06-23-2017, 11:21 AM | #1 |
|
Rear Hub Replacement - spring?
Bf has a 2014 1LE. He needs to replace the rear hub. We were watching a video for a V6 and there's a spring that should be replaced when replacing the hub. I went through the assembly on GMPartsDirect and there's no spring in the parts list. We can't find video or step by step instructions for the 1LE. Can someone confirm there's no spring?
__________________
|
06-23-2017, 11:46 AM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
I believe there's a washer that has to be replaced.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-23-2017, 12:23 PM | #3 |
|
Axel nut.
Here's the diagram. I don't see a spring in this or any diagrams. Wanna be sure we have what we need before we take this thing apart. Anybody replaced a rear hub yet?
__________________
|
06-23-2017, 01:53 PM | #4 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
Washer and nut should be replaced. Otherwise you just need a puller.
|
06-23-2017, 02:38 PM | #5 |
|
Got that. Thanks
__________________
|
06-23-2017, 02:55 PM | #6 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
This may help:
http://www.camaro5.com/forums/showth...385577&page=44 http://www.camaro5.com/forums/showth...385577&page=45 -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|