Alpine PDX M12 *1,200 watt Amp*FOR SALE - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tonyG · 01-29-2014, 02:23 PM

***FOR SALE*****
I have an Alpine PDX M12 amp for sale. Hardly used, I had it in my old car which was hardly driven for about a year. Its been in my closet since then and I have no need for it anymore (i like the sound of horsepower better)

1,200 watts rms @ 2-4 ohms

Im asking 425.00 OBO.
Name: IMG_0228.jpg
Views: 599
Size: 108.6 KB

Name: IMG_0228.jpg
Views: 599
Size: 108.6 KB

Name: IMG_0229.jpg
Views: 483
Size: 171.5 KB

Name: IMG_0230.jpg
Views: 518
Size: 142.5 KB

more info from alpine

Features and Specification

SPECIFICATIONS

CEA-2006 Power Ratings
CEA-2006 Power Rating: (4/2 I? @14.4V Ƈ%THD+N), S/N 92dBA, ref:1W into 4 I?) 1200W x 1
RMS Power Ratings
Per channel into 4 Ohms: (@14.4V Ƈ%THD+N) 1200W x 1
Per channel into 2 Ohms: (@14.4V Ƈ%THD+N) 1200W x 1
Sound Tuning
Crossover Frequency (LPF): Variable, 50Hz - 400Hz (-24dB / oct), (Variable, L.P.F Only 1/2 ch)
Subsonic Filter: OFF / 15Hz / 30Hz
Dimensions
Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2''
General
Power Requirements: 14.4V DC (11V to 16V)
Input Sensitivity (RCA Input): Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker)
Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ohms)
Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 4 or 1 I?
Frequency Response (+0, -1dB: 1W into 4 Ohms) for CH-1/2/3/4: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 92 dBA
FEATURES

Install
Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals)
Terminal Layout: One-Sided
Mounting Design: Easy Stacking and Clean-look intallation
General
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Thermal Protection:
Low-battery Protection:
Power Supply: Resonant Mode Power Supply
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: STAR Ciruit
Current Protection: Auto Over-Current Protection
Power Indicator: Top Mounted Blue LED Power/Status Indicator
RCA Output: Non-Fading Pre-Amp Output
Crossover: Adjustable Low-Pass
Pre-Amp Stage: Discrete
Final Outputs: MOSFET
Board Design: 6-Layer Glass Epoxy PC Board
Gain Control: Adjustable
Bass Control: Remote Bass Control (Sold Separately)

01-29-2014, 02:23 PM	#1
tonyG Drives: 2011 2SS/RS Join Date: Sep 2013 Location: Kentucky Posts: 171 View My Garage	*Alpine PDX M12 1,200 watt AmpFOR SALE* *FOR SALE*** I have an Alpine PDX M12 amp for sale. Hardly used, I had it in my old car which was hardly driven for about a year. Its been in my closet since then and I have no need for it anymore (i like the sound of horsepower better) 1,200 watts rms @ 2-4 ohms Im asking 425.00 OBO. more info from alpine Features and Specification SPECIFICATIONS CEA-2006 Power Ratings CEA-2006 Power Rating: (4/2 I? @14.4V Ƈ%THD+N), S/N 92dBA, ref:1W into 4 I?) 1200W x 1 RMS Power Ratings Per channel into 4 Ohms: (@14.4V Ƈ%THD+N) 1200W x 1 Per channel into 2 Ohms: (@14.4V Ƈ%THD+N) 1200W x 1 Sound Tuning Crossover Frequency (LPF): Variable, 50Hz - 400Hz (-24dB / oct), (Variable, L.P.F Only 1/2 ch) Subsonic Filter: OFF / 15Hz / 30Hz Dimensions Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2'' General Power Requirements: 14.4V DC (11V to 16V) Input Sensitivity (RCA Input): Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power) Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker) Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ohms) Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 4 or 1 I? Frequency Response (+0, -1dB: 1W into 4 Ohms) for CH-1/2/3/4: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 92 dBA FEATURES Install Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals) Terminal Layout: One-Sided Mounting Design: Easy Stacking and Clean-look intallation General Amplifier Type: Class-D (Digital) Channel Design: 1 Channel (Mono) Thermal Protection: Low-battery Protection: Power Supply: Resonant Mode Power Supply Power Supply Design: DC-DC PWM Power Supply Board Circuitry: STAR Ciruit Current Protection: Auto Over-Current Protection Power Indicator: Top Mounted Blue LED Power/Status Indicator RCA Output: Non-Fading Pre-Amp Output Crossover: Adjustable Low-Pass Pre-Amp Stage: Discrete Final Outputs: MOSFET Board Design: 6-Layer Glass Epoxy PC Board Gain Control: Adjustable Bass Control: Remote Bass Control (Sold Separately)