11-03-2009, 04:40 AM | #43 |
BTW, here is the same set of wheels but in a color matched blue them on a Lexus. I can only imagine how they look on your car. Wish I could have gone and did a shoot on it. :(
|
|
11-06-2009, 06:43 PM | #44 |
Drives: 2010 CGM SS/RS COTW 7/5/2010 Join Date: Oct 2008
Location: Salinas, ca
Posts: 1,817
|
any pics of these on the cam yet? i was looking for your car in the parking around sema
|
11-07-2009, 05:19 PM | #45 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
Not at this time, We had a small problem on the rears so i did not put them on, but by the end of next week may be and i was inside at booth 21206 in the QTP booth there are pics of it at SEMA.
|
10-28-2010, 04:18 PM | #46 |
o come on
Drives: 06 GTO Join Date: Nov 2008
Location: Naples FL
Posts: 437
|
A very good friend on mine has a set of Breed wheels. He did not have any trouble with them. I went with him to pick the wheels up since he is just across the state and the owner is a great guy and has nothing to do with forged 360. The wheels look great and get tons of looks and lots of attention. Can't wait to see your on the Camaro.
So pics of my buddies wheels (also the car featured on the web site)
__________________
06 GTO with three pedals like it should be
|
10-28-2010, 07:33 PM | #47 |
Drives: 2010 Camaro 1SS Join Date: Aug 2009
Location: Lawton/Fort Sill, OK
Posts: 1,632
|
So how much do their wheels cost?
__________________
2010 Camaro 1SS Inferno Orange Magnusson Supercharger Installed and Tuned by ADM Performance, Roto Fab CAI IOM painted, MBRP Cat Back Exhaust, Barton Industries Short Shifter, Clear Image Headers, Pedders coilovers, BMR Front/Rear sway bars Trailing Arms and End Links, VMax ported TB
|
10-28-2010, 07:36 PM | #48 |
|
I like the plain, centerlines look myself.
|
10-28-2010, 10:53 PM | #49 | |
|
Quote:
But Breed is 360 forged...same company. Check the addresses: 13651 sw 143rd Ct Unit #104 Miami, FL 33186 I was just there beginning of the week and they make some awesome wheels there! Got my Concave 5's there |
|
10-29-2010, 02:32 PM | #50 |
o come on
Drives: 06 GTO Join Date: Nov 2008
Location: Naples FL
Posts: 437
|
They do use the same guy/company to cut the wheels as Forged 360 but the owner of Breed itself is not the same.
__________________
06 GTO with three pedals like it should be
|
10-29-2010, 02:42 PM | #51 |
Drives: 2010 2SS IOM L99 Join Date: Jan 2010
Location: LOUISVILLE,KY..
Posts: 7,545
|
those should look great on your car.
|
10-29-2010, 03:25 PM | #52 |
Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008
Location: Houston, TX
Posts: 3,849
|
This thread is a year old! No pics of the original poster's car with the wheels?
__________________
Fquick.com/NineBall
|
10-29-2010, 03:33 PM | #53 |
Go Blue!!!!!
Drives: 2012 Cruze LT Join Date: Mar 2009
Location: Indiana
Posts: 23,290
|
|
10-29-2010, 03:40 PM | #54 | |
Rolling along...
|
Quote:
__________________
|
|
10-29-2010, 08:34 PM | #55 |
o come on
Drives: 06 GTO Join Date: Nov 2008
Location: Naples FL
Posts: 437
|
Shoot I didn't even see that it was a year old. I just saw the day and month lined up and didn't look at the year. Plus I didn't really read everything
__________________
06 GTO with three pedals like it should be
|
10-30-2010, 12:34 AM | #56 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
There was 2 problems, That i have with the rimes First was the offset on the rears, I want to keep the tires inside the wheel well, But the guy that made them wanted to give me a larger lip, Needles to say that was not going to work, Unless i put on some wheel well extenders.( it was stinking out 1" past the quarter panel, But my tire is under the quarter panel )
As soon a i looked at the rims i see the next problem, TPS mounting, I am runing a 10.5 X20 up front and the placement for the TPS hits the spindle, So i need new outer barrels for the front, I have tried all kinds of valves and all hit the spindle. But i no longer work with them and his old suppler, We had a falling out, No mater what i told him he did not believe what i said, We replaced the rear inner and outer barrels, But he did not want to do the fronts, The way that i wanted to fix the fronts. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
VIP Forged Wheels For Sale | EVS Motors Inc. | Wheels / Tires | 45 | 01-19-2010 05:13 PM |
Wheels! Your Camaro needs forged wheels. | Nine Ball | Wheels / Tires | 42 | 12-21-2009 10:51 AM |
Anyone in FL replace their wheels? | FunkyELF | USA - Southeast | 1 | 07-29-2009 05:44 PM |