Officially in the Wild '15 #631 in Broken Arrow OK - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

The_Raging_Bull · 03-07-2016, 02:41 PM

I'm now a full member of the Z/28 section with the delivery of my '15 Z/28 on Saturday; transported by Galena Logistics from Iowa for about 1.00/mile. They did a great job; moving the car in a 3 car racing trailer.

The wife and I tooled around and got a few stares, basically from guys who though they were looking at a V6 camaro only to realize the car said Z/28 on the side. One Billy Bob took his hat off

, the toothpick from this mouth and started doing looks up and down the car - too funny.

When I filled it up; I drew a small crowd of onlookers too.

Has anyone put "427" emblems on their hood?? Just curious, as my Z06 came that way -> and I've gotten dozen of replies from the curious on them as well. Just curious, as this car is staying bone stock as long as there is a warranty (84 months 70000 miles) - so in case there is an issue with my LS7 Chevy can pick up the tab to fix it. The valve guide concentricity issue is supposed to be fixed now according to Hib Halverson's article.

Stephen12ZL1 · 03-07-2016, 03:00 PM

like this: His screen name is "4 FN 27"

URBAN LEGEND · 03-07-2016, 03:30 PM

Welcome!

Crushinator · 03-07-2016, 05:32 PM

Welcome and congrats!

Robbie1227 · 03-07-2016, 05:41 PM

Congrats and yes, I added the 427 emblems on my hood, 6" from the back edge.
Same spot my ZL1 had them located.
I went with red to match the Z28 emblem
I would attach a photo if I knew how to from my iPad, lol

TonyNDeb · 03-07-2016, 06:14 PM

I put the emblems on my hood as well. I went with black, more of a subtle look.

69L48Z27 · 03-07-2016, 06:16 PM

Yes, 427 emblems here.

JUSTIFIED · 03-07-2016, 06:34 PM

Welcome! I didn't put 427 emblems on the hood, but i do have a license plate bracket with "427" on it. Most people are only going to see the rear end - right? Talking like Billy Badass. :-). May have to consider emblems on the hood... that would be cool.

Crushinator · 03-07-2016, 06:40 PM

I put the 427 emblems on mine, along with the hood spears. Do yourself a favor. Don't buy the cheapo $20 emblems on ebay. They're complete garbage. Spend the money and get the good ones.

Crushinator · 03-07-2016, 06:42 PM

Here's another one a little closer.

XTREMZ · 03-07-2016, 07:24 PM

Welcome! Enjoy your Z.

Robbie1227 · 03-07-2016, 07:42 PM

I got my emblems on Amazon, and they aren't perfect like the factory GM emblems.
Where do you buy the high quality ones, I can try and remove and reinstall better ones

Robbie1227 · 03-07-2016, 07:44 PM

Ha! I did it!
I attached a photo from my iPad...too bad it's sideways , lol
Here's another

Robbie1227 · 03-07-2016, 07:45 PM

, still sideways!!

03-07-2016, 02:41 PM	#1
The_Raging_Bull Raging Bull Reborn Drives: '09 CGM Z063LZ '15 RH Z/28 #0631 Join Date: Mar 2012 Location: Broken Arrow OK Posts: 765 View My Garage	Officially in the Wild '15 #631 in Broken Arrow OK I'm now a full member of the Z/28 section with the delivery of my '15 Z/28 on Saturday; transported by Galena Logistics from Iowa for about 1.00/mile. They did a great job; moving the car in a 3 car racing trailer. The wife and I tooled around and got a few stares, basically from guys who though they were looking at a V6 camaro only to realize the car said Z/28 on the side. One Billy Bob took his hat off , the toothpick from this mouth and started doing looks up and down the car - too funny. When I filled it up; I drew a small crowd of onlookers too. Has anyone put "427" emblems on their hood?? Just curious, as my Z06 came that way -> and I've gotten dozen of replies from the curious on them as well. Just curious, as this car is staying bone stock as long as there is a warranty (84 months 70000 miles) - so in case there is an issue with my LS7 Chevy can pick up the tab to fix it. The valve guide concentricity issue is supposed to be fixed now according to Hib Halverson's article. __________________ Toy 1 '15 RH Z/28 w/AC & Radio S/N 0631 Toy 2 '09 CGM Z06 3LZ My DD: '17 Ford Mustang GT Her DD: '14 F150 Ecoboost 3.5 Last edited by The_Raging_Bull; 03-07-2016 at 04:03 PM.

03-07-2016, 03:00 PM	#2
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	like this: His screen name is "4 FN 27" Attached Images __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

03-07-2016, 03:30 PM	#3
URBAN LEGEND Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013 Location: Brenham, TX Posts: 3,517	Welcome! __________________ 🔺22 RS E TRON GT 🔺21 Model S Plaid

03-07-2016, 05:32 PM	#4
Crushinator Drives: '15 Z/28 #783 Join Date: Aug 2015 Location: PA Posts: 456 View My Garage	Welcome and congrats! __________________ 2015 Z/28 A/C and audio

