Lashway looking for a stock 2010 Camaro for part testing - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Erik@lashway · 12-08-2010, 11:04 PM

We have some new products for the LS3/L99 that we need to test on a dyno. You will be provided before and after dyno graphs as well as the option to purchase parts at cost. All labor is covered as well as time and travel. Vehicle needs to be stock, or lightly modded (basic bolt ons, ie CAI/Exhaust)

Please PM me for details.

Thanks,
Erik@Lashway

fldrummer · 12-09-2010, 10:12 AM

Darn! Too bad you didn't come on here looking a year ago. I could have been your tester then; I'm probably too modified by now... Oh well, where's tour shop located, by the way?

fldrummer · 12-09-2010, 10:32 AM

Nevermind; I found it on your website. However, your initial description says you're east of I-95, but you're actually west--might want to correct that.

Erik@lashway · 12-09-2010, 11:32 PM

Sending a PM...

And yes, our website has some flaws. Another reason why we canned our web guy!

Thanks for the heads up.

Erik@Lashway

---COME ON!!! WE NEED A 2010

swansor · 12-10-2010, 01:04 PM

I have an L99 with CAI and MBRP exhaust.

Erik@lashway · 12-13-2010, 07:29 AM

pm sent...

The Stig · 12-13-2010, 07:59 AM

So only a 2010? No 2011?

Erik@lashway · 12-15-2010, 11:49 AM

anything with L92s....2011 is fine!

baranowski · 12-15-2010, 11:59 AM

2010 1 ss manual in daytona.

Erik@lashway · 12-15-2010, 12:01 PM

Whats your availbility?

Erik@lashway · 12-30-2010, 06:18 AM

All PMs returned

12-08-2010, 11:04 PM	#1
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Lashway looking for a stock 2010 Camaro for part testing We have some new products for the LS3/L99 that we need to test on a dyno. You will be provided before and after dyno graphs as well as the option to purchase parts at cost. All labor is covered as well as time and travel. Vehicle needs to be stock, or lightly modded (basic bolt ons, ie CAI/Exhaust) Please PM me for details. Thanks, Erik@Lashway

12-09-2010, 10:12 AM	#2
fldrummer "Black Ace" Drives: Supercharged 2010 SS, 2016 Golf R Join Date: Aug 2008 Location: Ft. Lauderdale, FL Posts: 1,352	Darn! Too bad you didn't come on here looking a year ago. I could have been your tester then; I'm probably too modified by now... Oh well, where's tour shop located, by the way? __________________ 2010 2SS/RS M6 "Black Ace" - Delivered 6/4/2009 Mods: Forged 416 LS3, Maggie TVS 2300 SC (~11 psi), custom cam (232/247, .630/.630, 118 LSA), 90-lb. injectors, ZL1 fuel pump & ADM controller, Alky Control meth kit, Monster LT1-SC twin-disk clutch, ZL1 drivetrain conversion w/ DSS 1000-HP axles & 1-pc. driveshaft, CAI Inc. intake w/ ADM scoop, XS Power full exhaust (1 7/8" LT headers with 3" off-road pipes), VMAX CNC-ported TB, LSR adjustable sway bars, LPE rear end-links, BMR 1" drop, BMR polyurethane bushings; UMI trailing arms & toe rods. Built & tuned by Kraftworks. 755 rwhp/708 rwtq

12-09-2010, 10:32 AM	#3
fldrummer "Black Ace" Drives: Supercharged 2010 SS, 2016 Golf R Join Date: Aug 2008 Location: Ft. Lauderdale, FL Posts: 1,352	Nevermind; I found it on your website. However, your initial description says you're east of I-95, but you're actually west--might want to correct that. __________________ 2010 2SS/RS M6 "Black Ace" - Delivered 6/4/2009 Mods: Forged 416 LS3, Maggie TVS 2300 SC (~11 psi), custom cam (232/247, .630/.630, 118 LSA), 90-lb. injectors, ZL1 fuel pump & ADM controller, Alky Control meth kit, Monster LT1-SC twin-disk clutch, ZL1 drivetrain conversion w/ DSS 1000-HP axles & 1-pc. driveshaft, CAI Inc. intake w/ ADM scoop, XS Power full exhaust (1 7/8" LT headers with 3" off-road pipes), VMAX CNC-ported TB, LSR adjustable sway bars, LPE rear end-links, BMR 1" drop, BMR polyurethane bushings; UMI trailing arms & toe rods. Built & tuned by Kraftworks. 755 rwhp/708 rwtq

12-13-2010, 07:59 AM	#7
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	So only a 2010? No 2011? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 05:52 PM
Modern Camaro Performance Parts - www.PartsTaxi.com	PartsTaxi.com	Sponsor Announcements / Giveaways / Contests	0	10-06-2010 04:26 PM
Latest Camaro Products - March 2010	Sean@Phastek	V8 Bolt-Ons & Tunes	26	08-04-2010 04:42 PM

12-09-2010, 11:32 PM	#4
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Sending a PM... And yes, our website has some flaws. Another reason why we canned our web guy! Thanks for the heads up. Erik@Lashway ---COME ON!!! WE NEED A 2010

12-10-2010, 01:04 PM	#5
swansor Drives: 2010 2SS ABM Join Date: Jul 2009 Location: Boca Raton, Fl Posts: 374	I have an L99 with CAI and MBRP exhaust.

12-13-2010, 07:29 AM	#6
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	pm sent...

12-15-2010, 11:49 AM	#8
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	anything with L92s....2011 is fine!

12-15-2010, 11:59 AM	#9
baranowski Drives: 1968 Bronco,2001 Fatboy,2010 SS Join Date: Jan 2010 Location: Southeast Posts: 713 View My Garage	2010 1 ss manual in daytona.

12-15-2010, 12:01 PM	#10
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Whats your availbility?

12-30-2010, 06:18 AM	#11
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	All PMs returned