You are browsing camaro5 
 |
|
01-28-2013, 08:53 AM
|
#1 |
|
Account Suspended
Drives: 2010 2SS/RS Join Date: Jan 2013
Location: Texas
Posts: 1,050
|
L99 VVT delete list
I'm gathering up all the parts that I need for my cam swap on my l99.i have the list of parts that I have and want to know if I'm missing anything before i tear it apart... I only bought parts separate cause I had some already.heres what I have
Ls3 valley cover Ls3 timing cover Cam sensor harness Ls7 cam sprocket Ls2 timing dampener Ls7 lifters Head gaskets Head bolts If I'm missing something I would appreciate the info .thanks |
|
|
|
01-28-2013, 11:05 AM
|
#2 |
           
|
Don't forget a cam...just sayin
__________________
 |
|
|
|
|
01-28-2013, 11:24 AM
|
#3 |
Drives: 2016 2SS coupe 2015 3LT Stingray Join Date: Aug 2012
Location: El paso texas
Posts: 880
|
I would recommend the oil pump but there is mixed opinions about it and dont forget gaskets and front seal
|
|
|
|
|
01-28-2013, 12:58 PM
|
#4 |
|
Master ASE, GM, LSX Tech.
Drives: 2010 Camaro SS Join Date: Oct 2012
Location: Austin, TX
Posts: 1,034
|
There is a O-ring between the oil pump and pick up that needs to be replaced. Also the center valley cover has 8 O-rings on the bottom side. The gasket for the valley cover is different between the L99 and LS3.
I went with ARP bolts on my LS3 conversion. You will need a new crank bolt and 3 cam bolts. Last edited by LSX Camaro; 01-28-2013 at 02:15 PM. |
|
|
|
|
01-28-2013, 01:04 PM
|
#5 |
|
Account Suspended
Drives: 2010 2SS/RS Join Date: Jan 2013
Location: Texas
Posts: 1,050
|
Oh yes I already have the tap 231/236 cam on the way.
Glad I'm not missing much thanks guys |
|
|
|
|
01-28-2013, 01:13 PM
|
#6 |
 
Drives: 2011 Camaro 2SS/RS M6 Hurst RJT Join Date: Apr 2011
Location: New Mexico
Posts: 117
|
Lifter trays, as they are also different from the L99 that has afm lifters
|
|
|
|
|
01-28-2013, 10:42 PM
|
#7 |
|
Account Suspended
Drives: 2010 2SS/RS Join Date: Jan 2013
Location: Texas
Posts: 1,050
|
Ok good to know thx
|
|
|
|
|
01-29-2013, 10:08 AM
|
#8 |
|
Drives: Camaro Join Date: Apr 2009
Location: Texas
Posts: 1,669
|
Hate to see you removing VVT! U sure you dont wanna just swap back out to the VVT3 and keep that VVT?
Jason |
|
|
|
|
01-29-2013, 12:22 PM
|
#9 | |
 
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
We sell this in Kit form everything you need one Stop shopping. http://jreperformanceparts.com/gm/20...n-package.html
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
|
|
|
|
|
|
 |
|
|
