modded ls9 long block and all supporting accesories - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ace32x · 04-22-2014, 12:23 AM

currently have my ls9 in my 2009 zr1. looking to sell the long block as a whole including heat ex coolant pump all accories etc.

What is done to it currently
Lunati custom ground cam (will pm specs to serious inquires)
advanced induction cnc ported stock heads
lunati dual valve springs on stock valves
Ported blower case with nitrous outlet spray bars installed
Ported lpe snout
Ported 90mm throttle body
2.35 and 2.6 upper pulley and stock
LPE/ati 14% lower OD crank pulley and stock crank pulley
Katech heat exchanger and stock unit
stock zr1 coolant pump for supercharger coolant system and coolant tanks
obviously the long block itself and all included accesories
FRC 850cc injectors will be left in for who ever is looking to purchase.
Will also include stock clutch with the car which will hold blower only but will probably slip under spray.

as it sits the car made 693/690 on 91 octane. and 930/900 on a 200 shot. Looking to change directions with the car and figure it will be easier to sell the set up as a whole to some one swapping into another car or an older hot rod potentially

Looking to get 25,000 for it as it sits. motor has 14,xxx miles total and about 1500 with the mods.

Feel free to pm or email me at morris.malone@live.com with any questions

376LS3 · 04-22-2014, 01:02 AM

Isnt this the car that CPR built? You have a lot of the same parts as one of their builds.

ace32x · 04-22-2014, 01:37 AM

It is indeed that's my zr1 they did. Getting ready to change the set up to suit the mile and half mile events a little better. Joe does awesome work over there. He will be pulling it back out when some one is ready to pull the trigger on this set up.

376LS3 · 04-22-2014, 01:57 AM

Ya man! That car is bad ass to the fullest! I stopped by and saw it when it was there. Joe is the best. Would never let any other local shop touch my car. Good luck with sale. Cant wait to see what Joe has in store for the next round on this car!

ace32x · 04-22-2014, 11:01 AM

Quote:

Originally Posted by 376LS3

Ya man! That car is bad ass to the fullest! I stopped by and saw it when it was there. Joe is the best. Would never let any other local shop touch my car. Good luck with sale. Cant wait to see what Joe has in store for the next round on this car!

itl be fun ;D

infernometallicSS · 04-22-2014, 10:02 PM

God your car is sweet Morris. Can't wait to see what's next. Hopefully it'll be lambo killer.

ace32x · 04-23-2014, 11:38 AM

ttt

04-22-2014, 12:23 AM	#1
ace32x Drives: 2013 ZL1 Join Date: Oct 2012 Location: puyallup Posts: 543	modded ls9 long block and all supporting accesories currently have my ls9 in my 2009 zr1. looking to sell the long block as a whole including heat ex coolant pump all accories etc. What is done to it currently Lunati custom ground cam (will pm specs to serious inquires) advanced induction cnc ported stock heads lunati dual valve springs on stock valves Ported blower case with nitrous outlet spray bars installed Ported lpe snout Ported 90mm throttle body 2.35 and 2.6 upper pulley and stock LPE/ati 14% lower OD crank pulley and stock crank pulley Katech heat exchanger and stock unit stock zr1 coolant pump for supercharger coolant system and coolant tanks obviously the long block itself and all included accesories FRC 850cc injectors will be left in for who ever is looking to purchase. Will also include stock clutch with the car which will hold blower only but will probably slip under spray. as it sits the car made 693/690 on 91 octane. and 930/900 on a 200 shot. Looking to change directions with the car and figure it will be easier to sell the set up as a whole to some one swapping into another car or an older hot rod potentially Looking to get 25,000 for it as it sits. motor has 14,xxx miles total and about 1500 with the mods. Feel free to pm or email me at morris.malone@live.com with any questions __________________ C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car

04-22-2014, 01:02 AM	#2
376LS3 Eh, that'll happen Drives: 2010 2SS Join Date: Apr 2012 Location: Mesa, Arizona Posts: 1,841	Isnt this the car that CPR built? You have a lot of the same parts as one of their builds. __________________ 2010 Camaro SS LS3 - No Modz

04-22-2014, 01:37 AM	#3
ace32x Drives: 2013 ZL1 Join Date: Oct 2012 Location: puyallup Posts: 543	It is indeed that's my zr1 they did. Getting ready to change the set up to suit the mile and half mile events a little better. Joe does awesome work over there. He will be pulling it back out when some one is ready to pull the trigger on this set up. __________________ C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car

04-22-2014, 01:57 AM	#4
376LS3 Eh, that'll happen Drives: 2010 2SS Join Date: Apr 2012 Location: Mesa, Arizona Posts: 1,841	Ya man! That car is bad ass to the fullest! I stopped by and saw it when it was there. Joe is the best. Would never let any other local shop touch my car. Good luck with sale. Cant wait to see what Joe has in store for the next round on this car! __________________ 2010 Camaro SS LS3 - No Modz

04-22-2014, 10:02 PM	#6
infernometallicSS Drives: 2012 Camaro SS Best Run - 10.93@125 Join Date: Feb 2012 Location: San Tan Valley, Arizona Posts: 515 View My Garage	God your car is sweet Morris. Can't wait to see what's next. Hopefully it'll be lambo killer. __________________

04-23-2014, 11:38 AM	#7
ace32x Drives: 2013 ZL1 Join Date: Oct 2012 Location: puyallup Posts: 543	ttt __________________ C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car