06-26-2013, 06:43 PM | #1 |
Drives: 2010 CAMARO RALLY YELLOW SS/RS/M6 Join Date: Aug 2012
Location: Aransas Pass Texas
Posts: 565
|
installed headers, can't get dipstick back in...HELP!!!
just installed the 2"TSP headers and now i can't get the dipstick back in.
whats the trick to doing this???? HELP!!!
__________________
I LIKE TO GO FAST!
Lethal Racing Night Fury Cam Kit, Melling oil pump, C5R Timing Chain, Dyno Tuned by Shawn@Lethal Racing, Vararam Tuned intake, Vararam Power Wedge, LSR Tri Ax Short throw Shifter, VMAX Ported T/B, TSP 2" L/T Headers, TSP Cat delete, Borla axle back exhaust, Innovate A/F monitor, 471.7 HP/438.8 TQ |
06-26-2013, 06:47 PM | #2 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
Have someone lie under car and guide it in while someone angles it in from top is easiest. It can be done by one person but you have to get it at the correct angle as it doesn't drop straight down.
|
06-26-2013, 06:51 PM | #3 |
Drives: 2011 Camaro 2ss/rs ls3 Join Date: May 2013
Location: Missouri
Posts: 27
|
Definately a trick to it, my 16 year old son can do it by himself on the first try. Which is both great and annoying at the same time. lol
|
06-26-2013, 07:44 PM | #4 |
PHAT B33
Drives: 2012 TF3 Camaro 2SS/RS M6 Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,460
|
I used the Force.
__________________
Another 1 of 371 '12 T3 LS3 M6's built.
|
06-26-2013, 07:48 PM | #5 |
Drives: his wife crazy buying mods Join Date: May 2012
Location: Gilmer, TX
Posts: 1,342
|
Definitely can be tricky. The last time I had trouble I put my work light under the motor on the concrete pointed upward and bam there was the hole. Just guided it in and some. Not the most conventional route bit its worked twice.
__________________
Gone But Not Forgotten
|
06-26-2013, 08:22 PM | #6 |
|
I got it on the first try. What's the problem? there is no trick. You just have to know where it is behind one of the primaries and feel it in. Kinda like your "first time"
|
06-26-2013, 09:02 PM | #7 |
Drives: 79 transam with 582cid dart motor Join Date: Jun 2010
Location: missouri
Posts: 529
|
Find the hole with your finger first then guide it in...lol
__________________
2010 Camaro (inferno orange, 2SS, RS and such) cat backs, catch can, CAI on the way 79 Transam, 582 cid dart motor 779hp 315's out back 40spline gdaxles tko tranny |
06-26-2013, 09:03 PM | #8 |
Drives: 79 transam with 582cid dart motor Join Date: Jun 2010
Location: missouri
Posts: 529
|
Really its not that bad, keep at it you will get it done
__________________
2010 Camaro (inferno orange, 2SS, RS and such) cat backs, catch can, CAI on the way 79 Transam, 582 cid dart motor 779hp 315's out back 40spline gdaxles tko tranny |
06-26-2013, 09:04 PM | #9 |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,687
|
|
06-26-2013, 09:09 PM | #10 |
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,019
|
Sometimes you need to lick on the hole for a little bit before trying to put the dipstick in.
Wait a minute.....what are you guys talking about?
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
06-26-2013, 09:17 PM | #11 |
9691 & 97586
Drives: 2010 SS, 1999 SS, 1993 Z28 Join Date: Mar 2009
Location: Sanford, NC
Posts: 2,814
|
Its not hard... actually it'll go right back in once you get it started. Just make sure you are starting in the right spot...
Sent from my Apple sued Galaxy Note 2
__________________
|
06-27-2013, 08:14 AM | #12 |
Drives: '11 2SS/RS A6 Join Date: Apr 2011
Location: New Orleans
Posts: 504
|
lol.....back to the OP. I did it myself and it was not easy. I put the dipstick back in the tube because it is longer than the tube. The amount of the dipstick that extends beyond the tube is really helpful in guiding the tube back in place.
Ya know....no matter how you try and type this....it is damn funny..... Oh, I also found it helpful to remove the heat shield by the starter but it was a PITA to re-install. Hope this helps.
__________________
Performance Mods:
Kooks 1-7/8 LTs; Calico coated w/HFCs, Solo Mach XL catback w/J-pipes, VMax TB, C.A.I. Intake, JRE Tune, RX Catch-Can |
06-27-2013, 09:49 AM | #13 | |
Drives: 2012 Camaro SS/RS Convertible Join Date: Feb 2013
Location: Wyoming, MI
Posts: 566
|
Quote:
ANNNND... that what she said.
__________________
|
|
06-27-2013, 10:03 AM | #14 |
Drives: 2010 CAMARO RALLY YELLOW SS/RS/M6 Join Date: Aug 2012
Location: Aransas Pass Texas
Posts: 565
|
thanks for the help!!!
just wasnt holding my tongue right!!!! slid right in this morning!!!
__________________
I LIKE TO GO FAST!
Lethal Racing Night Fury Cam Kit, Melling oil pump, C5R Timing Chain, Dyno Tuned by Shawn@Lethal Racing, Vararam Tuned intake, Vararam Power Wedge, LSR Tri Ax Short throw Shifter, VMAX Ported T/B, TSP 2" L/T Headers, TSP Cat delete, Borla axle back exhaust, Innovate A/F monitor, 471.7 HP/438.8 TQ |
|
|
|
|