ride and it goes too !!

Those Forgelines really set it off in your last few pics. Nice.

Glad you are going to C5Fest2. Should be a blast - just keep Larry away...lol
Thanks, and oh... Larry has an RPM rollcage now. Helped him stuff it in - took 3 of us. Tight fit, but looks nice. Don't think any of us will catch you LOL.
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 03-04-2011, 10:14 PM   #72
speedster
SST...
 
speedster's Avatar
 
Drives: SST Camaro 2010
Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
Quote:
Originally Posted by Blue70SS View Post
Thanks, and oh... Larry has an RPM rollcage now. Helped him stuff it in - took 3 of us. Tight fit, but looks nice. Don't think any of us will catch you LOL.
Ha - Mr. Cagefighter with Harry.

It'll be fun seeing you at C5Fest2. Should be a blast. Hopefully we all get some runs in at Firebird. You can do some killer launches with your Bogarts.

And again - Congrats on COTW. You have taken the time to do some incredible mods and detail work on your Camaro and it shows.
__________________
speedster is offline   Reply With Quote
Old 03-04-2011, 11:09 PM   #73
Blue70SS

 
Blue70SS's Avatar
 
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry
Join Date: Aug 2009
Location: Denver
Posts: 2,126
Powdercoated FNR Rollbar installed.....

Couldn't let "2010 SS RS" have all the fun
Attached Images
 
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.

Last edited by Blue70SS; 03-04-2011 at 11:23 PM.
Blue70SS is offline   Reply With Quote
Old 03-05-2011, 11:05 AM   #74
speedster
SST...
 
speedster's Avatar
 
Drives: SST Camaro 2010
Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
Nice...

Kicked up a notch !!
__________________
speedster is offline   Reply With Quote
Old 03-05-2011, 01:53 PM   #75
fisherssmoke
 
fisherssmoke's Avatar
 
Drives: Black SS
Join Date: Jan 2010
Location: Indy
Posts: 254
Nice build and thread, Congrats.
__________________
fisherssmoke is offline   Reply With Quote
Old 03-05-2011, 09:50 PM   #76
Blue70SS

 
Blue70SS's Avatar
 
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry
Join Date: Aug 2009
Location: Denver
Posts: 2,126
Okay, time to come clean...

I had to mess with "2010 SS RS" - Larry, and was hoping to get a rise out of "mtcwby" - Don. Had to make it look real, so posted in a few places. Larry already picked up on it ..... I got to help install an RPM in his Larry's last weekend along with Brian from Laramie Chevrolet. I'm just not quite ready to loose my rear seat. But the thought of needing one is quite entertaining.

So here's the cost and options for the FNR Rollbar system (Fun Noodle Rollbar):

Purple, Yellow, Red, or Blue.... $15
Attached Images
  
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 03-06-2011, 06:48 AM   #77
speedster
SST...
 
speedster's Avatar
 
Drives: SST Camaro 2010
Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
Quote:
Originally Posted by Blue70SS View Post
Okay, time to come clean...

I had to mess with "2010 SS RS" - Larry, and was hoping to get a rise out of "mtcwby" - Don. Had to make it look real, so posted in a few places. Larry already picked up on it ..... I got to help install an RPM in his Larry's last weekend along with Brian from Laramie Chevrolet. I'm just not quite ready to loose my rear seat. But the thought of needing one is quite entertaining.

So here's the cost and options for the FNR Rollbar system (Fun Noodle Rollbar):

Purple, Yellow, Red, or Blue.... $15
Holy Cow - That thing is made out of "Floatie Noodles" ?

You had me fooled - Doh !
Looks just like the Firebird's first rollcage covered in blue instead of black.

That is f'n awesome !!!

Ha, ha - do you think it'd pass tech inspection... j/k.

