Actual Canadian Cities! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KaotiK · 01-12-2012, 08:13 AM

Quote:

Originally Posted by ZL1nut

I'm getting mine through an Edmonton dealer. order#QBXKDP

Sweet! Nice to see a fellow Albertain. I'm in Grande Prairie, Ab. Was going to buy mine in Edmonton at Edmonton Motors, but I didn't get the greatest feeling from that dealership... Besides, it's nice to have a little loyalty to a dealership that I have already purchased many other GM products from.

LOWDOWN · 01-12-2012, 10:48 AM

Quote:

Originally Posted by KaotiK

Sweet! Nice to see a fellow Albertain. I'm in Grande Prairie, Ab. Was going to buy mine in Edmonton at Edmonton Motors, but I didn't get the greatest feeling from that dealership... Besides, it's nice to have a little loyalty to a dealership that I have already purchased many other GM products from.

I recall a co-worker, April '09, wanting a specific-colour G8 GT with the Summer Performance Tire package. GM-Canada had just announced $7500 Rebates (to equalize the price with the US!) and sales soared! As well, GM-Canada had distributed the G8s all by themselves...initial dealer orders for specific cars was not allowed.

The ONLY "suitable" Summer-tired G8 GT in ALL of CANADA? Yup...Grande Prairie AB...just about the most northern GM dealer in Canada...

FitterMike · 01-13-2012, 12:44 PM

Trying to buy one in Calgary but can't find a dealership that will sell me one.

2012ZL1 · 01-13-2012, 12:48 PM

I'm thinking no one in Canada is going to get a 2012? Maybe 2013's?

Pappa Joe · 01-13-2012, 01:19 PM

Quote:

Originally Posted by 2012ZL1

I'm thinking no one in Canada is going to get a 2012? Maybe 2013's?

I think we will be last ones for 2012.Mind you that will be a good thing,hopefully they will have the CF issue ironed out by then!

P.S. If I dont get a 2012...I wont be getting a ZL1!

2012ZL1 · 01-13-2012, 02:14 PM

how come?

Pappa Joe · 01-13-2012, 03:01 PM

Quote:

Originally Posted by 2012ZL1

how come?

I figure I have waited long enuff...plus when we gonna get car July,Aug?

2012ZL1 · 01-13-2012, 03:43 PM

probably August for Canada unless a couple escape before they all head south. I'd almost bet there won't be enough to go around up here this time around. I hope I'm wrong, but just a feeling..

tpower · 01-13-2012, 03:46 PM

Quote:

probably August for Canada unless a couple escape before they all head south. I'd almost bet there won't be enough to go around up here this time around. I hope I'm wrong, but just a feeling..

Man I hope your wrong , My dealer tells me March or April but I am unsure about that

KaotiK · 01-13-2012, 06:13 PM

Quote:

Originally Posted by 2012ZL1

probably August for Canada unless a couple escape before they all head south. I'd almost bet there won't be enough to go around up here this time around. I hope I'm wrong, but just a feeling..

Seems late

Quote:

Originally Posted by tpower

Man I hope your wrong , My dealer tells me March or April but I am unsure about that

Im hearing the same thing, but expecting between late April or most likely May. Pure speculation and hopes of course!

Pappa Joe · 01-13-2012, 07:51 PM

Quote:

Originally Posted by KaotiK

Seems late

Im hearing the same thing, but expecting between late April or most likely May. Pure speculation and hopes of course!

April ,May is kool....Aug not.....

2012ZL1 · 01-13-2012, 07:59 PM

I hope I'm wrong too...but I wouldn't bet on it....

KaotiK · 01-13-2012, 10:18 PM

Quote:

Originally Posted by Pappa Joe

April ,May is kool....Aug not.....

couldn't agree with you more

2012ZL1 · 01-14-2012, 03:40 PM

I sure hope you guys are right....

01-13-2012, 12:48 PM	#18
2012ZL1 CaRaHoLiC Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011 Location: B.C. Canada Posts: 1,701	I'm thinking no one in Canada is going to get a 2012? Maybe 2013's? __________________ 2012 ZL1 2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me.

01-13-2012, 02:14 PM	#20
2012ZL1 CaRaHoLiC Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011 Location: B.C. Canada Posts: 1,701	how come? __________________ 2012 ZL1 2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me.

01-13-2012, 03:43 PM	#22
2012ZL1 CaRaHoLiC Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011 Location: B.C. Canada Posts: 1,701	probably August for Canada unless a couple escape before they all head south. I'd almost bet there won't be enough to go around up here this time around. I hope I'm wrong, but just a feeling.. __________________ 2012 ZL1 2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me.

01-13-2012, 07:59 PM	#26
2012ZL1 CaRaHoLiC Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011 Location: B.C. Canada Posts: 1,701	I hope I'm wrong too...but I wouldn't bet on it.... __________________ 2012 ZL1 2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me.

01-14-2012, 03:40 PM	#28
2012ZL1 CaRaHoLiC Drives: '12 ZL1,67 Cam,68 Biscayne 427 4 sp Join Date: Aug 2011 Location: B.C. Canada Posts: 1,701	I sure hope you guys are right.... __________________ 2012 ZL1 2.55 upper, 10" lower pullies, Innovators west billet hub and sfi balancer, solid blower drive isolator, 50 mm idler kit, full length S/S headers no cats, comp cams custom grind cam, comp roller rocker trunion kit, comp push rods,dual valve springs retainers and locks, Injector dynamics ID850 inectors, Rotofab ZL1 cold air kit, Lingenfelter 160 thermostat, Rotofab intercooler reservoir, stock plugs, LS7 90mm throttle body, GTO clutch reservoir mod, my own custom catch can, Tuning by Jannetty, install by me.

01-13-2012, 12:44 PM	#17
FitterMike Drives: Camaro Join Date: Nov 2011 Location: Alberta Posts: 385	Trying to buy one in Calgary but can't find a dealership that will sell me one.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Canadian cost vs American cost	Thrillz	Canada	25	04-01-2010 12:11 AM
US Aux Gauges For Canadian Metric Car	sjspat	Interior Parts & Accessories	4	03-25-2010 02:54 PM
Pre Production Canadian order tracking available	2010 SS RS	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	5	02-25-2010 05:00 PM
canadian pricing sucks	born-to-fish-	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	53	01-23-2010 01:30 PM
New Canadian Vendor	ACS Composite	Canada	8	01-16-2010 10:19 PM