10-02-2012, 07:31 PM | #1 |
chevy pride
|
fastest 1/4 on pzero, and all factory drive tran
lookin to see what ppl are getting , with all factory drive line stuff, u can have all the hp , but no axels, no driveshaft , no suspention, no aftermarket tires, no clutchs ,or stalls.
who has the fastest time, and list if u broke any parts later on tryin to get a good reference for ppl , to understand what parts start breakin at what times they were running vs hp.
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
10-02-2012, 10:16 PM | #2 |
Drives: 2010 camaro 2SS LS3 Join Date: Aug 2011
Location: Denver
Posts: 1,334
|
there is a fast list on here
http://www.camaro5.com/forums/showthread.php?t=52264 pretty self explanatory. yes alot of parts will break if you track it. with full stock motor, ideally you should get 1000+runs before you break. the breaks happen very easy after you add a little go-go
__________________
stage III cam, 4.10's, custom CAI, suede headliner
461 RWHP, 422 RWTQ |
10-03-2012, 05:49 AM | #3 |
chevy pride
|
ya , im lookin for just all stock tho, other then hp mods. dont need a time slip just post the time. then want to know if u broke anything .
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
10-03-2012, 10:36 AM | #4 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
12.31@114 with all stock except a stall. Seemed only worth it to realize the benefit of all the other stuff that I was adding at the time, so...I'm about 90% within your request!
I think it has a little left!
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
10-03-2012, 10:38 AM | #5 |
Drives: 2011 Silver 2SS/RS L99 Join Date: Jul 2011
Location: Louisiana
Posts: 191
|
Parag, I see you have 4.10's, are you mainly road r4ace or have to tried those in the strip? I'm curious as to what your thought are.
__________________
2011 2SS/RS L99
10.76@130.5 1.67 60' LG headers and exhaust, 3200 Yank, EPS Cam, D1SC Procharger, all work performed by Blanchard Performance |
10-03-2012, 06:13 PM | #6 |
Drives: Fire Engine Join Date: Oct 2008
Location: WPB, Florida
Posts: 1,415
|
11.6 @ 121 with a supercharger. No driveline or suspension mods. stock tires.
__________________
12.618 @ 110.75 Bone Stock 1/4 mile
8.165 @ 86.52 Bone Stock 1/8 mile 11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires. Sold |
10-04-2012, 01:55 AM | #7 |
Drives: 2010 camaro ss Join Date: Dec 2010
Location: acworth ga
Posts: 1,721
|
|
10-04-2012, 01:59 AM | #8 |
CamaroFans.com
|
Are you looking to see how far you can go before breaking something?
Limits etc?? |
10-04-2012, 03:09 AM | #9 |
Drives: 2010 camaro ss Join Date: Dec 2010
Location: acworth ga
Posts: 1,721
|
|
10-04-2012, 04:32 AM | #10 |
Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011
Location: ROCKMART, GA
Posts: 2,185
|
|
10-04-2012, 05:06 AM | #11 |
Drives: 2010 camaro ss Join Date: Dec 2010
Location: acworth ga
Posts: 1,721
|
That's what I thought I would run but I wasn't sure
Last edited by ken53007; 10-04-2012 at 05:17 AM. |
10-04-2012, 07:23 AM | #12 |
chevy pride
|
ya just tryin to see where ppl are on stock stuff and where its starting to break
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
10-04-2012, 08:03 AM | #13 |
Drives: 2011 2ss/rs Join Date: Aug 2010
Location: houston
Posts: 531
|
11.9@124 or 123 g6x3 car and a little spray.
|
10-04-2012, 08:07 AM | #14 |
Drives: 2011 2ss/rs Join Date: Aug 2010
Location: houston
Posts: 531
|
That was all stock drivetrain and clutch even.
|
|
|
|
|