Nice one. You need to drive around C5Fest2 with that thing in place and then pop out the sidebar when you are in the parking lot and staging lanes... You do know that it looks like the cage FastLane had in their car at the original C5Fest? Wish I had a pic. You'd laugh your a.. off.
__________________
speedster is offline   Reply With Quote
Old 03-07-2011, 10:53 PM   #78
Blue70SS

 
Blue70SS's Avatar
 
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry
Join Date: Aug 2009
Location: Denver
Posts: 2,126
Drive shaft solution ordered - DSS Carbon Fiber DS!
Attached Images
 
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 03-09-2011, 10:43 PM   #79
Blue70SS

 
Blue70SS's Avatar
 
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry
Join Date: Aug 2009
Location: Denver
Posts: 2,126
Elite Engineering Oil Catch Can Install Pics

Installed pictures....

1st 2 pics shows oil caught in 270 mile road trip at ~65-75 MPH on interstate. Measures about 1 teaspoon.

I enlarged the mounting hole, plus used a different bolt and washer below the modified Elite bracket to get over the hump on the old air filter box mounting bracket. The stainless nut has a large locking flange base on it.... had a bag of them from my PV Solar System Array install that I special ordered from Fastenal.

Last pic is 210 miles in town driving - didn't measure yet, but looks like a little more. I will be interesting to compare results with another member on trip to Cfest, dragstrip festivities, and Pfadt Track Attack session The other member is running a different unit on a stroked Eforce supercharged engine, but is using breather cap that requires a tune - due to using unmetered filtered air. I like my polished one that doesn't mess with our tunes!
Attached Images
           
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 03-09-2011, 11:41 PM   #80
Blue70SS

 
Blue70SS's Avatar
 
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry
Join Date: Aug 2009
Location: Denver
Posts: 2,126
Still my favorite Pic

Now this was fun!!!!! ... had to let up (seemed pointless to go further... just kept spinning )
Attached Images
 
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-03-2011, 03:28 PM   #81
Blue70SS

 
Blue70SS's Avatar
 
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry
Join Date: Aug 2009
Location: Denver
Posts: 2,126
New Weld Racing rims installed.....

A few adjustment for clearances, but all good now!
Attached Images
      
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-03-2011, 07:00 PM   #82
speedster
SST...
 
speedster's Avatar
 
Drives: SST Camaro 2010
Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
Wow

Those look really great on there. Still has the stance and all. Very nice. Those M&H's should give you some good bite at the track.
__________________
speedster is offline   Reply With Quote
Old 04-05-2011, 07:13 PM   #83
Blue70SS

 
Blue70SS's Avatar
 
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry
Join Date: Aug 2009
Location: Denver
Posts: 2,126
Quote:
Originally Posted by speedster View Post
Wow

Those look really great on there. Still has the stance and all. Very nice. Those M&H's should give you some good bite at the track.
I'm hoping so..... hopefully I'll get to try them out this Saturday.

See ya at the fest!
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-05-2011, 07:33 PM   #84
600hp-lpe


 
Drives: 2010
Join Date: Jul 2009
Location: NH
Posts: 4,788
Quote:
Originally Posted by Blue70SS View Post
I'm hoping so..... hopefully I'll get to try them out this Saturday.

See ya at the fest!

You got it!!
600hp-lpe is offline   Reply With Quote
 
Reply

Tags
650, blue70ss, ccotr, lingenfelter, lpe

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speedster's SST Camaro Build Thread [COTW 9/13/10] speedster Member Car Journals 5783 05-10-2023 07:49 PM
Firefighter1 Build Thread [COTW 11/8/10] firefighter1 Member Car Journals 95 02-12-2013 08:00 PM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp! Sizzox 5th Gen Camaro SS LS LT General Discussions 108 04-14-2010 07:09 PM
Lingenfelter 650 hp build mws444 Forced Induction - V8 546 12-26-2009 11:23 AM
My Lingenfelter Camaro Build Speed74SS Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 244 10-08-2009 10:00 PM


All times are GMT -5. The time now is 04:59 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.