03-07-2016, 05:41 PM	#5
Robbie1227 Drives: 2015 Camaro Z28/2016 Jeep Sahara Join Date: Mar 2010 Location: South Florida Posts: 544	Congrats and yes, I added the 427 emblems on my hood, 6" from the back edge. Same spot my ZL1 had them located. I went with red to match the Z28 emblem I would attach a photo if I knew how to from my iPad, lol __________________ 2015 summit white Z28 #120 TRK DAY -Sun-Tek PPF-C protection film on 2/3 of the car, Moreno Camber plates, American Racing 2" ceramic coated LT headers and X-pipes with No Cats, Taylor red performance wires, NGK plugs, BTR Stage III Cam, MSD Atomic intake, Nick Williams 102mm throttle body, Stage 2 CNC Ported Heads by WCCH, MGW short throw shifter, oil catch can, and a dyno tune to get me to 587 RWHP and 516 RWTQ GONE: 2013 Summit White Camaro ZL1 M6 Roto-Fab CAI, Kooks headers and CAT delete, ATI damper and 10% pulley and balancer! Results: 576 RWHP - 540 RWTQ

03-07-2016, 06:14 PM	#6
TonyNDeb Drives: Candy Join Date: Aug 2014 Location: Cleveland, NY Posts: 324	I put the emblems on my hood as well. I went with black, more of a subtle look.

03-07-2016, 06:16 PM	#7
69L48Z27 Drives: 2015 Z/28; 1969 Camaro SS Join Date: Nov 2015 Location: York, PA Posts: 805	Yes, 427 emblems here.

03-07-2016, 06:34 PM	#8
JUSTIFIED Drives: 2015 black Z/28 Join Date: Nov 2015 Location: Texas Posts: 1,077	Welcome! I didn't put 427 emblems on the hood, but i do have a license plate bracket with "427" on it. Most people are only going to see the rear end - right? Talking like Billy Badass. :-). May have to consider emblems on the hood... that would be cool. __________________

03-07-2016, 06:40 PM	#9
Crushinator Drives: '15 Z/28 #783 Join Date: Aug 2015 Location: PA Posts: 456 View My Garage	I put the 427 emblems on mine, along with the hood spears. Do yourself a favor. Don't buy the cheapo $20 emblems on ebay. They're complete garbage. Spend the money and get the good ones. Attached Images __________________ 2015 Z/28 A/C and audio

03-07-2016, 06:42 PM	#10
Crushinator Drives: '15 Z/28 #783 Join Date: Aug 2015 Location: PA Posts: 456 View My Garage	Here's another one a little closer. Attached Images

03-07-2016, 07:24 PM	#11
XTREMZ Drives: 2015 Z/28 #891 Join Date: Mar 2016 Location: Metrowest Boston Posts: 77 View My Garage	Welcome! Enjoy your Z.

03-07-2016, 07:42 PM	#12
Robbie1227 Drives: 2015 Camaro Z28/2016 Jeep Sahara Join Date: Mar 2010 Location: South Florida Posts: 544	I got my emblems on Amazon, and they aren't perfect like the factory GM emblems. Where do you buy the high quality ones, I can try and remove and reinstall better ones Attached Images __________________ 2015 summit white Z28 #120 TRK DAY -Sun-Tek PPF-C protection film on 2/3 of the car, Moreno Camber plates, American Racing 2" ceramic coated LT headers and X-pipes with No Cats, Taylor red performance wires, NGK plugs, BTR Stage III Cam, MSD Atomic intake, Nick Williams 102mm throttle body, Stage 2 CNC Ported Heads by WCCH, MGW short throw shifter, oil catch can, and a dyno tune to get me to 587 RWHP and 516 RWTQ GONE: 2013 Summit White Camaro ZL1 M6 Roto-Fab CAI, Kooks headers and CAT delete, ATI damper and 10% pulley and balancer! Results: 576 RWHP - 540 RWTQ

03-07-2016, 07:44 PM	#13
Robbie1227 Drives: 2015 Camaro Z28/2016 Jeep Sahara Join Date: Mar 2010 Location: South Florida Posts: 544	Ha! I did it! I attached a photo from my iPad...too bad it's sideways , lol Here's another Attached Images __________________ 2015 summit white Z28 #120 TRK DAY -Sun-Tek PPF-C protection film on 2/3 of the car, Moreno Camber plates, American Racing 2" ceramic coated LT headers and X-pipes with No Cats, Taylor red performance wires, NGK plugs, BTR Stage III Cam, MSD Atomic intake, Nick Williams 102mm throttle body, Stage 2 CNC Ported Heads by WCCH, MGW short throw shifter, oil catch can, and a dyno tune to get me to 587 RWHP and 516 RWTQ GONE: 2013 Summit White Camaro ZL1 M6 Roto-Fab CAI, Kooks headers and CAT delete, ATI damper and 10% pulley and balancer! Results: 576 RWHP - 540 RWTQ

03-07-2016, 07:45 PM	#14
Robbie1227 Drives: 2015 Camaro Z28/2016 Jeep Sahara Join Date: Mar 2010 Location: South Florida Posts: 544	, still sideways!! __________________ 2015 summit white Z28 #120 TRK DAY -Sun-Tek PPF-C protection film on 2/3 of the car, Moreno Camber plates, American Racing 2" ceramic coated LT headers and X-pipes with No Cats, Taylor red performance wires, NGK plugs, BTR Stage III Cam, MSD Atomic intake, Nick Williams 102mm throttle body, Stage 2 CNC Ported Heads by WCCH, MGW short throw shifter, oil catch can, and a dyno tune to get me to 587 RWHP and 516 RWTQ GONE: 2013 Summit White Camaro ZL1 M6 Roto-Fab CAI, Kooks headers and CAT delete, ATI damper and 10% pulley and balancer! Results: 576 RWHP - 540 RWTQ