12-02-2013, 11:38 PM | #1 |
|
Dealership badge removal
How do I remove this badge safely? EDIT: PS: Mods - sorry for posting in the wrong section I just realized there is a cosmetic section
__________________
2013 VR Camaro 2SS/RS LS3
Small, but effective mod list: Roto-Fab Intake, TSP 2" Long tubes, TSP catless mids, MSD spark plug wires, stock catback, Elite Catch Can, APEX washer relocation and scoop, VMAX throttle body, Diablo InTune-Tuned by Matt@FSP, and a JacFab license plate bracket. |
12-02-2013, 11:46 PM | #2 |
Heat it up for a few seconds with a blow-dryer, then use fishing line to peel it off.
|
|
12-03-2013, 12:31 AM | #3 |
Drives: 2012 1SS LS3 M6 black on black :) Join Date: May 2012
Location: SD
Posts: 1,342
|
+1 and if there is any glue left use some goo gone.
__________________
2006 - 46,000 Reliable miles
|
12-03-2013, 01:33 AM | #4 |
Drives: Black 2011 2SS/RS Join Date: May 2011
Location: S. Texas
Posts: 1,817
|
Hey Pluto if you in or near Corpus Christi check out our thread in the Texas section. Its called Calling all CC muscle cars or something like that. We also usually hang out at the A&W on Saratoga every Saturday night.
|
12-03-2013, 05:16 AM | #5 |
+1 - goo gone works great
__________________
|
|
12-03-2013, 07:04 AM | #6 |
Drives: 2004 Honda Civic+2011 Camaro 2SS Join Date: Sep 2013
Location: South Vienna OH
Posts: 396
|
tarminator by stoner works the best but it can be harder to find. O'reilly carries it
|
12-03-2013, 10:44 AM | #7 |
Hair dryer, nice and even, not too long and Goo Gone. I took off a sticker about 3x5 this way. It took about 15 minutes and no problem. Good luck!
__________________
|
|
12-03-2013, 11:11 AM | #8 |
Drives: 2014 Camaro 1LT/RS Join Date: Sep 2013
Location: Arizona
Posts: 1,693
|
Sir, clean your car! I can see dirt!
__________________
Detailing is an involuntary obsession.
|
12-03-2013, 12:52 PM | #9 |
|
I was waiting for that...it's ridiculously dirty on the exterior I haven't been able to wash it for over 2 months because of the bi polar weather around here
__________________
2013 VR Camaro 2SS/RS LS3
Small, but effective mod list: Roto-Fab Intake, TSP 2" Long tubes, TSP catless mids, MSD spark plug wires, stock catback, Elite Catch Can, APEX washer relocation and scoop, VMAX throttle body, Diablo InTune-Tuned by Matt@FSP, and a JacFab license plate bracket. |
12-04-2013, 08:04 AM | #10 |
Drives: 2014 2SS 1LE Join Date: Sep 2013
Location: Twin Cities
Posts: 621
|
3m also makes a adhesive removal spray I used it on G8 it works very well! As for removal I heated them up then moved fishing line behind the badges in a sawing motion and it worked like a charm!
__________________
14 2SS RS 1LE Recaro NPP Pat G cam and tune, Trick flow heads Long tube headers catless
|
12-04-2013, 08:22 AM | #11 |
|
You could spray the top of the badge with WD 40 and letting it soak in.
|
|
|
|
|