I need a picture please (Blade spoiler mounting foam)

[blazerk5]

Could someone with a blade spoiler please post a couple of pictures. I need close ups of the front bottom edge so as to see the foam tape and gap. Also I need your gas strut part number.

Tim

[bhall82]

Just did a quick search.

http://www.camaro5.com/forums/showth...=blade+spoiler

[blazerk5]

I need close ups to show the foam on the GM 3 piece duckbill. The front edge view. Also the gm part number for the gas strut from the spoiler kit.
Mine still is not right from the dealer.

Tim

[VR Baron]

I would have to take a pic. When mounted you have the same gap it appears as the stocker, same rolled edge all. the foam comes up close to the leading edge. I couldn't roll the stripe under it much do to that. I can get the strut number but didnt notice any difference over stock

[Jcm]

Bag reads #c33L-bag-B. other # is (Lg). 137. 062811 .i don't know which you need. I to have the v.r. ,three piece dove tail ,gm spoiler. Pain in the ass to put the end pieces on, wasn't it! But it was worth it!

[VR Baron]

Originally Posted by blazerk5

Could someone with a blade spoiler please post a couple of pictures. I need close ups of the front bottom edge so as to see the foam tape and gap. Also I need your gas strut part number.

Tim

Here is a pic. I wrote down all the numbers on the strut in the order they appear top to bottom. Dont know which is the p/n though:

01006 0390n267/10 b8

500151

92235540

[blazerk5]

Thank you so much for the picture and numbers.

Tim

[rickyrocket]

blazerk5 tell me you didnt buy your car from Hurd,Ive been having issues w/mine also

[VR Baron]

Originally Posted by blazerk5

Thank you so much for the picture and numbers.

Tim

No prob, glad to help

[blazerk5]

VR Baron,

What stripes did you use on the spoiler?

Tim

[VR Baron]

Originally Posted by blazerk5

VR Baron,

What stripes did you use on the spoiler?

Tim

They are from camaro decal store.com. They are GM approved and are the same sheen, texture, plys and such as the ones the dealer puts on,in this case matte black.$39 gets 6 or 12" long pcs.The guy there gave me these and the type whos ends are like that on the trunk, but you dont see till the spoiler is off. They could have had the curved top angle end up a bit better, but its close.
May have been the first dovetail ever done with these stripes as he asked me alot of questions and emailed pics of what he did and to be sure it was what I wanted(makes them up to the design you want) Also will ask for measurements on your stripes(the width), right where the decklid stripes meet the spoiler, seems even gm's suppliers are not the same to eachother, and need to match up the new to the existing on the car so no miss matches.