BatmannTexas' 2012 SS build [9/8/14] - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AdamA301 · 10-06-2014, 07:44 PM

awesome car! what did you do for a clutch?

Batmanntexas · 10-06-2014, 10:23 PM

Quote:

Originally Posted by AdamA301

awesome car! what did you do for a clutch?

@AdamA301 - Still running the stock clutch (for now). It's daily driven, so I don't beat on it to much, mostly get into it once the car is rolling. I just figure I'll drive it on the stock clutch until it gives up, then throw $1000 at it...haha

AdamA301 · 10-07-2014, 10:22 PM

wow thats crazy! i had no idea that the stock clutch could hold that much power! i just got an agp twin turbo kit for my 1LE and i thought that the stock clutch wouldn't hold the power...

atiprocharger · 10-23-2015, 02:39 PM

I have a similar build and have the stock clutch too so far. I try to not beat it up too much......

Batmanntexas · 08-13-2016, 09:03 PM

Well, it has been a while since I posted anything on my build journal, so I thought I'd bring it up to date. Not much has changed mechanically, yet. I have purchased some 95-lb injectors, Colorado Speed trunnion upgrade kit (bronze bushings instead of needle bearings), and some fueling components to upgrade the fuel system.

I finally pulled the trigger on some new wheels and tires. Jon @ BestWheel Deals made me a hell of a deal on a set of Rohana RF2 wheels, 20x9 and 20x11. I scored some all season Lexani LS-30 tires for a ridiculous low price as well, 275/40R20 and 315/35R20

Before:
Name: Before2.jpg
Views: 427
Size: 197.2 KB

Name: Before2.jpg
Views: 427
Size: 197.2 KB

After:

Batmanntexas · 06-23-2017, 12:34 PM

Time for some new parts. Recently ordered the following:

AGP Dual fuel pump setup (430lph pumps)
E85 Flex Fuel conversion kit
Custom blower cam
Colorado Speed rocker arm trunnion bushings
95-lb injectors

Hoping to crack the 750RWHP mark.....we'll see.
I should have everything in hand by the end of June, and I'm hoping to install it all around mid-July.

Updates to follow.

-Scott

Batmanntexas · 10-22-2017, 01:55 PM

Got the install done of all parts (fuel pumps, flex fuel, injectors, trunnion upgrade, and camshaft) a little later than I wanted, first week of August. Here are a few pics that I managed to capture.

Batmanntexas · 10-22-2017, 01:57 PM

Here is a video of the first start up, without a tune.

HERE.

Now, to get it tuned....

Batmanntexas · 10-22-2017, 01:58 PM

Off she goes!! She is going to get re-tuned for the new cam, injectors, and E85!

Batmanntexas · 10-22-2017, 02:00 PM

Preliminary results are in for 93 Octane.

745RWHP/634RWTQ @ 10 psi

Still waiting on the E85 numbers....

Taylortoons · 11-02-2017, 08:00 PM

What was your hp bump from the E85?

Batmanntexas · 11-02-2017, 09:13 PM

Quote:

Originally Posted by Taylortoons

What was your hp bump from the E85?

She put down 806/676 @ 10lbs on E85

-Scott

SFR7771 · 10-04-2021, 02:48 PM

Curious what Whipple are you using any part numbers?or do you have a parts list with number love the build. Thanks

Batmanntexas · 10-04-2021, 08:52 PM

I'm using Whipple's kit for the 2010 - 2015 Camaro. I have the packing list for the kit, just have to dig it out. Send me your email address and I'll get it to you. Here is the link to the Whipple kit I have.
http://https://whipplesuperchargers....&product_id=19

-Scott

10-23-2015, 02:39 PM	#116
atiprocharger Drives: Black 2018 Camaro ZL1 auto Join Date: Nov 2012 Location: Atlanta GA Posts: 282 View My Garage	I have a similar build and have the stock clutch too so far. I try to not beat it up too much...... __________________ 2018 ZL1 A10 with PTB, ROTOFAB, Pulley and tune from Vengeance. 607 rwhp/647 rwtq

