10-22-2012, 09:11 AM | #1 |
Drives: 2013 Camaro ZL1 Join Date: Oct 2012
Location: Texas
Posts: 21
|
ZL1 OEM Wheel Locks..help
Went to the dealer and asked for wheel locks for a 2013 ZL1. They provided part number 92221880. These didn't look right after putting one on as the seat is way to narrow IMO. Very obvious when comparing to the original lug. side-by-side. Headed back to the parts counter and they agreed however their data showed it to be the correct one. I would like to use the OEM version versus Gorilla's brand, anyone have a correct part number or does Chevy even manufacture a wheel lock set for the ZL1 ?. It would be nuts if they didn't....
|
10-22-2012, 09:25 AM | #2 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
use an aftermarket set of lugs from Gorilla or McGard. They also have just the locks if you want to go that route. With Gorilla lugs every lug is a lock.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
10-22-2012, 09:35 AM | #3 |
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,047
|
I had a set of black Gorilla's on my 2011 Vert, and I now use a set of chrome Gorilla locks on my 2013 ZL1 Vert.
One reason I went with the Gorilla locks, is that the GM locks only provide one per wheel, making them look out of place on the wheel. For $50, Gorilla locks come 20 to a set, making all the lug nuts on the wheel the same. |
10-22-2012, 09:54 AM | #4 |
Drives: 2013 Camaro ZL1 Join Date: Oct 2012
Location: Texas
Posts: 21
|
Which Gorilla part number did you use for the chrome?
|
10-22-2012, 04:25 PM | #5 |
Drives: Camaro Join Date: Mar 2012
Location: Québec, Canada
Posts: 59
|
|
10-22-2012, 07:27 PM | #6 |
Drives: 2013 Camaro ZL1 Join Date: Oct 2012
Location: Texas
Posts: 21
|
Thx gs-63...
|
10-22-2012, 10:38 PM | #7 |
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,047
|
Product Quantity Unit price Subtotal Code: GOR96643C 1 $74.95 $74.95 |
10-24-2012, 03:20 AM | #8 | |
Drives: 2013 red ZL1 Join Date: Oct 2012
Location: Danville IN
Posts: 21
|
Quote:
|
|
10-24-2012, 06:58 AM | #9 |
Drives: 13 ZL1 1091, 04 Ram 2500, 12 CX9 Join Date: Jul 2012
Location: Lancaster, PA
Posts: 559
|
I know this is a stupid question, but are the cones color coded like on the factory lug nuts, blue 110 and silver 140? And if not, what should they be torqued to? I definitely don't want to damage anything by over or under tightening. Thanks a lot.
|
|
|
Thread Tools | |
|
|