09-24-2012, 03:11 PM | #1 |
Drives: 2013 2SS Join Date: Aug 2012
Location: Salt Lake City, UT
Posts: 372
|
CAI's intake installed... cosmetically, i blew it
So i'm really really smart...
... and i just wanted to whine/ give any future installers a heads up. I was installing my CAI intake, putting on the lid, and one of the little screws slipped and my screw driver went flying across the glass screen and put a scratch across it. Obviously not a huge deal to some, but just the fact that i know it's there because of that stupid little screw slipping really makes me mad So just be careful while putting on the lid and messing with those little annoying spring loaded screws.... If you're not careful they'll spring trap your screw driver into putting an annoying scratch into your intakes glass top. Ps. I know this is my fault and not trying to hate on CAI at all. It's a great intake, great quality, i'm just mad that the spring loaded screw slipped and caused me to scratch the sh!t out of the lid. This is obviously a really heartbreaking situation for me, so any condolences would be greatly appreciated. Picture doesn't give it justice.. I'm guessing this incident will result in a major HP loss too.
__________________
|
09-24-2012, 03:14 PM | #2 |
Drives: 2010 SS/RS M6/2500HD Lmm LTZ Join Date: Apr 2012
Location: South Georgia
Posts: 2,543
|
That kind of chit gets to me too. I can do a header install without scratching something and the dealer cant check my wiper fluid without scratching something :(
|
09-24-2012, 03:20 PM | #3 |
|
I think its nothing more than plexi glass. Remove the plexi glass and find someone who can cut you a new one using the old one as a template. Shouldn't cost to much.
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
09-24-2012, 03:21 PM | #4 |
Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008
Location: Central Point, OR
Posts: 5,688
|
Maybe it will buff out? Send Bill @ CAI an email, I'm sure they wouldn't have a problem selling or maybe even giving you a new window.
|
09-24-2012, 03:26 PM | #5 |
Drives: 2013 2SS Join Date: Aug 2012
Location: Salt Lake City, UT
Posts: 372
|
You always have the best ideas
__________________
|
09-24-2012, 05:07 PM | #6 |
|
Love the sarcasm....and yes just hit em up im sure they can sell you a new piece of glass. not sure hot its attached as i don't own one but it shouldnt be hard.
|
09-24-2012, 05:16 PM | #7 |
Anabolic Connoisseur
Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010
Location: Oklahoma
Posts: 22,094
|
I had this exact thing happen to me with my install. Definitely send bill an email. I emailed him and explained what happened, and he sent me a window replacement no questions asked. He is one hell of a guy and backs his products!
__________________
|
09-24-2012, 05:29 PM | #8 |
Account Suspended
|
Plastic polish (plastX or headlight restorer)
|
09-24-2012, 05:57 PM | #9 |
It looks like it could be buffed out, from the pic doesnt look to deep. It would bug me to man so I feel your pain!
|
|
09-24-2012, 06:08 PM | #10 |
Drives: 2012 45 Anniversary Vert Join Date: Apr 2012
Location: atlanta
Posts: 2,511
|
try windex and steel wool....believe it or not it takes scratches out of windshields....just spray a good amount of windex on the glass and buff away with steal wool....
or maybe try that chip fix kit they sale at the store, maybe you can use that. |
09-24-2012, 06:23 PM | #11 |
Hate when i do stuff like that.
|
|
09-24-2012, 06:38 PM | #12 |
Lowes or Home Depot may have a polishing kit that comes with different clay bars, i have polish plexi before. just wet sand with light grit sand paper and use the red clay bar and a buff wheel should knock it out.
|
|
09-24-2012, 06:56 PM | #13 |
Drives: 2012 Black 2SS Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 117
|
Ask the guys at CAI how to get a new one. There was a recent thread about someone's intake and how the glass became unglued from the inside of the lid and fell onto the filter. They sent him a new one so I'm sure it's possible if it bothers you that much.
__________________
2012 Chevrolet Camaro 2SS Black | RS Package | Hurst Short Throw Shifter | Sunroof | Polished Wheels Pfadt Tri-Y Headers | Solo Mach X Catback | C.A.I. Intake | Vmax | Apex Intake Scoop & Washer Tank | Tuning by Mike Norris Polished OEM Strut Brace | Black Front Bowtie | C6 Flags Rear Emblem | Black Tail Light Bezels | Window Tint | Stealth Turn Signal Bulbs Ghosted Black LED Sidemarkers | Plasma LED DRL | DRL Harness | ABL LED Dome Light | LED Trunk & License Plate Lights |
09-24-2012, 08:32 PM | #14 |
Drives: 2013 2SS Join Date: Aug 2012
Location: Salt Lake City, UT
Posts: 372
|
Thanks for feeling my pain you guys haha. It actually was worse before the picture, that was after I had rubbed a compound on it. I'll for sure send Bill@ CAI an email once I track him down on here.
Lots of good advice though.
__________________
|
|
|
|
|