Old school fender emblems - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GearheadSS · 04-12-2010, 07:17 PM

I want to put old school emblems on my car. I love the 1st gen "Camaro" script and old school SS on the fender. I want to do it like this.

Which emblems are being used to do this? Classic Industries and NPD sell a Camaro script emblem with tape backing but it looks like it's just a flat piece of metal and doesn't have the rounded lines of the original.

I haven't seen any of the smaller SS fender emblems that don't have the studs on them for the 1st gen cars. I want someting with a tape back for adhesion.

Sir Nuke · 04-13-2010, 06:26 AM

What a lot of us have done is buy the fender emblems that have th posts and remove them, then using 3M doublesided molding tape, put them on where you like. There have been a lot of us that have done this pu put fender badges, header badges, and even badges on the dash. It works like a champ.

Rockin the BlueSS · 06-24-2010, 02:35 PM

instead of making a new thread i thought i bring this one back around... anyone know if any of the vendors have started making the camaro script badges that don't need the pegs cut off to install and with adhesive backing?

i thought i saw them a while ago but cant find them anywhere....

Sir Nuke · 06-24-2010, 04:11 PM

The only ones I have been able to find are the "stock" repoductions....and they all have teh posts. It would be a nice if you find any.

2010 2-Tone · 06-24-2010, 04:12 PM

Quote:

Originally Posted by Sir Nuke

The only ones I have been able to find are the "stock" repoductions....and they all have teh posts. It would be a nice if you find any.

It is nothing to grind those off. It took all of 2 minutes for both sides.

Rockin the BlueSS · 06-24-2010, 04:37 PM

Quote:

Originally Posted by 2010 2-Tone

It is nothing to grind those off. It took all of 2 minutes for both sides.

true it wouldn't take much to cut them off but i am also looking for a flat emblem not the old ones that are raised quite a bit... i have a waterjet and can cut them out myself but the design is a little hard to copy... and the available font are not even close...

Sir Nuke · 06-24-2010, 05:55 PM

Quote:

Originally Posted by 2010 2-Tone

It is nothing to grind those off. It took all of 2 minutes for both sides.

well I know, because that is what I did MONTHS ago......but I bet a lot of people would like it if they didn't have to mod their badges, thats all.

dragonZ28 · 06-24-2010, 06:02 PM

Quote:

Originally Posted by Rockin the BlueSS

instead of making a new thread i thought i bring this one back around... anyone know if any of the vendors have started making the camaro script badges that don't need the pegs cut off to install and with adhesive backing?

i thought i saw them a while ago but cant find them anywhere....

We just got them GM approved to make. Waiting for addition to our contract, then we can sell them.
Stainless mirror
Stainless brushed
Composite colors

Thanks, Roger

ac223mal · 06-24-2010, 06:23 PM

Quote:

Originally Posted by dragonZ28

We just got them GM approved to make. Waiting for addition to our contract, then we can sell them.
Stainless mirror
Stainless brushed
Composite colors

Thanks, Roger

Are you able to post pictures?

I have a set that I cut the posts off, painted, and put 3M tape on, but I was never happy with the job I did of trimming the tape, so they are still sitting in the garage.

dragonZ28 · 06-24-2010, 06:27 PM

Quote:

Originally Posted by ac223mal

Are you able to post pictures?

I have a set that I cut the posts off, painted, and put 3M tape on, but I was never happy with the job I did of trimming the tape, so they are still sitting in the garage.

I do have pictures, and will post them tomorrow. We laser cut the tape so it matches the piece exactly. No gaps or voids.
All we need to do is get the contract changed, because we recently had about 6 more items approved. So until I get that all back here we have to wait to sell, but they said OK.
I will post pictures tomorrow.

Thanks, Roger

ac223mal · 06-25-2010, 04:56 AM

fixxer56 · 06-25-2010, 07:40 AM

Rogers work usually is worth the wait

Sir Nuke · 06-25-2010, 09:09 AM

Quote:

Originally Posted by fixxer56

Rogers work usually is worth the wait

This is a fact......it will be top notch.

dragonZ28 · 06-25-2010, 11:53 AM

New pieces.

Camaro script mirror stainless, also will be available in brushed finish.

Camaro script black acrylic, but will come in colors

Thanks, Roger

04-12-2010, 07:17 PM	#1
GearheadSS Drives: 23 LT1/22 Colorado TB/69 Chevelle Join Date: Jun 2006 Location: Greenville, Tx Posts: 4,970 View My Garage	Old school fender emblems I want to put old school emblems on my car. I love the 1st gen "Camaro" script and old school SS on the fender. I want to do it like this. Which emblems are being used to do this? Classic Industries and NPD sell a Camaro script emblem with tape backing but it looks like it's just a flat piece of metal and doesn't have the rounded lines of the original. I haven't seen any of the smaller SS fender emblems that don't have the studs on them for the 1st gen cars. I want someting with a tape back for adhesion.

04-13-2010, 06:26 AM	#2
Sir Nuke Master of All Things Drives: '20 Corvette Stingray Join Date: Jul 2009 Location: Southeast of Houston, Texas Posts: 22,335 View My Garage	What a lot of us have done is buy the fender emblems that have th posts and remove them, then using 3M doublesided molding tape, put them on where you like. There have been a lot of us that have done this pu put fender badges, header badges, and even badges on the dash. It works like a champ. __________________

06-24-2010, 02:35 PM	#3
Rockin the BlueSS The New Guy Drives: 2010 2SS/RS IBM M6 Join Date: Sep 2009 Location: Cali Posts: 1,147	instead of making a new thread i thought i bring this one back around... anyone know if any of the vendors have started making the camaro script badges that don't need the pegs cut off to install and with adhesive backing? i thought i saw them a while ago but cant find them anywhere.... __________________ Wiper Reservoir Relocation Thread

06-24-2010, 04:11 PM	#4
Sir Nuke Master of All Things Drives: '20 Corvette Stingray Join Date: Jul 2009 Location: Southeast of Houston, Texas Posts: 22,335 View My Garage	The only ones I have been able to find are the "stock" repoductions....and they all have teh posts. It would be a nice if you find any. __________________

06-25-2010, 07:40 AM	#12
fixxer56 Thin Blue Line Drives: ABM 2LT/RS #10094 Join Date: Oct 2008 Location: SE Pa Posts: 1,386 View My Garage	Rogers work usually is worth the wait __________________ One of the "Few Blue"

06-25-2010, 04:56 AM	#11
ac223mal Drives: car Join Date: Nov 2008 Location: location Posts: 571 View My Garage

06-25-2010, 11:53 AM	#14
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,428	New pieces. Camaro script mirror stainless, also will be available in brushed finish. Camaro script black acrylic, but will come in colors Thanks, Roger

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Formal High-perfomance Education?	Dan3	General Automotive + Other Cars Discussion	11	06-08-2020 01:52 PM
Lets see your Old School Emblems	Not Paid 4	5th Gen Camaro SS LS LT General Discussions	19	04-09-2010 05:14 AM