Front splitter extention soon! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OVERPAR73 · 10-06-2016, 07:27 PM

Do you have an idea on the price yet? I will keep my eye on this thread! I have recommend your jack pads to all my Gen 5 Camaro buddies, take care.

brokencilence · 10-06-2016, 08:46 PM

Hey, how about you throw the aero sport concepts logo on it since it's practically identical to their splitter

olblue75 · 10-06-2016, 10:24 PM

Would this work on a 1LE splitter with a belly pan installed?

urr2slo · 10-06-2016, 10:26 PM

That's identical to the Aero Sports Concepts piece. Looks like you just bought one of his and copied it.

SumWhite1LE · 10-06-2016, 10:45 PM

Quote:

Originally Posted by brokencilence

Hey, how about you throw the aero sport concepts logo on it since it's practically identical to their splitter

Mic drop!!!

VR Baron · 10-06-2016, 11:12 PM

Quote:

Originally Posted by urr2slo

That's identical to the Aero Sports Concepts piece. Looks like you just bought one of his and copied it.

Yeah sure does

VR Baron · 10-06-2016, 11:13 PM

Quote:

Originally Posted by SumWhite1LE

Mic drop!!!

Skylane765 · 10-07-2016, 10:40 AM

Quote:

Originally Posted by NW Sam

That looks great and i like the way it attaches. How can I order one? Thanks, Sam.

They are in stock ready to ship, made of HDPE very tough and has a mat finish both sides.

Skylane765 · 10-07-2016, 10:41 AM

Quote:

Originally Posted by urr2slo

That's identical to the Aero Sports Concepts piece. Looks like you just bought one of his and copied it.

No I made it from a ZL1 Yesterday we had in the shop. WE made plenty of them and they are ready to ship. I never have seen the other extention until we looked at the struts that the ZL1 owner showed us. We were asked to make the extension by the ZL1 owner.

Skylane765 · 10-07-2016, 10:42 AM

Quote:

Originally Posted by olblue75

Would this work on a 1LE splitter with a belly pan installed?

We are making one for the 1LE, just need some one to come by to make a template for a free extension. we are in San Diego.

Skylane765 · 10-07-2016, 10:45 AM

Quote:

Originally Posted by urr2slo

That's identical to the Aero Sports Concepts piece. Looks like you just bought one of his and copied it.

No reason to, our are a less cost than theirs. Ours are not the same as the other guys, ours have a split section unlike the others out there.

Thor142 · 10-07-2016, 10:52 AM

Quote:

Originally Posted by urr2slo

That's identical to the Aero Sports Concepts piece. Looks like you just bought one of his and copied it.

Engineers prefer the term benchmarking

It's done all the time.

MaroSS · 10-07-2016, 11:28 AM

I specifically asked for this type of splitter and it was created to my taste. I don't own an AeroSport Concept splitter and haven't seen one in person.

With this splitter, you shouldn't need the rods, the rods will be for pure aesthetic purposes.

mrshanes · 10-07-2016, 11:32 AM

Can't tell from the pics, but does it have to come off in order to take the belly pan off? That would be a huge pain every time you have to change the oil.
Thanks

10-06-2016, 07:27 PM	#15
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,471 View My Garage	Do you have an idea on the price yet? I will keep my eye on this thread! I have recommend your jack pads to all my Gen 5 Camaro buddies, take care. __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

10-06-2016, 08:46 PM	#16
brokencilence Drives: '14 1LE, Z28.R Join Date: Apr 2014 Location: PA Posts: 308	Hey, how about you throw the aero sport concepts logo on it since it's practically identical to their splitter __________________ Far beyond stock....

10-06-2016, 10:24 PM	#17
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	Would this work on a 1LE splitter with a belly pan installed? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

10-06-2016, 10:26 PM	#18
urr2slo Drives: 2010 2ss ss/rs abm, 2016 2ss/rs hbm Join Date: Feb 2009 Location: N. Phx, Az Posts: 1,332	That's identical to the Aero Sports Concepts piece. Looks like you just bought one of his and copied it. __________________ URR2SLO - If you're not going fast enough, get out the way......

10-07-2016, 11:28 AM	#27
MaroSS ZL1 Drives: 10' SS/RS - Sold; 15' White ZL1 Join Date: May 2009 Location: Harbor City, CA Posts: 683 View My Garage	Not an AeroSport Splitter Copy I specifically asked for this type of splitter and it was created to my taste. I don't own an AeroSport Concept splitter and haven't seen one in person. With this splitter, you shouldn't need the rods, the rods will be for pure aesthetic purposes. Attached Images __________________

10-07-2016, 11:32 AM	#28
mrshanes Drives: 2014 Camaro ZL1 Join Date: Jun 2014 Location: Morgantown, WV Posts: 63	Can't tell from the pics, but does it have to come off in order to take the belly pan off? That would be a huge pain every time you have to change the oil. Thanks