04-08-2014, 09:58 AM | #1 |
603 Camaros
Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012
Location: Manchester, NH
Posts: 6,779
|
NEC5 Help Desk?!?
Will this setup work without spacers.
20x9 Front and Rear with 245/45/20 all the way around. I'm thinking i may need wheel spacers for this any help is appreciated.
__________________
MY 2017 I4 CAMARO BUILD JOURNAL | YOUTUBE | INSTAGRAM | 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE | 12.693s @ 105MPH 1/4 Mile |
04-08-2014, 10:36 AM | #2 |
Boosted
Drives: 2012 1LT RS... with snails Join Date: May 2012
Location: New Hampshire
Posts: 1,455
|
So you're going to stick the skinnier tire on the fatter rim ( RS rear rims 20X9 come with a 275/40. I know for a fact that the 20X9 with a 275/40 will fit on the front with no rubbing.
__________________
IPS Twin Turbos, Corsa Exhaust, Ported Throttle Body. 461 rwhp 443 rwtq!! *Cameron Hass.ani* |
04-08-2014, 12:14 PM | #3 | |
603 Camaros
Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012
Location: Manchester, NH
Posts: 6,779
|
Quote:
That's where my problem may begin i have this setup sitting in my garage and think i may need spacers.
__________________
MY 2017 I4 CAMARO BUILD JOURNAL | YOUTUBE | INSTAGRAM | 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE | 12.693s @ 105MPH 1/4 Mile |
|
04-08-2014, 01:23 PM | #4 |
Happy_Dan
|
I'm confused. What will the spacer do? I would be more concerned with how the tire fits on the rim. Should fit on the car fine. The spacer would move it away from the hub. I don't think you need that.
|
04-08-2014, 01:58 PM | #5 |
Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
they will fit - post in the tire section if still confused.
Heard many stories of shops putting the rear wheels/tires up front by accident. My wheel widths are 19X10.5 with 285/35/19 tire and 18X11 315/30/18 tire for the fronts... the 40mm offset for the rear spacing should be fine in the front. |
04-08-2014, 03:22 PM | #6 |
603 Camaros
Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012
Location: Manchester, NH
Posts: 6,779
|
Just put them on not much of a huge difference between the stock 18's and the 20's i was worried about it rubbing aganst the shocks. On a pissing me off chevy note the driver side pinch weld and passenger side welds are in different locations so now i have a bent rocker panel on the underside atleast but wtf GM why make your decisions in life even more confusing for us then you already have.
__________________
MY 2017 I4 CAMARO BUILD JOURNAL | YOUTUBE | INSTAGRAM | 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE | 12.693s @ 105MPH 1/4 Mile |
04-08-2014, 05:01 PM | #7 |
Boosted
Drives: 2012 1LT RS... with snails Join Date: May 2012
Location: New Hampshire
Posts: 1,455
|
The dealer put my rear 275s on the front before I had no issues other than the sheer stupidity
__________________
IPS Twin Turbos, Corsa Exhaust, Ported Throttle Body. 461 rwhp 443 rwtq!! *Cameron Hass.ani* |
04-08-2014, 06:52 PM | #8 |
Drives: 2014 1LS M6 Supercharged Join Date: Feb 2011
Location: New Britain, Ct
Posts: 937
|
The only time you might need spacers is if you switch to the SS Brakes
|
04-08-2014, 09:06 PM | #9 |
603 Camaros
Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012
Location: Manchester, NH
Posts: 6,779
|
Ya i doubt i'll ever do that i actually have more space there between the calipers and wheel with the new setup then i did with the old heritage rims. Shocks are still a bit close to me but i'll check for any rub tomorrow and just order spacers to give it a little extra room if i need to. Did some spirited driving tonight and didn't hear or smell anything like rubber burning.
__________________
MY 2017 I4 CAMARO BUILD JOURNAL | YOUTUBE | INSTAGRAM | 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE | 12.693s @ 105MPH 1/4 Mile |
04-09-2014, 01:55 PM | #10 |
Boosted
Drives: 2012 1LT RS... with snails Join Date: May 2012
Location: New Hampshire
Posts: 1,455
|
There won't be any rubbing
__________________
IPS Twin Turbos, Corsa Exhaust, Ported Throttle Body. 461 rwhp 443 rwtq!! *Cameron Hass.ani* |
|
|