Do 5th Gens Come with Headers? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Destinationlunar · 09-05-2011, 07:40 AM

Hello Everyone

Just got my a new 2SS 5th gen so I figured joining a forum would be a good idea. I have a few questions for you guys cuz I can not find the answers on google. Figured this is the perfect place to ask them.

I got my new camaro with 3500 Miles on it so it was used. Now this being said here is why I bought it over a new one.

It has an aftermarket Hurst Shifter, SLP full exhaust with hi flow cats on it. It also has a BBK cold air intake. Now why I bring this up is yesterday I looked closer at the engine. It has headers on it. I know that in the past GM has used exhaust Manifolds. Did the 2010's come with headers or are those aftermarket too>? Figured someone on here would know. or all of you lmao..

Thanks for the info.

McBeevee · 09-05-2011, 07:41 AM

No....no tubular header from the factory. Stock would have been iron manifolds.

Destinationlunar · 09-05-2011, 07:42 AM

Quote:

Originally Posted by Never Satisfied

No....no tubular header from the factory

Wow nice thats good so something else that was put on im gonna have to figure out who made them then. Thanks

McBeevee · 09-05-2011, 07:44 AM

Are they shorties or long tubes?

Destinationlunar · 09-05-2011, 07:50 AM

Quote:

Originally Posted by Never Satisfied

Are they shorties or long tubes?

Shorties

Matster · 09-05-2011, 07:57 AM

Quote:

Originally Posted by Destinationlunar

Shorties

If you look under the car just behind the front wheel can you see a joint where four tubes come together into one. If so, you have long tube headers.

Matster · 09-05-2011, 07:59 AM

Shorties

Long Tubes
Name: Long tubes.jpg
Views: 867
Size: 5.7 KB

Destinationlunar · 09-05-2011, 08:00 AM

Quote:

Originally Posted by Matster

Shorties
Attachment 283866

Long Tubes
Attachment 283867

Like i said above there shorties

Aries240SS · 09-05-2011, 08:09 AM

the good news about shorties is that there is normally a plate on the #3 primary tube that says which company made them.

The Stig · 09-05-2011, 08:38 AM

You may want to check if the car has a tune or not, because of she does you don't have a powertrain warranty.

IBM · 09-05-2011, 08:39 AM

Quote:

Originally Posted by stieger

You may want to check if the car has a tune or not, because of she does you don't have a powertrain warranty.

Was going to say this. And congrats on the car OP!

rberns · 09-05-2011, 09:16 AM

What is the difference between the shorties and long tubes. Besides the obvious lenth of them...Is there a difference between the performance and sound over the other

The Stig · 09-05-2011, 10:07 AM

LTs give you much more rwhp and a deeper/louder sound.

Destinationlunar · 09-05-2011, 10:27 AM

Quote:

Originally Posted by stieger

You may want to check if the car has a tune or not, because of she does you don't have a powertrain warranty.

Yea with the power train GM certified with a list of parts as is sold. The car not only has a power train GM put another 12000 mile bumper to bumper on it. I made sure that it was covered before i left with it and have paperwork on it so they cant go back on it lmao. Not sure if it has a tune but they have to cover it now cuz they certified it and gave me the paperwork for it. Kinda nice

09-05-2011, 07:40 AM	#1
Destinationlunar Drives: 2010 2SS Jewel Red Join Date: Sep 2011 Location: Batavia, IL Posts: 16	Do 5th Gens Come with Headers? Hello Everyone Just got my a new 2SS 5th gen so I figured joining a forum would be a good idea. I have a few questions for you guys cuz I can not find the answers on google. Figured this is the perfect place to ask them. I got my new camaro with 3500 Miles on it so it was used. Now this being said here is why I bought it over a new one. It has an aftermarket Hurst Shifter, SLP full exhaust with hi flow cats on it. It also has a BBK cold air intake. Now why I bring this up is yesterday I looked closer at the engine. It has headers on it. I know that in the past GM has used exhaust Manifolds. Did the 2010's come with headers or are those aftermarket too>? Figured someone on here would know. or all of you lmao.. Thanks for the info.

09-05-2011, 07:41 AM	#2
McBeevee 220/221 whatever it takes Drives: See sig.... Join Date: Jun 2010 Location: Lafayette In Posts: 1,132	No....no tubular header from the factory. Stock would have been iron manifolds. __________________ Brent 2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd

09-05-2011, 07:44 AM	#4
McBeevee 220/221 whatever it takes Drives: See sig.... Join Date: Jun 2010 Location: Lafayette In Posts: 1,132	Are they shorties or long tubes? __________________ Brent 2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd

09-05-2011, 07:59 AM	#7
Matster Drives: 2010 2SS/RS IOM/IOM #3625 Join Date: Jun 2008 Location: Greater Toronto Area Posts: 1,902 View My Garage	Shorties Long Tubes __________________ 666 EVIL RWHP BUILT AND TUNED BY SHIFTED PERCEPTIONS INC.(SPi) 416 Forged Stroker, E-Force Supercharger, Blower Cam, Rotofab CAI, Stainless Works 2" LT Headers and 3" Exhaust, LPE ZR1 Twin Disc Clutch, DSS 1400 HP Axles, Pfadt Performance Kit Stage 3.

09-05-2011, 08:38 AM	#10
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	You may want to check if the car has a tune or not, because of she does you don't have a powertrain warranty. __________________

09-05-2011, 08:09 AM	#9
Aries240SS Drives: 2011 1SS RS Camaro, 1995 LSX 240SX Join Date: Mar 2011 Location: Austin, TX Posts: 461	the good news about shorties is that there is normally a plate on the #3 primary tube that says which company made them.

09-05-2011, 09:16 AM	#12
rberns Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011 Location: US Posts: 3,291 View My Garage	What is the difference between the shorties and long tubes. Besides the obvious lenth of them...Is there a difference between the performance and sound over the other __________________ 2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan, Holley fuel rail, Proform valve covers, relocated coil packs

09-05-2011, 10:07 AM	#13
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	LTs give you much more rwhp and a deeper/louder sound. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My review on OBX headers	sfgiantsfan9	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	37	01-13-2011 03:12 PM
Are the 4th gens going to loose value w/ the 5th gens coming out?	andyrew	4th Generation Camaros	39	04-13-2010 04:13 AM
Modern Muscle Exhaust and Intake Special	modern-muscle	V8 Bolt-Ons & Tunes	1	01-20-2010 06:46 PM
How many 5th gens at Indy?	Ctrain24	5th Gen Camaro SS LS LT General Discussions	32	07-31-2008 07:56 AM