08-13-2016, 09:03 PM	#117
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,374 View My Garage	New wheels and tires Well, it has been a while since I posted anything on my build journal, so I thought I'd bring it up to date. Not much has changed mechanically, yet. I have purchased some 95-lb injectors, Colorado Speed trunnion upgrade kit (bronze bushings instead of needle bearings), and some fueling components to upgrade the fuel system. I finally pulled the trigger on some new wheels and tires. Jon @ BestWheel Deals made me a hell of a deal on a set of Rohana RF2 wheels, 20x9 and 20x11. I scored some all season Lexani LS-30 tires for a ridiculous low price as well, 275/40R20 and 315/35R20 Before: After: __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14

06-23-2017, 12:34 PM	#118
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,374 View My Garage	Time for some new parts. Recently ordered the following: AGP Dual fuel pump setup (430lph pumps) E85 Flex Fuel conversion kit Custom blower cam Colorado Speed rocker arm trunnion bushings 95-lb injectors Hoping to crack the 750RWHP mark.....we'll see. I should have everything in hand by the end of June, and I'm hoping to install it all around mid-July. Updates to follow. -Scott __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14

10-22-2017, 01:55 PM	#119
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,374 View My Garage	Got the install done of all parts (fuel pumps, flex fuel, injectors, trunnion upgrade, and camshaft) a little later than I wanted, first week of August. Here are a few pics that I managed to capture. Attached Images __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14

10-22-2017, 01:57 PM	#120
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,374 View My Garage	Video of startup with new cam, pre-tune Here is a video of the first start up, without a tune. HERE. Now, to get it tuned.... __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14

10-06-2014, 07:44 PM	#113
AdamA301 Drives: white 1LE Join Date: Feb 2014 Location: corydon,IN Posts: 7	awesome car! what did you do for a clutch?

10-07-2014, 10:22 PM	#115
AdamA301 Drives: white 1LE Join Date: Feb 2014 Location: corydon,IN Posts: 7	wow thats crazy! i had no idea that the stock clutch could hold that much power! i just got an agp twin turbo kit for my 1LE and i thought that the stock clutch wouldn't hold the power...

10-22-2017, 01:58 PM	#121
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,374 View My Garage	Off to the Tuner!! Off she goes!! She is going to get re-tuned for the new cam, injectors, and E85! Attached Images __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14

10-22-2017, 02:00 PM	#122
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,374 View My Garage	Preliminary results are in for 93 Octane. 745RWHP/634RWTQ @ 10 psi Still waiting on the E85 numbers.... __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14 Last edited by Batmanntexas; 12-21-2018 at 05:58 PM.

11-02-2017, 08:00 PM	#123
Taylortoons Drives: 2011 2SS/RS LS3 Join Date: Apr 2017 Location: Dallas Posts: 482	What was your hp bump from the E85? __________________ GPI Built Procharger D-1/13 PSI/Race Intercooler/SS3 Cam Kit/Kooks LTH/X- pipe/FIC 1050/E85/3.91 gears/Centerforce Dual Disc clutch/Flowmaster Outlaw/775whp/680tqSOLD

10-04-2021, 02:48 PM	#125
SFR7771 Drag and Drive is Life Drives: 2010 Camaro 2SS RS A6 LS3 Whipple Join Date: Aug 2021 Location: TX Posts: 142 View My Garage	Curious what Whipple are you using any part numbers?or do you have a parts list with number love the build. Thanks __________________ My build link... https://www.camaro5.com/forums/showt...4#post11077544 2010 2SS/RS/ Mods, Whipple, 1000cc injector, 102MM TB, Innovation West 10% OD pulley set up 8 rib, AGP twin 450 fuel system w flex on E85, CAI K&N, LT with OR Cats aka no catalytic converters, Coils and wires, 3" exhaust with mufflers, Oil catch can, 2015 ZL1 9.9 3.23 ratio, BMR upper Lower control arms, 15"conversion, BMR Anti Roll Bar 315/60/15 ET street slicks 1972 El Camino SS 565BBC 950HP, All TRZ suspension Last edited by SFR7771; 10-04-2021 at 03:03 PM.

10-04-2021, 08:52 PM	#126
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,374 View My Garage	I'm using Whipple's kit for the 2010 - 2015 Camaro. I have the packing list for the kit, just have to dig it out. Send me your email address and I'll get it to you. Here is the link to the Whipple kit I have. http://https://whipplesuperchargers....&product_id=19 -Scott __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi COTW 9/8/14