FREE wheel offsets!

[SUX2BU]

Originally Posted by Sickwitit

I ordered wheels from Asanti/Lexani brand Kinesis K118 22" 9 front 10 rear, I wanted 11" but the seller said he'd recommend 10",
Carbon Fiber face outlined in gloss black, gloss black power coating lips Satin barrels...Satin black power coated rivets inside and out(Bolts)....all cleared...!
Step up for larger lips 3 and 5" for my 2010 2SS with HR sport springs.......here is what their sending me,
Fronts...Center Bore=67.1 Offset=30
Rears....Center Bore=72.56 Offset=35
I wont them to fit perfect in regards to Break clearance and that they don't stick and or do fill up the wheel wells........
I would like to run 265x35x22 and 305x30x22 tires what do you guys think?
I'm 2 weeks into the order and was told they would be ready to ship in 4 weeks...!
Thanks.
Regards
Rob

Those offsets should put the wheels exactly where mine are in regards to being flush with the fender. Should fit great! I can't comment on the brake clearance though.

[Sickwitit]

Originally Posted by SUX2BU

Those offsets should put the wheels exactly where mine are in regards to being flush with the fender. Should fit great! I can't comment on the brake clearance though.

Thank you very much....!

[grocerygetter]

so you have done more work than anyone I've read, independently.
So...a 20x10" rim, +35 offset with a 305 would ride on a pfadt dropped car (springs). Will that same wheel work out front though and maybe run 295/35s all around so I could rotate?

[Nessal]

Originally Posted by SUX2BU

Offsets mean nothing with out knowing the width of the wheel. remember offset is how far off the middle the mounting pad is, if you don't know the width, you don't know the middle. People used to use backspacing instead of offset, I don't know why they switched, backspacing is easier for people to understand.

I was talking about the general run of the mill 9" front and 10-11" rear.

[SUX2BU]

Originally Posted by grocerygetter

so you have done more work than anyone I've read, independently.
So...a 20x10" rim, +35 offset with a 305 would ride on a pfadt dropped car (springs). Will that same wheel work out front though and maybe run 295/35s all around so I could rotate?

The rear would be perfect, the front "should" fit. At least from all the measurements I took.

Originally Posted by Nessal

I was talking about the general run of the mill 9" front and 10-11" rear.

Sorry my mind reading skills weren't working that good, lol.

[Nessal]

Originally Posted by SUX2BU

The rear would be perfect, the front "should" fit. At least from all the measurements I took.

Sorry my mind reading skills weren't working that good, lol.

haha all good. I should have stated what I was referring to. I believe someone said that they were running Forgestars 20X9, 20X10.5 with 25/35 offset or something. Can't remember the exact number. But it looks to be about right from some of the information that is posted here.

[Sickwitit]

Originally Posted by SUX2BU

Those offsets should put the wheels exactly where mine are in regards to being flush with the fender. Should fit great! I can't comment on the brake clearance though.

One more question if you don't mine...I'm about to order tires I would like to run 305/30/22 and 265/30/22 I'm dropped with HR sport springs on my 2SS, or should I run the 295/30/22 and 265/30/22...? would i have any rubbing issues...my wheel dealer says I should be fine with either...what do you think?
What brand would you guy's recommend in these sizes?
Thanks again for all the help you give to all concern here...!
Regards,
Rob

[SUX2BU]

Originally Posted by Sickwitit

One more question if you don't mine...I'm about to order tires I would like to run 305/30/22 and 265/30/22 I'm dropped with HR sport springs on my 2SS, or should I run the 295/30/22 and 265/30/22...? would i have any rubbing issues...my wheel dealer says I should be fine with either...what do you think?
What brand would you guy's recommend in these sizes?
Thanks again for all the help you give to all concern here...!
Regards,
Rob

To be honest I don't have much experience with 22" tires so I can't tell you if they will rub. Those rear tires are huge at over 29" tall.

[Sickwitit]

Originally Posted by SUX2BU

To be honest I don't have much experience with 22" tires so I can't tell you if they will rub. Those rear tires are huge at over 29" tall.

Ok thanks.

[Buford]

I'm desperately looking for a 18 x 9.5 rim that will clear my 2010 CTS-V brakes... anyone have input?

[SUX2BU]

Originally Posted by Buford

I'm desperately looking for a 18 x 9.5 rim that will clear my 2010 CTS-V brakes... anyone have input?

Forgestar or TWS

[grocerygetter]

test fitting 20x10, +35mm offset with nt05 275/40 all around this week. fingers crossed. wanted something I could rotate. If these don't work, I have what I will get Tony to order ready to go. LOL

[SUX2BU]

Originally Posted by grocerygetter

test fitting 20x10, +35mm offset with nt05 275/40 all around this week. fingers crossed. wanted something I could rotate. If these don't work, I have what I will get Tony to order ready to go. LOL

It should be close but still clear, let me know how it works. Post lots of pics!

I ordered 4 18x10 with 38mm offset from Tony. I can't wait for them to get here! I still don't know what tire to run, I'm thinking either 274/40, 285/40 or 295/35. So I'm really interested in seeing your 275/40 on 20x10. What wheels are they?

[Jason@JacFab]

I'm looking at the Drag Wheels DR-37, it comes in either an 18x8, or 18x8.5 in either a 40mm offset, or 15mm offset.

http://www.discounttiredirect.com/di...8.5&vid=016070

In your opinion, do you think these would work, and clear the SS brakes? According to DTD is says they will fit the 2010 SS, but I don't know that I necessarily trust their website.