08-08-2012, 02:15 PM | #1 |
Drives: 2010 SS/RS Join Date: Jun 2012
Location: Benton Harbor, MI
Posts: 182
|
Halo Super Cars Strut Tower Brace
We are pleased to introduce our new Halo Super Cars strut tower brace. This dual 11ga. heavy wall tube brace is fully TIG welded to CNC cut brackets and includes CNC machined tower caps. They come powdercoated gloss black or are available in raw steel if you want to have them painted to match. 3 bolts on top and 1 in each tower side is all it takes to mount this brace in, while still giving you the ability to remove the brace without having to remove your struts. Unlike most braces, this will fit ALL model years 2010+ and both V6 & V8! Place your order HERE for the Camaro5 intro price of $259+ shipping($239 for raw steel) for the month of August! Just enter "Camaro5 intro price" in the order notes and your price will be adjusted when processed. Last edited by Halo Super Cars; 08-14-2012 at 08:32 AM. |
08-14-2012, 08:33 AM | #2 |
Drives: 2010 SS/RS Join Date: Jun 2012
Location: Benton Harbor, MI
Posts: 182
|
Only a couple weeks left for the intro pricing
|
08-14-2012, 04:56 PM | #3 |
Don't Like it? Suggit.
|
Straight across design looks rigid... bump
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp |
08-14-2012, 05:04 PM | #4 |
Drives: '12 Ducati Monster 796 Join Date: Jul 2012
Location: SoMd
Posts: 49
|
damn looks awesome, may have to get one
__________________
Looking for a '10-'11 CGM 2SS/RS 6spd Buy my Ducati! Professional detailer in the MD/DC/NoVA area StreetDreamsDetail@yahoo.com |
08-16-2012, 04:34 AM | #5 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
How much clearance is there between the brace and the v6 engine? I ask because I have a 1inch manifold insulator as well as a 10mm plenum spacer.
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
08-16-2012, 10:30 AM | #6 |
Drives: 2010 SS/RS Join Date: Jun 2012
Location: Benton Harbor, MI
Posts: 182
|
Thanks guys, we tried to design something that was extremly strong and looked great at the same time.
I don't have an exact measurement on the V6 off hand, but will try and get one, but I'm pretty sure there's around 1.5 inches. |
08-16-2012, 09:00 PM | #7 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
I would appreciate that, those 2 pieces take up 1.38 inches. Also, I would not have engine cover on. Could you measure without the engine cover. Thanks.
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
08-17-2012, 06:26 PM | #8 |
Drives: 2010 SS/RS Join Date: Jun 2012
Location: Benton Harbor, MI
Posts: 182
|
Ah, you're definitely safe then, it's about 1.5" to the cover, and it's mainly on the outer edges where it gets closest to the bar. I'll still see if we can't get a V6 to measure.
|
08-21-2012, 03:20 PM | #9 |
Drives: 2011 Camaro LS Join Date: Feb 2011
Location: Southern California
Posts: 2,920
|
I have a 2011. the factory holes should match up perfectly with this right?
btw i love this design..i've been looking around for a strut tower brace but i've never found one that i liked until now
__________________
|
08-21-2012, 04:15 PM | #10 |
Drives: 2010 SS/RS Join Date: Jun 2012
Location: Benton Harbor, MI
Posts: 182
|
No it does not match the factory holes. It just requires 3 holes to be drilled on top and 1 in the side of each tower, not hard to install at all.
|
08-23-2012, 09:00 PM | #11 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
Could you take a picture of the installed brace head on from the front of the engine bay. I just want to visually see the clearance since it will be a tight fit. Thanks.
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
08-26-2012, 09:39 AM | #12 |
I fly
Drives: 2010 2SS, Stick, Cyber Gray Join Date: Sep 2011
Location: Harker Heights, Texas
Posts: 295
|
pm info please, looks great!
__________________
There are only two options in life. Fight or flight. Most people run. Almost all people run. But not us. The difference between us and everyone else is that we run towards the gunfire. And that makes all the difference.
|
08-30-2012, 10:48 AM | #13 | |
Drives: 2010 SS/RS Join Date: Jun 2012
Location: Benton Harbor, MI
Posts: 182
|
Quote:
PM Sent |
|
08-30-2012, 04:04 PM | #14 |
Drives: 2010 SS/RS Join Date: Jun 2012
Location: Benton Harbor, MI
Posts: 182
|
Also, just finished our Trans Tunnel Brace that will also allow you to run a 3" exhaust with plenty of room and still plenty of ground clearance.
Tested on our car with air ride suspension to ensure even the lowest of cars won't have an issue. Normal price is $89+ shipping but for a limited time, we'll be offering a Camaro5 intro price of $75 shipped. Place your order here. Just put "Camaro5 intro price $75" in the order notes, and we'll make the adjustment when processing your order. |
|
|
Tags |
halo super cars, strut bar, strut brace, strut tower brace |
|
|