12-03-2021, 10:01 PM | #1 |
Drives: Synergy Camaro, Escape Join Date: Feb 2010
Location: Michigan
Posts: 368
|
Another stainless works/power post
Long story short I have stainless power catted headers with the three inch performance connectors, instead of the stock connectors. Anybody else in here running these into a 2.5 inch cat-back? And how?
__________________
|
12-04-2021, 01:01 AM | #2 |
Drives: 2013 Chevy Camaro ZL1 Join Date: Feb 2021
Location: South Florida
Posts: 43
|
Exhaust 3" to 2.5" reducer
|
12-04-2021, 02:14 AM | #3 |
It don’t come easy.
|
^^^this
The reducer is right after the cats.
__________________
|
12-04-2021, 07:28 AM | #4 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 826
|
The reducers come with the kit if you order the right one.
Sent from my Pixel 5 using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
12-04-2021, 08:46 AM | #5 |
Tri-County Camaro SWFL
|
If you bought the system used i believe Vibrant makes this part as well
__________________
|
12-04-2021, 09:04 AM | #6 |
Drives: Synergy Camaro, Escape Join Date: Feb 2010
Location: Michigan
Posts: 368
|
I wasn’t aware they had two different versions and the vendor didn’t tell me or ask. So I ended up with the 3 in connection pipe. I’m assuming the reducer slips onto the back end of the 3 inch cat to the 2.5 exhaust pipe? Any certain length I would need?
__________________
|
12-04-2021, 09:17 AM | #7 |
It don’t come easy.
|
Correct. I believe it is a standardized size on the length. I’m guessing if you order from Stainless it will be one size.
__________________
|
12-04-2021, 09:22 AM | #8 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 826
|
I actually have a pair if you need them.
Sent from my Pixel 5 using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
12-04-2021, 09:52 AM | #9 |
Drives: Synergy Camaro, Escape Join Date: Feb 2010
Location: Michigan
Posts: 368
|
Send me a pm when you get a chance please.
__________________
|
12-04-2021, 07:20 PM | #10 |
|
|
12-04-2021, 07:53 PM | #11 |
Tri-County Camaro SWFL
|
I'm fairly certain you can get a set off of Vibrant Performance
__________________
|
12-04-2021, 07:59 PM | #12 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 826
|
I got them with my headers originally.
Sent from my Pixel 5 using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
12-05-2021, 08:46 AM | #13 |
Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021
Location: NY
Posts: 1,264
|
Call Stainless works, If you don't get the pair above they are good people to deal with. The Headers are the same they just ship out a different adapter depending on the kit you order. I wasn't sure at first and I called them and they explained the differences.
__________________
GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir
GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount. |
12-05-2021, 08:49 AM | #14 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,449
|
This, I got mine with my headers when we ordered them. Stainless Power/Stainless Works.. If you don't get the ones Larry has...
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|